Product Details
Lamborghini Gallardo with Cast Iron Rotors 2011, Stage 25 Slotted Front Brake Kit by EBC®. EBC Racing™'s fully-floating 2-piece brake discs combined with performance brake pads represent the ultimate braking upgrade for high powered vehicles driven fast on road or participating in the occasional trackday.
Specifications
| Driving Style: Performance / Racing |
| FMSI Cross Reference: D1029 |
| Outside Diameter: 365mm (14.4") |
| Rotor Construction: 2-Piece |
| Rotor Material: Cast Iron |
| Rotor Style: Slotted |
| Width Pad A: 85mm (3.35") |
| Height Pad A: 75mm (2.95") |
| Thickness Pad A: 14mm (0.55") |
Includes
- Rotors: SG2F010 (2 per Pack)
- Pads: DP31513C (4 per Pack)
Features
- Angled slots on rotor surfaces allow superior expulsion of heat, water, brake dust, and friction gases
- Round indents in the rotors surface further increase cooling without the risk of cracking that drill-through holes pose
- Brake rotors are unidirectional to the left and right side of your vehicle to maximize effectiveness
- The bells are precision machined from aerospace grade aluminum
- All bobbins are machined from a single piece of stainless steel
- Superior ceramic pad compounds resist heat buildup, dust, and squealing
- Ceramic pad compounds wear slower and last longer than OEM equipment
- Ceramic pads eliminate squealing under the most extreme cold or hot temperatures
- EBC lowest dust fast street pad with 15% brake improvement
- Capable of repeated heavy brake use without brake “Fall-Off”
- Very minimal disc or rotor damage characteristics
- Superb material for Prestige imports European and Asian cars
- ECE R 90 type approved for most cars
- Features red brake in surface coating for instant safe braking after install
- Sold as a set for two wheels
EBC Racing's 2-piece fully-floating brake discs are engineered from the finest materials without compromise, resulting in one of the highest quality 2-piece brake discs available in today's marketplace. These discs are equally at home on the road or at the race track.
Outer friction rings are cast from high-carbon G3500 disc alloy, giving excellent wear properties and crack resistance even after heavy on-track use. EBC's patented stainless steel SD-Drive bobbins allow the braking ring to float freely and independently of the centre bell, reducing stresses and eliminating the chance of warping, whilst each bobbin location features an anti-rattle clip for totally silent operation. All discs feature 48 curved vanes and are handed to each side of the car allowing effective heat dissipation.
EBC Racing's 2-piece discs often offer a weight saving over OEM parts, helping to reduce rotational un-sprung mass that has a positive effect on driving dynamics. Additionally, when the disc eventually becomes worn, the hub can be retained replacing only the outer friction ring which reduces long term operating costs.
Redstuff™ Ceramic Low Dust Brake Pads by EBC are replacement brake pads that are made with a Kevlar-based fiber compound enhanced with ceramic particles instead of metallic steel wool found on 99% of vehicles from manufacturers today. Formulated specifically for heavier cars and trucks with high levels of performance, Redstuff™ pads can handle the heat generated by heavy loads and provide long life while generating minimal dust residue. While they provide a more gradual level of grip than EBC Yellowstuff™ pads, their braking power is nonetheless a substantial improvement over semi-metallic brake pads. During independent tests at 100 miles per hour, Redstuff™ brake pads have been shown to reduce the distance it took to stop some vehicles by 50 feet. In the real world, that's three car lengths – a remarkable safety improvement when what's important is on the line.
Ceramic brake pads are used in Formula 1, Nascar, and most forms of championship racing for many reasons. When braking at sustained speeds of over 200 miles per hour, enough heat is generated on brake components to make rotors glow. Ceramic brake pads offer the ability to stay cool under the most severe conditions. Used with perforated rotors, heat buildup is reduced so much that brake fade from fluid reaching boiling temperature is all but eliminated. While you may not drive under these conditions, the benefits of these pads can be enjoyed at any speed. Ceramic brake pads are far quieter due to their higher resonant frequency undetectable by human ears, and once the initial bed-in period of 1,500-miles has passed, you'll rarely hear any noise from Redstuff™ pads. Equally important, the brake dust that ceramic pads produce is far less, finer in consistency, and non-adhesive to wheel surfaces. You don't need to drive on a racetrack to enjoy the benefits Redstuff™ ceramic brake pads offer, and we offer them at a value-packed price that matches what some dealers charge for traditional pads.
Founded and based in the United Kingdom, EBC Brakes® is a premiere producer of brake components for passenger cars, trucks, buses, motorcycles, ATVs, and even scooters. EBC brake pads and rotors are preferred by fleet operators of emergency vehicles, livery cabs, and by discerning racers all over the world for the effective grip, superior lifespan, resistance to heat buildup, and proper fit they deliver. From the company president down to every employee, EBC strongly believes that brake components that are truly superior must be constructed from the most effective materials and also offer the lowest environmental impact possible. Likewise, EBC will never put their name on any products that cut corners in development, quality control, or are manufactured using sweatshop working conditions where human rights are not valued. When you want the best, most responsible brake components that meet or exceed OEM specification without dealer OEM markup, EBC Brakes is the only name you need to know.