Vehicle Fitment
This part is universal
Product Details
K 142 Series™ 6-piece 5/8" to 1-1/16" Wiper Arm Puller Set (K-142-6) by Kukko®. The one-piece bell-shaped. Shaped for optimal fit with all commonly used types of wiper arms. Mechanical pressure screw. Milled thread treated with special coating. Instructions on the cover. Secure storage in special foam.
Specifications
| Fork Opening: 5/8" - 1-1/16" |
| AOL Height: 1-3/16" - 2-1/2" |
| Jaw Width: 1/8 - 3/16" |
| Height: 5/8" - 1-7/8" |
| Spread: 2-3/8" |
| Depth: 2" |
| Quantity: 6 Pieces |
Includes
- 128-F-SW Universal whiper-arm puller
- 43-1 Universal 2-jaw puller with self-centering jaws
- 142-1 Universal wiper arm puller
- 142-2 Universal wiper arm puller
- 142-3 Universal wiper arm puller
- 142-4 Universal wiper arm puller
- Secure storage in special foam
Features
- Windshield wiper arms can be pulled without removing the bonnet
- The threaded spindles are guided by a movable bush, which allow the puller to be fitted to the edge of the arm at the start and in the middle at the end of the removal process
- Suitable for front and rear wipers with the washing fluid hose passing through the hub
- Special threads enable especially high pulling forces
- Solid, single-piece milled body for high strength
- No damage to wiper arm, shaft, etc
- No paint scratching
- No glass damage
How it works:
128-F-SW general-purpose wiper arm puller. 1. After removing the detachable cap, unscrew the stop nut to a point just before reaching the end, then attach and fix the gripper behind the wiper arm. 2. The gripper's counter hold is provided by the spanner flat (SW 15 mm). 3. Remove the wiper arm by tightening pressure spindle. 4. The supplied brass pressure piece is used for wiper arms with integrated windscreen washer jets. General-purpose puller with self-centering extractor hooks. 1. The part due to be removed (e.g. a gear or ball bearing) is gripped from the outside. Tightening of the pressure screw and the resulting pressure removes the part from the shaft. 2. With increasing spindle pressure, the pulling hooks clasp the part to be removed with an increasing amount of force. 3. The puller must be positioned centrally for centre shafts. Safety information: Do not use any electrical or pneumatic servo screwdrivers or hammer drills. Protective blanket required. Protective goggles required.
As a leading manufacturer of premium extractor tools, Kukko® is your perfect choice if you are looking for unparalleled quality and unbeatable reliability. The wide inventory of the company encompasses high-grade bearing extracting, wiper arm puller, and slide hammer sets as well as ball joint spreaders, hydraulic hub pullers, and tie and connecting rod joint pullers, etc. KUKKO uses premium-grade materials and applies leading-edge equipment and innovative manufacturing technologies to create for you the finest products ensuring years of dependable service.
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!