Vehicle Fitment
Make | Model | Year |
---|---|---|
BMW | 1-Series | 2008-2012 |
3-Series | 2006-2013 | |
5-Series | 2006-2010 | |
X3 | 2007-2010 | |
Z4 | 2006-2011 |
Make | Model | Year |
---|---|---|
BMW | 1-Series | 2008-2012 |
3-Series | 2006-2013 | |
5-Series | 2006-2010 | |
X3 | 2007-2010 | |
Z4 | 2006-2011 |
Dual Mass Flywheel by LuK®. LuK dual mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual mass flywheels cannot be resurfaced.
Number of teeth, starter ring gear: 115 |
Flywheel friction surface outer diameter: 9.4488 inch |
Flywheel friction surface outer diameter: 240 mm |
Crank Hole Dia.: 0.5039 inch |
Crank Hole Dia.: 12.8 mm |
Crank To Friction Surface: 1.685 inch |
Crank To Friction Surface: 42.8 mm |
Bolt Hole Pattern: 2 |
Ring Gear To Friction Surface: 2.2362 inch |
Ring Gear To Friction Surface: 56.8 mm |
Bolt hole PCD crankshaft: 2.8346 inch |
Bolt hole PCD crankshaft: 72 mm |
Ring Gear Major Dia.: 11.5 inch |
Ring Gear Major Dia.: 292.1 mm |
Bolt hole PCD clutch pres.plte: 10.2362 inch |
Bolt hole PCD clutch pres.plte: 260 mm |
Dowel Hole Pattern: 5 |
Centering diameter / dowel hole: 10.2362 inch |
Centering diameter / dowel hole: 260 mm |
Overall Casting O.D.: 11.5984 inch |
Overall Casting O.D.: 294.6 mm |
Ring Gear Number: L-08180-0G18-01 |
Cup depth, secondary flywheel: -0.3622 inch |
Cup depth, secondary flywheel: -9.2 mm |
Torque Capacity DMFW: 14.0157 inch |
Torque Capacity DMFW: 356 mm |
Ring Gear Mounting O.D.: 10.7421 inch |
Ring Gear Mounting O.D.: 272.85 mm |
Dowel hole diameter: 0.3937 inch |
Dowel hole diameter: 10 mm |
I.D. for Pilot: 0.9449 inch |
I.D. for Pilot: 24 mm |
Flywheel Friction Surface Inner diameter: 5.9055 inch |
Flywheel Friction Surface Inner diameter: 150 mm |
Flywheel Thickness [mm]: 3.0669 inch |
Flywheel Thickness [mm]: 77.9 mm |
Ring Gear Thickness: 0.3543 inch |
Ring Gear Thickness: 9 mm |
The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.
LuK® is a leading manufacturer of the systems and components for vehicle's powertrains. It was the first company in Europe which engineered the diaphragm spring clutch with a release system which is now installed in every third new car. At present the company manufactures dampers, components for clutch systems, transmissions, as well as products for tractors. The newest innovative product developments of LuK are the automation of manual transmissions, torque converters, and components for CVT transmissions that could handle more than 300 Nm of torque.