Vehicle Fitment
Make | Model | Year |
---|---|---|
BMW | 5-Series | 2000-2003 |
Z8 | 2000-2003 |
Make | Model | Year |
---|---|---|
BMW | 5-Series | 2000-2003 |
Z8 | 2000-2003 |
Dual Mass Flywheel by LuK®. LuK dual mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual mass flywheels cannot be resurfaced.
Crank To Friction Surface: 1.6142 inch |
Crank To Friction Surface: 41 mm |
Dowel Hole Pattern: 5 |
Ring Gear Thickness: 0.9252 inch |
Ring Gear Thickness: 23.5 mm |
Crank Hole Dia.: 0.5039 inch |
Crank Hole Dia.: 12.8 mm |
Ring Gear Mounting O.D.: 10.313 inch |
Ring Gear Mounting O.D.: 261.95 mm |
Dowel hole diameter: 0.3937 inch |
Dowel hole diameter: 10 mm |
I.D. for Pilot: 1.6535 inch |
I.D. for Pilot: 42 mm |
Bolt Hole Pattern: 2 |
Cup depth, secondary flywheel: -0.3622 inch |
Cup depth, secondary flywheel: -9.2 mm |
Ring Gear To Friction Surface: 1.4882 inch |
Ring Gear To Friction Surface: 37.8 mm |
Flywheel Thickness [mm]: 1.9764 inch |
Flywheel Thickness [mm]: 50.2 mm |
Bolt hole PCD crankshaft: 3.189 inch |
Bolt hole PCD crankshaft: 81 mm |
Number of teeth, starter ring gear: 130 |
Ring Gear Major Dia.: 13 inch |
Ring Gear Major Dia.: 330.2 mm |
Ring Gear Number: L-09180-0016-03 |
Overall Casting O.D.: 12.811 inch |
Overall Casting O.D.: 325.4 mm |
Bolt hole PCD clutch pres.plte: 10.2362 inch |
Bolt hole PCD clutch pres.plte: 260 mm |
Flywheel Friction Surface Inner diameter: 6.0236 inch |
Flywheel Friction Surface Inner diameter: 153 mm |
Flywheel friction surface outer diameter: 9.4882 inch |
Flywheel friction surface outer diameter: 241 mm |
Centering diameter / dowel hole: 10.2362 inch |
Centering diameter / dowel hole: 260 mm |
Torque Capacity DMFW: 21.2598 inch |
Torque Capacity DMFW: 540 mm |
The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.
LuK® is a leading manufacturer of the systems and components for vehicle's powertrains. It was the first company in Europe which engineered the diaphragm spring clutch with a release system which is now installed in every third new car. At present the company manufactures dampers, components for clutch systems, transmissions, as well as products for tractors. The newest innovative product developments of LuK are the automation of manual transmissions, torque converters, and components for CVT transmissions that could handle more than 300 Nm of torque.