Product Details
Dual Tandem Inline Master Cylinder Kit (B3360TA) by Strange®. This product is made of high-quality materials to serve you for years to come. Designed usig state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost.
Specifications
Cast aluminum body anodized for corrosion resistance |
Flange for firewall mounting 21/64" holes on 3.187" centers |
Provisions for side mounting 0.390" holes on 5 1/2" centers |
1/2"-20 brake line holes with brass inverted flare seats |
Bore Diameter: 1.032" (26.2128 mm) |
Includes
- Aluminum Master Cylinder With Plastic Reservoir
- 3/8"-24 x 4.200" long push-rod
- Push-rod locking grommet
- Dust boot to protect piston bore
- 1/2"-20 brass inverted flare adapters for 3/6" brake line
- 3/16" brake line nuts
- Does not include mounting plates or hardware
Features
- Perfect for drag racing or high-performance racing applications
- Designed and manufactured using innovative technologies
- Made in the USA
Application:
- Vehicles with front and rear manual disc brakes
- Normally used with single or two piston calipers in front and four piston in the rear
- This is assuming Drag Race brakes as factory calipers may require more fluid volume
- Brake pressure will be delivered equally out of both ports
- Use of an adjustable proportioning valve is highly recommended
Using All Wheel Disc brakes. Use 2 lb residual pressure valves if mounted at or below the level of the calipers. Using With Drum Brakes. Any line supplying drum brakes will require a 10 lb residual pressure valve. Recommendation: 5.5 to 1 pedal ratio.
With over five decades of manufacturing, design and engineering innovation, quality & unsurpassed customer service, Strange Engineering® will service the Drag Racing market with the same, passion, motivation and dedication that has defined them from humble beginnings. Strange Engineering has a rich racing heritage and a relentless need to innovate for all forms of Drag racing, including NHRA, and the NMRA and NMCA racers. Strange Engineering supplies OE rear housings for Ford's Cobra Jet Mustang program, GM's COPO and Mopar's Drag Pack program. Strange is a family company that has been manufacturing driveline and suspension components for many forms of racing and hi-performance vehicles since 1964. Strange Engineering is a market leader in the drag racing and hi-performance oval racing markets.