$170.84 - $247.66
In Stock - Ships in 24 to 48 hrs
2010 Hyundai Santa Fe
Fits Following Model(s):
  • 2.4L / 3.5L
Product Options
Add To Cart
Interested in this item?
ADD TO WISH LIST
Have a Question? 888.634.9437
Ask a Specialist: Live Chat
Authorized Dealer:EBC Brakes
Low Prices. Price match guarantee
Guaranteed Fitment. Always the correct part
In-House Experts. We know our products
Easy Returns. Quick & Hassle Free
Select Product Options
ENGINE:
Please Select
    Total: $0.00
    Add To CartCancel

    Product Details

    EBC Brakes

    Hyundai Santa Fe 2.4L / 3.5L 2010-2012, Stage 13 Light Street Plain Brake Kit by EBC®. Replace your old, worn out brakes with better performing pads and rotors from EBC. The Stage 13 Sport Brake Kit is designed to increase your stopping power and produce less brake dust than your stock brakes. The anodized layer is designed to disappear in the area that the brake pads contact the rotor.

    EBC Brakes - Product LineEBC Brakes - FAQsEBC Brakes - About

    Specifications:

    Centre Hole Diameter: 69mm (2.72")
    Driving Style: Performance / Racing
    Rotor Construction: 1-Piece
    Rotor Style: Plain

    Features:

    • Sized and shaped to original equipment specifications with extremely tight tolerances
    • Designed to meet or reduce factory levels of heat buildup, brake noise, vibration, and wear
    • Black GEOMET and NITROTHERM™ anti corrosive finish
    • Recommended by EBC for normal street driving, high performance street driving, truck or SUV use, drifting, and short track runs
    • High quality "gray" iron features a higher carbon content to reduce brake shudder, heat cracking, and high-frequency vibrations which cause squealing
    • Vented center allows air to pass between both rotor sides for more effective cooling
    • EBC recommends a 500 mile break in period with lighter braking application
    • Designed to provide an optimum combination of street and racetrack performance
    • Unique composition allows high braking friction when brakes are cold
    • Features a cold friction rating of 0.5
    • Backing plate and side edges of brake pad are yellow powder coated for resistance to corrosion
    • Pad surfaces have chamfered edges to reduce contact against rotor lip that forms over time and causes squealing
    • Center gap allows for proper heat expansion of brake pads
    • Built in noise-reducing shims
    • Provides equivalent performance to GG-rated brake pads
    • Patented Brake-In™ red pad surface coating provides better grip during the first 100 miles after new pads are installed
    • Patented Brake-In™ red pad surface coating scours off any existing glaze or heat spots from brake rotor surface for more even surface mating

    Rotor Benefits:

    • Perfect for non-aggressive driving
    • Ensure quiet operation
    • Offer low dust and long pad life
    • Vented design provides much faster heat dissipation
    • More resistant to warping or cracking

    Why pay dealership prices that are marked up 100% when you can purchase EBC high-quality RK Series Premium OE Replacement rotors for less? Unlike cheaper, inferior replacement rotors that may look identical to original equipment, EBC builds these to match original factory dimensions and machines them to extremely tight tolerances. But they did not stop there. EBC has applied their engineering expertise to create an iron compound that exceeds the quality of most original material blends, so these rotors actually improve on factory levels of heat buildup, brake noise, vibration, and wear. A higher percentage of carbon and silicone is present which leads to the formation of graphite during the curing process. When graphite is present, the rotor itself takes on qualities of a denser, softer material. Heat is more evenly dispersed to reduce warping, cracks are less likely, and vibration-related noise is greatly reduced. RK Series Premium OE Replacement Rotor Kit is anodized for corrosion resistance, and rotors should be fully ready for performance driving after a 500 mile break-in period.

    The world-renowned brake experts at EBC have developed over a dozen variations of performance brake components, and each one is crafted to provide a superior level of grip, wear, and performance for uniquely different vehicle sizes, weights, and applications. When the company engineers who created pads that can survive 1,800 degree temperature test runs turn their attention to creating equally impressive brake rotors, you will see rotors finely tuned to deliver impressive looks behind your wheel spokes and last run performance that’s as equally impressive as your first. If you’ve been let down by underperforming brake rotors that didn’t last as long as they should, RK Series Premium OE Replacement Rotor kit is designed for the long run. If installed at the same time as a new set of EBC long life brake pads, it’s not uncommon for these rotors to last the length of the first set with more than enough life to be used with a second set. All EBC brake rotors are cast to a high metal strength rating of 150 newton meters and are precision CNC machined to be within tolerances of less than 0.05 millimeters. RK Series Premium OE Replacement Rotor Kit is the result of relentless testing and refinement, and when better brake rotors are built it is EBC that will build them.

    EBC Yellowstuff 1793 compound is a true winner all round, it has high friction from cold, not requiring warm up for street use yet when loaded up and really hot the brakes just get better. Even up to truck weights these pads grip and do not heat fade. They also suitable and the most fastest brake pads for Trackday and Drift racing. EBC yellows are ECE Brake safety tested which means they must work perfectly from cold at least as good or better than stock pads. When Yellowstuff see some heat (which is not tested for in the ECE R 90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.

    Founded and based in the United Kingdom, EBC Brakes® is a premiere producer of brake components for passenger cars, trucks, buses, motorcycles, ATVs, and even scooters. EBC brake pads and rotors are preferred by fleet operators of emergency vehicles, livery cabs, and by discerning racers all over the world for the effective grip, superior lifespan, resistance to heat buildup, and proper fit they deliver. From the company president down to every employee, EBC strongly believes that brake components that are truly superior must be constructed from the most effective materials and also offer the lowest environmental impact possible. Likewise, EBC will never put their name on any products that cut corners in development, quality control, or are manufactured using sweatshop working conditions where human rights are not valued. When you want the best, most responsible brake components that meet or exceed OEM specification without dealer OEM markup, EBC Brakes is the only name you need to know.

    Warranty Information

    AUTOMOTIVE DISC BRAKE PADS

    The EBC Brakes warranty covers defects in materials or workmanship only. Warranty is for replacement of similar product or refund of purchase value only excluding all labor and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is good for a period of twelve months from date of purchase or 10,000 miles of highway use. Proof of mileage will be required. Warranty is invalid if product is used for taxi/hire car, racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Warranty does not cover brake noise or normal wear and tear. Some brake pad systems cause pads to wear faster than others. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.

    AUTOMOTIVE DISC BRAKE ROTORS

    Warranty is for replacement of similar product or refund of purchase value only excluding all labor and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is valid for a period of six months from date of purchase or 10,000 miles of highway use. Warranty is invalid if product is used for racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.

    No warranty is offered for brake vibration suffered due to uneven rotor thickness wear after incorrect installation of brake rotors. It is commonly known in the brake rotor business that accurate mounting and checking of runout on brake rotors is paramount at installation and in spite of necessary warnings, many mechanics still see fit to ignore this warning and make no effort whatsoever to check rotor runout. This leads to brake vibration in the 3-5,000 miles lifetime period and is not a warrantable condition. The solution for vibration at this stage is to have the rotors turned or replaced and to thoroughly clean the mounting flange on the vehicle and carefully check for runout before returning the vehicle to service use.

    A proof of purchase receipt showing the date of purchase and mileage installed, endorsed by an independent mechanic who fitted the parts or a store staff member who sold you the parts will be required to be returned with all of the products purchased. In the event of a successful compensation award, the company will refund the credit card that you used to buy the replacement parts in full or part depending on the nature of the claim. EBC Brakes reserves the right to make full or partial compensation at its sole discretion, depending upon the condition and mileage used of the returned suspect parts. For example, if you have used the product for several thousand miles and the defect is noticed, only a partial compensation may be offered.

    Magnuson-Moss Warranty Act:
    Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.