Product Details
8000 Series Push-Lite Race Hose by Fragola Performance Systems®. FPS Series 8000 Push-Lite Race Hose is manufactured to the same rigorous standards as Series 3000 Stainless Race Hose. It is the perfect alternative when cost or weight is the main consideration. The Series 8000 Push-Lite Hose may be used in any number of automotive applications. If you are using fittings other than Series 8000 Push-Lite Hose Ends, be sure to measure the hose barb diameter to determine suitability. This hose is sized fractionally, but the suitability is at the sole determination of the end user. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost.
Notes
- For 8000 Series Push-Lite Hose Ends
- On bulk lengths of hose over 20 feet, Fragola Performance Systems reserves the right to ship plus or minus 15% in length in order to reduce the number of unsaleable pieces in stock
Specifications
Hose Color: Black |
Hose Material: Synthetic rubber |
Maximum Operating Pressure (psi): 250 |
Maximum Recommended Temperature: 300 degrees F |
Outer Material: Braided fiber |
PTFE Lined: No |
Quantity: 1 Piece |
Recommended Hose Ends: Fragola Series 8000 Push-Lite |
Features
- 250 psi maximum working pressure allows for most automotive water, oil and fuel systems
- Inner layer of synthetic PKR covered with a fiber braid reinforcement and wrapped with a weather-resistant textile cover
- Temperature range to 300° F
- Hose assemblies with Push-Lite Hose are over half the weight of the same stainless hose assembly
- For high heat or higher-pressure applications, we recommend our light-weight stainless band clamps
F.F. Screw Products started in 1973 as a job shop in a 1000 square foot building that was run as a part time operation with 1 employee. Within 4 years, it changed to a full time operation with 10 employees. In 1982 after years of doing job shop components for many large companies brand decided to start making their own product and F-K Bearings was started. At that time they were operating both F.F. Screw Products and F.K. bearing in two separate buildings that were approximately 36,000 square feet combined. In 1999 after talking to many of customers who kept inquiring why they didn’t manufacture fittings for the racing industry, Fragola Performance Systems® came about. Brand is now housed in a 80,000 square foot building with 35 employees, while sister company F.K. Bearings is across the street from brand with their own 80,000 square foot building with 55 employees.