Product Details

Oldsmobile Ninety-Eight 1972, Transpak Shift Improver Kit by B&M®. Includes: Gaskets, Drill Bits, Seals, Retaining Ring, Brass Plug, and Shift Valve. Most stock automatic transmissions won’t downshift into low gear above 15 MPH, and automatically upshift at a predetermined speed no matter what gear you’re in. With the TransPak, you can downshift at any speed, and you can hold the transmission in first gear to any speed you want! A TransPak will allow you the control to do everything from rev-out a modified engine for maximum performance, to hold a tow vehicle in low gear while descending a grade.

Specifications

Automotive Item Grade: High Performance

Gasket Included: Yes

Instructions Included: Yes

Manual Control: Partial

Includes

Gaskets
Drill Bits
Seals
Retaining Ring
Brass Plug
and Shift Valve

Features

Recalibrate your automatic transmission for optimum performance
Select the mode that best suits your application
Improves transmission life
Transmission removal not required

Most stock automatic transmissions won't downshift into low gear above 15 mph, and automatically upshift at a predetermined speed no matter what gear you're in. With the Transpak, you can downshift at any speed, and you can hold the transmission in first gear to any speed that you want! This is an asset when you've got a modified engine, and you want additional RPMs, or you're towing a trailer or driving heavy loads downhill. Stage 1 Heavy Duty - For street rods, normal passenger vehicles or other heavy duty use. Firmer shift feel but not harsh. Improves transmission performance and life dramatically without loss of comfort. Normal automatic operation when in "Drive". Stage 2 Hi-Performance Street - For full performance street use. Essentially the same as Heavy Duty mode except shift is much quicker. Retain full automatic features and standard shift points with selector in "Drive".

B&M® specializes in performance automatic transmissions, torque converters, SFI-approved flexplates, legendary automatic shifters, precision manual shifters, and many other transmission products, including cast deep aluminum transmission pans, transmission coolers, and automatic transmission fluids. B&M Racing and Performance has been at the vanguard of the growing automotive aftermarket since the early 1950s. Racers themselves, B&M’s founders identified the needs of local racers and street performance enthusiasts and developed products to fill those needs. As the industry grew, so did B&M. And as racers went faster, B&M developed products to help them break the records they just set.

Brand:

B&M

Part Number:

30228 20228

Warranty

Lifetime Limited Warranty applies to all B&M shifters, differential covers and cast aluminum pans.

One-Year Limited Warranty applies to B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products).

90-Day Limited Warranty applies to B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids).

B&M Racing & Performance (“B&M”) extends the following limited warranty to the original purchaser of its shifters, pans, coolers, transmissions, components and accessories (hereafter “products”).

B&M warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear (bushings, springs, etc.), cosmetic issues such as coatings and material discoloration, or any product that was installed on a racing vehicle (excluding shifters), installed contrary to B&M instructions, or altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or negligent act.

The warranty set forth herein for all B&M shifters, differential covers and cast aluminum pans extends for a period of the life of the original vehicle the product was installed on. The warranty set forth herein for B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products) extends for a period of one year from the date of original purchase and the original vehicle it was installed on. The warranty set forth herein for B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids) extends for a period of 90 days from the date of original purchase and the original vehicle it was installed on.

B&M’s liability is expressly limited to the replacement of the product or refund of the purchase price as described herein. B&M shall have no liability for the cost of installation or removal of the defective product, the cost of labor or any additional parts required to complete the installation of the replacement product. In no event shall B&M be liable for any direct, indirect, special, incidental and/or consequential losses or damages, including but not limited to interruption of business or loss of business or loss of profit or damage to related components resulting from the use of or inability to use the product, or any breach of warranty or any defect in the product, even if B&M shall have been advised of the possibility of such potential losses or damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You may also have other rights which may vary from state to state.

The warranties set forth herein are exclusive and unless otherwise required by applicable law, no other warranties are made by B&M or are authorized to be made with respect to the product.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

B&M® - Transpak Shift Improver Kit