Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Ford | Mustang | 1974-1978 |
Product Details
Lower Tubular Shock Through Coil Control Arm Set (HEXCA12) by Helix®. Quantity: 2 per Pack. Helix™ Mustang II Tubular Lower Control Arms are the Grade "A" LCA that your hot rod needs for maximum performance! These control arms are a fully assembled ready-to-install left and right set that are a direct replacement for stock Mustang II LCA's with standard springs. Will fit on any Mustang II IFS and most stock or aftermarket Mustang II crossmembers without modification. Helix is proud to introduce it`s new line of CAD designed pre-assembled tubular control arms. These control arms allow for the use of coilovers or airbags. They will fit all air suspension systems. This is a complete set that includes the ball joints, bump stops, and polyurethane control arm bushings. Don`t upgrade your stock springs without Helix`s exclusive reinforced design!
Features
- Fully Assembled: Yes
- Application: Mustang II IFS
- Type: Tubular
- Tube Finish: Plain Painted Surface
- Cross Shaft Finish: Plain Steel
- All Steel Construction
- TIG Welded: Yes
- Screw In Ball Joint: Yes
- Grease Fitting Included: Yes
- Urethane Dust Boot: Yes
- Adjustable: No
- Tube O.D.: 1 in. (25 mm)
- Full .120 Wall Tubing
- Center to Center Length: 13" (33.0 cm)
- (Ball Joint Shaft Center to Cross Shaft Eye Center)
- Overall Width: 10.5" (26.7 cm)
- Overall Length: 14.75" (37.46 cm)
- Cross Shaft O.D.: 5/8" (16 mm)
- Quantity: Pair
- Left Side LCA: 1
- Right Side LCA: 1
- Hardware Included: Yes
- Castle Nut: 2
- Cotter Pin: 2
- Ball Joint/Nut Spacer Washers: 2x2
- Bushing/Sleeves: 4
- 7/16-14 x 7" Hex Bolt (Allen Head): 2
- 5/8-11 x 12" Hex Bolt: 2
- 5/8-11 Nylon Lock Nut: 2
- 5/8 Large Flat Plain Washer: 4
- Engineered to boost the performance of your vehicle
- Carefully designed utilizing the latest in technology
- Will provide exceptional service for years to come
The Helix™ lower control arm assembly features precision fabricated TIG welded construction and 1 inch O. D. aircraft quality tubular steel design with full. 120 wall for maximum strength and durability. This makes for a lighter weight yet much stronger LCA than the original stock arm that will endure a far higher stress load than the OEM design.
Complete left and right assembly includes 2 ea. 5/8-11 x 12" hex bolts (cross shaft), nylon locking nuts and large 5/8" washers, built-in polyurethane no-squeak bushings with steel sleeves, screw-in ball joint with urethane dust boot & grease fitting, 7/16-14 x 7" hex bolt (Allen head), castle nut with cotter pin, and castle nut/ball joint spacers (2 ea. x 2). This lower control arm assembly is stock design and ready to drop in immediately out of the box. For all of your suspension needs, Helix™ deliver the winning edge for maximum performance when it really counts!
When it comes to state-of-the-art steering, suspension, and braking parts for your vehicle, Helix® is considered to be one of the most respected manufacturers in the industry. Using the latest in technology, the company engineers high performance products that not just look good but also withstand the toughest environments. Helix research and development team designs and constantly improves products using advanced CAD software as well as checks the products for quality in its independent testing center. Consequently, Helix is one of the only aftermarket manufacturers in the industry to offer ADR certified products.
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!