Vehicle Fitment
Make | Model | Year |
---|---|---|
Scion | xB | 2008-2015 |
Toyota | Camry | 2002-2011 |
Corolla | 2010 | |
Matrix | 2009-2011 | |
RAV4 | 2001-2005 | |
Solara | 2002-2008 |
Make | Model | Year |
---|---|---|
Scion | xB | 2008-2015 |
Toyota | Camry | 2002-2011 |
Corolla | 2010 | |
Matrix | 2009-2011 | |
RAV4 | 2001-2005 | |
Solara | 2002-2008 |
Single Mass Flywheel by LuK®. LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Overall Casting O.D.: 11.2567 inch |
Overall Casting O.D.: 285.92 mm |
Dowel Hole Pattern: 5 |
Bolt hole PCD clutch pres.plte: 10.6268 inch |
Bolt hole PCD clutch pres.plte: 269.92 mm |
Number of teeth, starter ring gear: 120 |
Ring Gear Chamfer Side: Transmission |
Flywheel Friction Surface Inner diameter: 5.8071 inch |
Flywheel Friction Surface Inner diameter: 147.5 mm |
Ring Gear Thickness: 0.4303 inch |
Ring Gear Thickness: 10.93 mm |
Centering diameter / dowel hole: 10.6268 inch |
Centering diameter / dowel hole: 269.92 mm |
Ring Gear Major Dia.: 12.0079 inch |
Ring Gear Major Dia.: 305 mm |
Flywheel Thickness [mm]: 1.1831 inch |
Flywheel Thickness [mm]: 30.05 mm |
Flange Thickness: 0.4516 inch |
Flange Thickness: 11.47 mm |
Crank To Friction Surface: 1.0071 inch |
Crank To Friction Surface: 25.58 mm |
I.D. for Pilot: 1.6433 inch |
I.D. for Pilot: 41.74 mm |
Bolt hole PCD crankshaft: 2.7094 inch |
Bolt hole PCD crankshaft: 68.82 mm |
Dowel hole diameter: 0.3114 inch |
Dowel hole diameter: 7.91 mm |
Bolt Hole Pattern: 15 |
Crank Hole Dia.: 0.5091 inch |
Crank Hole Dia.: 12.93 mm |
Ring Gear Chamfer Position @ 6:00 O´clock: Right |
Ring Gear Mounting O.D.: 10.9764 inch |
Ring Gear Mounting O.D.: 278.8 mm |
Flywheel friction surface outer diameter: 9.4606 inch |
Flywheel friction surface outer diameter: 240.3 mm |
Has Dowel Pins: with Dowel Pins |
Flywheel Cup Depth or Step Height: 0.0118 inch |
Flywheel Cup Depth or Step Height: 0.3 mm |
The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.
LuK® is a leading manufacturer of the systems and components for vehicle's powertrains. It was the first company in Europe which engineered the diaphragm spring clutch with a release system which is now installed in every third new car. At present the company manufactures dampers, components for clutch systems, transmissions, as well as products for tractors. The newest innovative product developments of LuK are the automation of manual transmissions, torque converters, and components for CVT transmissions that could handle more than 300 Nm of torque.