Product Details
Go EFI 4 Power Adder 600HP Self-Tuning Fuel Injection System by FiTech®. The Go EFI Power Adder 600HP Kit is for the enthusiast that demands more from his system or is planning a future upgrade! This system is capable of 25lbs of Boost right out of the box and can be used in a blow thru turbo or blower application or on a single roots style supercharger. You can also run a single stage of Wet Nitrous and control your A/F as well as Ignition timing. Has all of the self tuning features you expect from the Go EFI systems with the extra PRO Features needed for higher output engines. Annular Swirl Discharge fuel distribution as well as Nitrous and Boost timing retard features make this a perfect choice for your Power Adder engine or your normally aspirated engine if you are considering future upgrades.
Notes
- With Use of a 2-Wire Distributor
- This is a Race Only product that is to be used solely for competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. Shipping Restriction: CA, NY, ME
Specifications
Calibration Module Included: Yes |
Distributor Included: No |
ECM Included: Yes |
EGR: No |
Fuel Pressure Regulator Included: Yes |
Fuel Pump Included: No |
Fuel Rails Included: No |
IAC Motor Included: Yes |
IAT Sensor Included: Yes |
Injectors Included: Yes |
Intake Manifold Included: No |
MAP Sensor Included: Yes |
Metering Style: Speed density (Map-N) and speed throttle (Alpha-N) |
Oxygen Sensor Included: Yes |
Power Adder Compatible: No |
Self Tuning: Yes |
Throttle Body Included: Yes |
Throttle Body Mounting Flange: 4-barrel square bore |
Timing Control Compatible: Yes |
TPS Sensor Included: Yes |
Transmission Controller Included: No |
User Tunable: Yes |
Venturi Quantity: 4 |
Wiring Harness Included: Yes |
Maximum Advertised Horsepower Increase: Up to 600 HP |
Style: Throttle Body |
Material: Cast Aluminum |
Fuel Type: E85 |
Throttle Body Finish: Satin Black |
Quantity: Kit |
Includes
- Die Cast Throttle Body
- Handheld Controller
- Windshield Mount
- (4) Hi-Flow 600 HP injectors
- Built-in pressure regulator
- 2.5 BAR Internal MAP Sensor
- Throttle Position Sensor
- Idle Air Control
- Coolant Temp Sensor
- Wide band O2 Sensor
- O2 Bung Kit
- -06AN Fuel Inlet Fitting
- Gasket Kit
Features
- Boost Ready Throttle Body
- Boost Ready ECU 2.5 Bar MAP sensor good for 21.7 PSI
- NITROUS control with a host of safety features and accessories for Nitrous tuning
- Nitrous and Boost specific target A/F target options
- Boost and Nitrous timing retard strategies
- 2 fan control (can set at separate temperatures)
- Air-conditioning idle speed input kick up
- Advanced hand Held Tuning Mode Enabled
- Pro Laptop Software, COMPLETE TUNING FOR PROFESSIONAL TUNERS
- (4) Hi-Flow 600 HP injectors
- Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes
- Self-tuning. After startup the ECU immediately takes over and provides your vehicle with an optimum tune
- Basic install can be done with just 4 wires and 2 sensors to install
- The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat
- Uses a Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts
- Throttle bodies have a completely universal base to fit any 4-bbl manifold
- Throttle Linkage suits most transmissions
- Choice of three fuel inlet connections
- All Go-EFI’s feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing
- Go-EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!! Check out our videos, you need to see it
- Ignition timing can be controlled and adjusted on the fly from your touch screen controller
- Air Fuel ratios can be optimized on the fly as you drive! Try that with your Carb
- Will work with CDI box but not required to control timing
- Built in Fuel pressure regulator. No extra regulator to mount on your fire wall
- Use of ignition timing control is optional and not required
- Ignition timing control does not learn, and requires synchronizing distributor to engine with a timing light
FiTech® is the leading manufacturer of technologically-advanced yet affordable electric fuel ignition systems for automotive applications. FiTech started with just a couple of EFI systems a few years ago, and now the company offers a wide range of fuel injection systems and components, such as electric fuel pumps, fuel filters, fuel delivery kits, etc. FiTech products are compatible with most engine types, including dual quad, nitrous and boosted ones. FiTech EFI systems and components are designed using the latest in the fuel injection engineering to deliver the performance you can rely on for years to come.