1986 Mazda RX-7 Performance Suspension

Change Vehicle
1 - 60 of 464 results
show:
sort by:
    • (0 reviews)
      # 230561264
      Mazda RX-7 1986, Asphalt Rally Front and Rear Adjustable Coilovers by KSport®. Quantity: 4 per Pack. Includes: Front Camber Plates, Without Rear Camber Plates, P/U, ATM. Ksport Asphalt Rally coilover systems are designed...
      Set of 4 coilovers with beefed up components that are biased toward longer-distance asphalt rally competitionAll metal pillowball for added strength and responsiveness: A step up from Kontrol Pro coilovers, the heavy duty all steel pillowball adds more strength and better steering response. You may experience slightly more noise with this type of pillowball, which is completely normal when compared to oem suspension where noise is reduced by using rubber parts. KSport patented new top nut and bearing system helps combat noise while turning at slow speeds unlike other coilovers on the market.
      $1,350.00
    • (0 reviews)
      # 230561265
      Mazda RX-7 1986, Drag Race Front and Rear Adjustable Coilovers by KSport®. Quantity: 4 per Pack. Includes: Front Camber Plates, Without Rear Camber Plates, P/U, ATM. The Ksport Version DR coilover system is specially engineered for...
      Set of 4 coilovers designed for the rigors of road racing (not intended for normal everyday street use)Spring rates and shock valving specific for drag racing: Carefully chosen spring rates and shock valving to optimize weight transfer while launching. KSport designs each kit differently depending on if your car is FWD, RWD or AWD. Not intended for daily driving use.
      $1,260.00
    • (0 reviews)
      # 14873562
      Mazda RX-7 1986, GT Pro Front and Rear Adjustable Coilovers by KSport®. Quantity: 4 per Pack. Includes: Front Camber Plates, Without Rear Camber Plates, P/U, ATM. Ksport GT Pro Damper System provides the ultimate in suspension...
      Set of 4 coilovers with beefed up components that are biased toward racetrack useInverted steel shock absorber for increased response and heat build up: The main focus of KSport GT Pro damper systems is that they feature an inverted front design. Inverted shocks move the gas/oil chamber farther away from the knuckle and braking system reducing heat transfer. This design also reduces unsprung weight which helps improve handling and responsiveness. NOTE: on inverted shocks the damping knob is at the bottom of the shock. Each kit is supplied with a flexible damping adjustment knob for easier access.
      $1,305.00
    • (0 reviews)
      # 14873417
      Mazda RX-7 1986, Kontrol Pro Front and Rear Adjustable Coilovers by KSport®. Quantity: 4 per Pack. Includes: Front Camber Plates, Without Rear Camber Plates, P/U, ATM. Ksport Kontrol Pro Fully Adjustable Coilover Kits provide the...
      Set of 4 coilovers designed with both road racing and street driving in mind36 way adjustable damping: All Ksport coilovers offer 36 levels of damping which allow you the ability to perfectly dial in your coilover system. Set damping to full soft for a nice comfortable cruising setting for normal driving
      $900.00
    • (0 reviews)
      # 230561266
      Mazda RX-7 1986, Road Racing Front and Rear Adjustable Coilovers by KSport®. Quantity: 4 per Pack. Includes: Front Camber Plates, Without Rear Camber Plates, P/U, ATM. Ksport Version RR coilover System is built specifically for...
      Built for racing: Strictly made for track racing only, not recommended for street use. Aggressive spring rates and shock valving combined with 20-30mm shorter shock stroke = unbeatable performance on the track. Your choice of KSport proven spring rate settings or your own custom rates; the shocks will be valved specifically to what you select.Upgraded shock bumpstops: Version RR damper systems come with upgraded bumpstops to prevent the shock from bottoming out over uneven pavement or harsh road conditions.
      $1,260.00
    • (0 reviews)
      # 230561267
      Mazda RX-7 1986, Slide Kontrol Drift Front and Rear Adjustable Coilovers by KSport®. Quantity: 4 per Pack. Includes: Front Camber Plates, Without Rear Camber Plates, P/U, ATM. Ksport Slide Kontrol Drift coilover Systems provide the...
      Inverted steel shock absorber for increased response and heat build up: Vehicles with McPherson suspension will come standard with inverted front shocks whereas wishbone/a-arm type vehicles will come with standard non-inverted type shocks. Inverted shocks move the gas/oil chamber farther away from the knuckle and braking system reducing heat transfer. This design also reduces unsprung weight which helps improve handling and responsiveness. NOTE: on inverted shocks the damping knob is at the bottom of the shock. Each kit is supplied with a flexible damping adjustment knob for easier access.Stiffer spring rates and shock damping: Slide Kontrol damper systems are configured with about 30-50% stiffer shock damping compared to the Kontrol Pro system. Stiffer spring rates assist in better initiations while drifting. Helper springs are included in certain applications depending on spring length and shock stroke.
      $1,350.00
    • (0 reviews)
      # 89622480
      Mazda RX-7 1986, Front and Rear Coilover Kit by Cusco®. Quantity: 4 per Pack. Cusco suspension coil-over kits are used by professionals across the world in various genres of motorsports including; dirt/gravel rally racing, circuit...
      Made in Japan with proper quality controlCusco products are derived straight from the field of motorsports
      $1,896.30
    • (0 reviews)
      # 86774977
      Mazda RX-7 1986, D1 Spec Front and Rear Adjustable Coilovers by Buddy Club®. Quantity: 4 per Pack. Includes: (2) Front Coilovers, (2) Rear Coilovers, Hardware. N+ and D1 SPEC DAMPER from Buddy Club is the choice complete suspension...
      Ride-Height Adjustable15 Level Adjustment
      $1,250.00
    • (0 reviews)
      # 85543292
      Mazda RX-7 1986, Racing Spec Front and Rear Adjustable Coilovers by Buddy Club®. Quantity: 4 per Pack. Includes: (2) Front Coilovers, (2) Rear Coilovers, Hardware. "Racing Spec Damper" is the perfect complete suspension kit with...
      15 Level AdjustmentAdjustment Bracket
      $1,600.00
    • (0 reviews)
      # 14870041
      Mazda RX-7 With FC3S Chassis 1986, Airtech Basic™ Front and Rear Air Suspension System by KSport®. Front Upper Mount: Rubber. Rear Upper Mount: Aluminum. KSport offers air suspension kits ranging from no frills with manual paddle...
      All air suspension kits include 4 air springs with height adjustability and 36 levels of damping adjustmentBasic kit features 1 Viair 380C air compressor, while Deluxe and above kits feature 2 Viair 380C air compressors
      $2,755.00
    • (0 reviews)
      # 14870042
      Mazda RX-7 With FC3S Chassis 1986, Airtech Deluxe™ Front and Rear Air Suspension System by KSport®. Front Upper Mount: Rubber. Rear Upper Mount: Aluminum. KSport offers air suspension kits ranging from no frills with manual...
      All air suspension kits include 4 air springs with height adjustability and 36 levels of damping adjustmentBasic kit features 1 Viair 380C air compressor, while Deluxe and above kits feature 2 Viair 380C air compressors
      $3,325.00
    • (0 reviews)
      # 14870045
      Mazda RX-7 With FC3S Chassis 1986, Airtech Executive™ Front and Rear Air Suspension System by KSport®. Front Upper Mount: Rubber. Rear Upper Mount: Aluminum. KSport offers air suspension kits ranging from no frills with manual...
      All air suspension kits include 4 air springs with height adjustability and 36 levels of damping adjustmentBasic kit features 1 Viair 380C air compressor, while Deluxe and above kits feature 2 Viair 380C air compressors
      $5,225.00
    • (0 reviews)
      # 14870044
      Mazda RX-7 With FC3S Chassis 1986, Airtech Pro Plus™ Front and Rear Air Suspension System by KSport®. Front Upper Mount: Rubber. Rear Upper Mount: Aluminum. This digitally controlled air suspension kit offers all the benefits of...
      One kit that includes 4 air springs with a height adjustment range of 4.7 to 7.8 inches depending on vehicle applicationOffers all the benefits of the Airtech Pro kit but adds 4-wheel independent control
      $4,370.00
    • (0 reviews)
      # 14870046
      Mazda RX-7 With FC3S Chassis 1986, Airtech Front and Rear Air Strut Assemblies by KSport®. Quantity: 4 per Pack. Front Upper Mount: Rubber. Rear Upper Mount: Aluminum. This is a complete air strut assembly that matches the design...
      Replacement air strut assembly that matches design of those found on complete KSport kitsSave money by replacing only a damaged or worn air strut instead of an entire kit
      $1,995.00
    • (0 reviews)
      # 17801816
      Mazda RX-7 without Electronic Adjustable Suspension 1986, AGX™ Strut by KYB®. Quantity: 1 per Pack. Whether you simply drive in town or prefer a firm, aggressive ride all the time, AGX Shocks and Struts by KYB are a great choice....
      Designed for handling precision and ride composureExternally adjustable without lifting the vehicle or removing the tires
      $87.96 - $115.78
    • (0 reviews)
      # 87064388
      Mazda RX-7 Without Adjustable Suspension With FC3S Chassis 1986, HP Series™ Strut by Tokico®. Quantity: 1 Per Pack. TOKICO suspension strut is designed to meet the growing demand of modern vehicles for tough bottoming resistance....
      Twin-Tube internal designHigh performance quality
      $110.16 - $145.87
    • (0 reviews)
      # 87064391
      Mazda RX-7 Without Adjustable Suspension With FC3S Chassis 1986, Illumina Series™ Strut by Tokico®. Quantity: 1 Per Pack. TOKICO suspension strut is designed to meet the growing demand of modern vehicles for tough bottoming...
      Twin-Tube internal designHigh performance quality
      $174.81 - $216.53
    • (0 reviews)
      # 40881518
      Mazda RX-7 Base / GXL 1986, B6 Series Heavy Duty Driver or Passenger Side Monotube Shock Absorber and Strut by Bilstein®. Quantity: 1 per Pack. Finish: Yellow Paint. Upper Mounting: Stem. Without Boot. If you expect more damping...
      Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loadsOptimum adhesion and enhanced lane change stability in both day to day and extreme situations
      $143.43 - $176.00
    • (0 reviews)
      # 12528015
      Mazda RX-7 Base / GXL / Turbo With Chassis Up to no. 8D*X 199999 1986, Anti-Sway Bar Kit by ST Suspensions®. Includes: Anti-Sway Bar. Boost the handling of your vehicle to more sophisticated levels with premium, one-piece front and...
      Set of front and rear anti-roll sway barsEffectively decreases suspension lean and side-to-side body roll around turns
      $199.99 - $409.98
    • (0 reviews)
      # 206721137
      Mazda RX-7 1986, Sustec Sway Bar by Tanabe®. Built for the driving enthusiast, the Sustec Stabilizer emininates roll for exceptional stability and maximum tire contact patch and grip. Unique to the Sustec Stabilizer is it's FULL...
      Designed to boost your vehicle’s performanceEngineered to excel in quality and durability
      $169.10
    • (0 reviews)
      # 206720686
      Mazda RX-7 1986, GF210 Series Lowering Coil Springs by Tanabe®. Spring Rate F/R: 3.1 / 2.6 kg/mm. Sustec performance lowering springs are available in three configurations, to suit the driver's needs for lowering, comfort, and...
      Designed to boost your vehicle’s performanceEngineered to excel in quality and durability
      $237.50
    • (0 reviews)
      # 89622476
      Mazda RX-7 1986, Front Type AS Strut Bar by Cusco®. Quantity: 1 per Pack. Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension...
      Made in Japan with proper quality controlCusco products are derived straight from the field of motorsports
      $144.00
    • (0 reviews)
      # 89623237
      Mazda RX-7 1986, Type OS Strut Bar by Cusco®. Quantity: 1 per Pack. Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension...
      Made in Japan with proper quality controlCusco products are derived straight from the field of motorsports
      $180.00
    • (0 reviews)
      # 89622477
      Mazda RX-7 1986, Rear Type 40 Strut Bar by Cusco®. Quantity: 1 per Pack. Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension...
      Made in Japan with proper quality controlCusco products are derived straight from the field of motorsports
      $216.00
    • (0 reviews)
      # 89622478
      Mazda RX-7 1986, Rear Type OS-T Strut Bar by Cusco®. Quantity: 1 per Pack. Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension...
      Made in Japan with proper quality controlCusco products are derived straight from the field of motorsports
      $144.00
    • (0 reviews)
      # 206720687
      Mazda RX-7 1986, Sustec Front Strut Tower Braces by Tanabe®. The strut tower bar is arguably one of the least expensive upgrades that can provide a very high degree of benefit that is felt immediately after installing. Often one of...
      Designed to boost your vehicle’s performanceEngineered to excel in quality and durability
      $132.05
    • (0 reviews)
      # 89622474
      Mazda RX-7 1986, Front Lower Arm Bar by Cusco®. Type: Ver. 1. Strut Tower Bars eliminate chassis flex at the most vital area of the car - between the strut towers, essentially to prevent the misalignment of suspension mounting...
      Made in Japan with proper quality controlCusco products are derived straight from the field of motorsports
      $120.60
    • (0 reviews)
      # 206720688
      Mazda RX-7 1986, Sustec Front 2 Point Subframe by Tanabe®. Often overlooked, especially on vehicles that are reaching higher levels of modification, is the importance of reinforcing the chassis. All vehicles experience flexing of...
      Designed to boost your vehicle’s performanceEngineered to excel in quality and durability
      $112.10
    • (0 reviews)
      # 210777685
      Mazda RX-7 1986, Ball Joint by Ingalls Engineering®. Designed utilizing the latest technology, this productfeatures premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle, it is manufactured...
      Impeccable design and modern-day technologyFlawless craftsmanship and excellence in every detail
      $85.09
    • (0 reviews)
      # 7610190
      Mazda RX-7 Base / GXL / Turbo With 13B Chassis 1986, Pro-Alignment Front Camber Bolts by Eibach®. Camber: from -1.75 to +1.75 Degrees. Quantity: 2 per Pack. Bolt Diameter: 0.472". These alignment kits not only assist in adjusting a...
      Turns Horsepower into Hook-upConsistently Lowers 1/4-mile ET's
      $27.74
    • (1 review)
      # 78863593
      Mazda RX-7 1986, Triple C Camber Adjustment Bolts by H&R®. Quantity: 1 per Pack. Diameter: 0.47". Strut Bracket Width: 1.57"-1.90". The application is compatible with H&R struts and stock struts. Adjustment range is -1.0° to...
      100% Made in GermanyIncreased safety
      $54.84
    • (0 reviews)
      # 40118636
      Mazda RX-7 1986, Control Arm Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front upper and...
      See Product Options for replacement bushing kits for lower and upper control arms, torsion arms, trailing arms, and track armsHigh-density polyurethane construction provides a superior cushioning effect and resists drying up and crumbling the way rubber mounts can
      $12.30 - $50.00
    • (0 reviews)
      # 11094185
      Mazda RX-7 1986, Front Sway Bar End Link Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension offers replacement polyurethane bushings for mounting points on shock absorbers, rear Watts Link arms,...
      Kit provides parts for left and right front sway bar end linksBushing sets include reinforced, zinc-coated steel tubes for mounting
      $16.66
    • (0 reviews)
      # 40013258
      Mazda RX-7 1986, Sway Bar Bushings by Energy Suspension®. Performance. Material: Polyurethane. These are sets of replacement polyurethane bushings designed to exceed factory OEM levels of vibration dampening and support at the...
      Set of replacement polyurethane sway bar bushings (designed for front or rear applications) that meet or exceed OEM levels of vibration dampening refinementChoose the Front or Rear set that includes reinforced, zinc-coated outer steel mounting sleeves, or individual bushings-only sets
      $12.11 - $16.17
    • (1 review)
      # 121270331
      Mazda RX-7 1986, Hyper-Flex™ System Master Set by Energy Suspension®. Includes: Front and Rear Control Arm Bushing, Front 0.9449" and Rear 0.5512" Sway Bar Bushings, Ball Joint and Tie Rod End Boots. Performance. Material:...
      Includes bushing sets for front & rear control arms, front & rear track bars, and front sway barsGreater resilience of polyurethane adds support and stability under aggressive driving or load carrying conditions
      $106.72 - $109.80
    • (0 reviews)
      # 157532713
      Mazda RX-7 1986, Sway Bar Endlink Bushings by Prothane®. PROTHANE™ urethane end link kits improve stability, handling and durabilty. If your vehicle uses standard length end links, use this guide to find the correct kit. With the...
      High quality at an affordable priceExpertly made from premium materials
      $30.87
    • (0 reviews)
      # 61596981
      Mazda RX-7 Base / GXL / Turbo 1986, Front Camber Adjustment Bolt Kit by Whiteline®. Adjustment Range: +/- 1.5 Degrees Camber. Quantity: 2 per Pack. Inner Diameter: 12 mm (0.47"). Includes: Eccentric Bolts(2), Tab Washers(2), Lock...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $35.82
    • (0 reviews)
      # 89622475
      Mazda RX-7 1986, Pillar Side Bar by Cusco®. Pillar Side Bar eliminate chassis flex essentially to prevent the misalignment of suspension mounting points experienced during high cornering loads.
      Made in Japan with proper quality controlCusco products are derived straight from the field of motorsports
      $240.30
    • (0 reviews)
      # 210787075
      Mazda RX-7 1986, 10 mm Camber Wedge for 12 mm Strut Bolts by Ingalls Engineering®. Adjustment range of 0° to +2°. Order 1 per wheel. Designed utilizing the latest technology, this productfeatures premium quality and will perform...
      Impeccable design and modern-day technologyFlawless craftsmanship and excellence in every detail
      $28.75
    • (0 reviews)
      # 210784967
      Mazda RX-7 1986, Fastcam™ Adjuster, 12 mm Thread Length by Ingalls Engineering®. Adjustment range of 1°. Packaged as 1 Bolt per Box. Order 1 per wheel. For more adjustment see. PN 81250. Position: Front or Rear or Rear Lower....
      Impeccable design and modern-day technologyFlawless craftsmanship and excellence in every detail
      $20.03
    • (0 reviews)
      # 210784986
      Mazda RX-7 1986, Fastcam™ Bolts, 12 mm Thread Length by Ingalls Engineering®. Adjustment range of 2°. 2 bolts per box. Order 1 box per wheel. Position: Front or Rear. Designed utilizing the latest technology, this...
      Impeccable design and modern-day technologyFlawless craftsmanship and excellence in every detail
      $40.05
    • (0 reviews)
      # 157532777
      Mazda RX-7 1986, Sway Bar Bushings by Prothane®. Get better sway control around turns and enhanced handling with PROTHANE ™ urethane bushings! And, they last much longer than most rubber bushings. The effectiveness of OEM...
      High quality at an affordable priceExpertly made from premium materials
      $13.39 - $22.70
    • (0 reviews)
      # 157532835
      Mazda RX-7 1986, Total Bushing Kit by Prothane®. Includes Balls Joints Boots, C-Arm Front and Rear, Sway Bar Bushings, Tie Rod Boots. Below you will find charts indicating various Total Kit applications currently available. These...
      High quality at an affordable priceExpertly made from premium materials
      $89.52 - $96.52
    • (0 reviews)
      # 71663997
      Mazda RX-7 Base / GXL / Turbo 1986, Sway Bar Mount Bushings by Whiteline®. Outer Diameter: 34 mm (1.34"). Inner Diameter: 24 mm (0.94"). Whiteline sway bar products improve sway bar effectiveness for more balanced and predictable...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $17.82
    • (0 reviews)
      # 61951051
      Mazda RX-7 Base / GXL / Turbo 1986, Control Arm Bushings by Whiteline®. Worn control arm bushings have a huge influence on vehicle stability and braking efficiency. Replace these worn bushings with Whiteline control arm bushings...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $17.82 - $44.82
    • (0 reviews)
      # 157532753
      Mazda RX-7 1986, Control Arm Bushings by Prothane®. Controls unwanted wheel hop or shudder upon hard launching and helps overall handling. A vital addition to any vehicle are PROTHANE ‘s urethane control arm bushings! PROTHANE...
      High quality at an affordable priceExpertly made from premium materials
      $25.09 - $63.67
    • (0 reviews)
      # 17926828
      Mazda RX-7 1986, OESpectrum™ Driver or Passenger Side Strut by Monroe®. Quantity: 1 per Pack. Without Dust Shield. Without Extended Hydraulic Lockout. Strut Charging Type: Gas Charged Unit - Strut Rod Will Extend Automatically....
      Provide unprecedented handling precision and controlNitrogen gas charged
      $42.12 - $80.70
    • (0 reviews)
      # 17803985
      Mazda RX-7 GXL 1986, Excel-G™ Front Strut by KYB®. Quantity: 1 per Pack. Compressed Length: 12.6". Extended Length: 19.02". Restore your vehicle's original performance for normal driving conditions with this twin-tube gas...
      Designed to restore original handling and controlCalibrated to compensate for age and miles driven
      $71.21
    • (0 reviews)
      # 17817103
      Mazda RX-7 GXL 1986, Gas-a-Just™ Rear Driver or Passenger Side Strut by KYB®. Quantity: 1 per Pack. Compressed Length: 13.9". Extended Length: 21.54". Go with Gas-a-Just shocks and struts and experience greater stability,...
      Replacement for an OE monotube shock to restore/keep the vehicle's original performance characteristicsIdeal as an upgrade from an OE twin-tube for quicker, more responsive handling and control
      $49.95
    • (0 reviews)
      # 49810157
      Mazda RX-7 1986, Front Lower Control Arm and Ball Joint Assembly by Mevotech®. Quantity: 1 per Pack. Warranty: Lifetime or 60,000 Miles. The primary function of a control arm is to provide the connection point between the body of...
      Eliminates uneven steering, squeaking noise, and excessive tire wearAllocates vehicle body weight to the tire for vehicle stability and alignment
      $189.97
    • (0 reviews)
      # 98964990
      Mazda RX-7 1986, Front Lower Ball Joint by Mevotech®. Quantity: 1 per Pack. Experience improved ride comfort and smooth handling with the replacement Mevotech ball joints. They grip the control arm better and guarantee worry-free...
      Includes durable higher and lower metal bearings for a smoother and quiet handlingKnurling on the outer housing of the ball joint makes for a better grip with the control arm
      $27.08 - $29.79
    • (0 reviews)
      # 36210655
      Mazda RX-7 1986, Front Lower Ball Joint by Beck Arnley®. Quantity: 1 per Pack. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning...
      OE quality products from top original equipmentTop quality materials
      $51.46
    • (0 reviews)
      # 189891303
      Mazda RX-7 1986, Front Lower Bolt-in Type Ball Joint by MOOG®. Non-Greasable. Quantity: 1 per Pack. MOOG ball joints are the preferred choice of many professional technicians and incorporate proven design and advanced engineering...
      Engineered to retain socket torque and smooth articulation over the life of the part, to maintain tight steering feelExclusive powdered-metal bearing design allows grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
      $60.24
    • (0 reviews)
      # 64631693
      Mazda RX-7 1986, Premium™ Front Lower Ball Joint by Centric®. Quantity: 1 per Pack. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $20.40
    • (0 reviews)
      # 21690463
      Mazda RX-7 1986, Alignment Camber Kit by MOOG®. Quantity: 1 per Pack. With 0.47" (12mm) Bolts. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation even...
      Designed to make steering and suspension repairs easyDirect fit
      $15.88 - $16.60
    • (0 reviews)
      # 21644175
      Mazda RX-7 1986, Alignment Camber Wedge Kit by MOOG®. Adjustment Range: -2 to +2 Degree of Camber. Quantity: 2 per Pack. Includes: 2 Wedges, 2 Bolts and Nuts. Upgrade your vehicle to MOOG and experience a safe and comfortable ride....
      Designed to make steering and suspension repairs easyDirect fit
      $19.28
    • (0 reviews)
      # 79253463
      Mazda RX-7 1986, Premium™ Strut Bumper by Centric®. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE parts for consumers, mechanics and...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $16.32 - $22.21
    • (0 reviews)
      # 8820463
      Mazda RX-7 1986, Front Sway Bar Link by Genuine®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your time...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you're located
      $58.58
    • (0 reviews)
      # 17803986
      Mazda RX-7 GXL 1986, Front Strut Mount by KYB®. When replacing struts, it's also a great idea to replace strut mounts too. They optimize suspension performance by providing a smooth steering response and reduce vibration and road...
      On front struts, the mount includes a bearing that acts as a pivot for the steering mechanism, providing a smooth steering responseEnables accurate wheel alignment
      $39.79
    • (0 reviews)
      # 92769391
      Mazda RX-7 Without Auto Adjusting Suspension 1986, Strut Mount by Westar®. Westar is a widely recognized manufacturer and exporter of rubber to metal bonded parts for all types of trucks and automobiles. Every single product goes...
      Ideal fro Silencing the engine after OE mounts have worn outBuilt to last from the best rubber
      $13.29 - $30.21




    Guides & Articles

    • Off-Road Bumpers
      Skid Plates Provide The Ultimate In Off-Road Protection
      If you take your 4x4 off-roading, you have likely gained an appreciation of how unforgiving trails can be when it comes to your vehicle's underside. Deep ruts with rough edges can appear out of nowhere, sturdy-looking rocks can shift unexpectedly, and tranquil bodies of water can hide everything from sinkholes to fallen tree trunks. Before you know it, the underside of your truck has bounced off something hard enough to damage moving suspension components or puncture housings containing engine oil, gasoline, transmission fluid, or differential gear oil.
      May 18, 2016
    • Performance Suspension Parts
      How much lift is needed for larger tires on my 2007-up Jeep Wrangler?
      Twenty years after the first Jeep Wrangler model debuted in 1987, third-generation Wranglers were introduced for the 2007 model year. Unlike any previous Wranglers or CJs, a 4-door Unlimited model (known internally as the "JKU" body) was offered alongside the standard 2-door ("JK" body). Because it took the off-road capability Wranglers are known for and broadened it with the practicality of 4 doors for those needing a family vehicle, third-generation Wranglers have proven very successful in the marketplace. Maintaining Jeep tradition, this Wrangler appeals by offering a higher-than-average number of advantages for the 4x4 enthusiast, whether it's used for rock crawling or as an everyday driver.
      November 14, 2015
    • Performance Suspension Parts
      Coilovers Are Pricey - Why Would I Spend My Money For Them?
      When first glancing through the Performance Coilover Kits section of our website, you may be put off by some of the prices you see. After all, what are you buying other than a combo set of springs and shocks under some fancy name? Certainly, you ask yourself, can't you purchase springs and shocks separately and monetarily come out ahead?
      October 29, 2015
    • Performance Suspension Parts
      Body Lifts & Suspension Lifts From 2 to 10 Inches | What are my Lift Kit Choices?
      Has this happened to you? You catch a glimpse of a truck like yours in a parking lot or around town that, for some reason, you like better than your own. It seems to have a stance that's more rugged-looking and more suited to a 4x4 than yours does. Maybe you get a chance to stop and take a closer look immediately, or maybe it's days or weeks before you see the other truck again.
      October 27, 2015
    • Automotive Tools
      What Special Tools Are Available For Suspension Repair?
      Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
      October 09, 2015
    • Performance Suspension Parts
      Coil, Leaf, & Torsion Bar | Describing The 3 Different Kinds of Springs
      The springs in your vehicle probably aren't something you think about until there's a problem or you've decided to upgrade suspension parts in the interest of sportier handling. But what specifically do springs do? In short, they play a major role in the safe handling and ride comfort of your vehicle. Not only do they keep a vehicle at a designated standing height, they provide recoil necessary to bounce back after suspension components move up and down over uneven road surfaces. By themselves, springs will continue to bounce up and down for a long time unless a motion damper such as a shock absorber is present to keep things stable. Springs can be soft and extremely bouncy, or they can be stiffer and less bounce-prone.
      October 03, 2015
    • Performance Suspension Parts
      How Do Shock Absorbers Work?
      Shock absorbers (also known as "shocks") are the suspension components which slow, then stop, the up-and-down bouncing movement of your vehicle's springs through a process known as dampening. Without shocks to calm things down, springs will continue to extend and release energy they absorb from bumps in the road at an uncontrolled rate - bouncing for a long time until their kinetic energy finally dissipates. Needless to say, this would produce an extremely bouncy ride that would be hard to control over uneven road surfaces.
      October 02, 2015
    • Performance Transmission Parts
      Suspension Enhancements Will Raise The Rear Of Your Tow Vehicle
      If you are using your "daily driver" car or truck for occasional towing duty, you are looking for that ideal sweet spot where the weekday commute is comfortable and quiet, and the weekend trailering feels solid and secure. In other words, you don't want to vehicle to feel too "stiff" during the week, nor do you want it to ride "soft" when pulling a trailer.
      April 21, 2015
    • Wheels & Rims
      Stanced Wheels, Demon Camber | How Do I Get That Look?
      Stanced. Demon camber. You may know it as oni-camber. You've seen the look, and whether you like it or not is totally beside the point. The great thing about this stanced look is that it gets your attention. From the interviews we've read with owners and drivers of these machines, that is exactly what they are after. They've said that it's all about being noticed.
      March 18, 2015
    • Performance Suspension Parts
      Stock vs Performance Suspension
      Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
      September 17, 2013
    • Performance Suspension Parts
      Shocks Versus Struts: The Big Answers Revealed!
      Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
      September 10, 2013
    • Replacement Suspension Parts
      How to Inspect Your Suspension System
      The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most specialists recommend inspecting suspension system after every 6,500-7,500 miles or when there are any signs of its breakage.
      May 24, 2013
    • Performance Suspension Parts
      How Low Can You Go?
      Lowering is high on the list of many people who want to improve the appearance of their car. If you want to lower your car with the coil springs, then replacing them with lowering springs is the way to go. But what if you want to lower your car and also make it handle better? If that’s your goal then consider coil-over shocks.
      June 01, 2012

    Popular Products

    1986 Mazda RX-7 Performance Suspension Reviews

    Average rating:  5  5 - 10 reviews
    4.8 of 5
    Good Product
    I needed new shocks for my car so I bought QA1 28 series shock absorber. Durable construction, great looks and perfect fit. My car now handles much better without any sacrifice to ride quality.
    JPosted by John (Troy, MI) / March 31, 2016
    Was this review helpful for you? Yes
    View More
    Related 1986 Mazda RX-7 Pages
    1986 Mazda RX-7 Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.