Product Details
Easy Street EFI Fuel Injection System by FiTech®. FiTech Fuel Injection is rounding out the street line with the all new Easy Street 600hp system. The street series includes the 150-400hp Go Street and the 200-800hp Mean Street, now we’re adding the 250-600hp Easy Street system! Pre-programmed with bolt-n-go technology for out of the box performance with minimal input required. Easy tach input, reads tach signal from COIL, HEI, CDI, and many other ignition brands (No timing control). For non boosted engines naturally aspirated applications only.
Notes
- This is a Race Only product that is to be used solely for competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. Shipping Restriction: CA, NY, ME.
Specifications
Calibration Module Included: Yes |
Distributor Included: No |
ECM Included: Yes |
EGR: No |
Fuel Pressure Regulator Included: Yes |
Fuel Pump Included: No |
Fuel Rails Included: No |
IAC Motor Included: Yes |
IAT Sensor Included: Yes |
Injectors Included: Yes |
Intake Manifold Included: No |
MAP Sensor Included: Yes |
Metering Style: Speed density (Map-N) and speed throttle (Alpha-N) |
Oxygen Sensor Included: Yes |
Power Adder Compatible: No |
Self Tuning: Yes |
Throttle Body Included: Yes |
Throttle Body Mounting Flange: 4-barrel square bore |
Timing Control Compatible: No |
TPS Sensor Included: Yes |
Transmission Controller Included: No |
User Tunable: Yes |
Venturi Quantity: 4 |
Wiring Harness Included: Yes |
Flow Rate: 80 Lb/Hr |
Diameter: 44.45 mm |
Maximum Advertised Horsepower Increase: 600 HP |
Style: Throttle Body |
Material: Cast Aluminum |
Fuel Type: E85 |
Throttle Body Finish: Gold |
Quantity: Kit |
Includes
- Classic Gold Die Cast Throttle body
- Windshield Mount
- (4) FiTech 80-LB flow matched injectors
- Wide band O2 Sensor
- -06AN Fuel Inlet Fittings
- 1 fan control adjustable from controller
Features
- Annular discharge
- Windshield Mount for control
- (4) 80lb flow matched injectors
- Extreme self learning for wide range of super-fast dial in connection
- Suitable for crate engines and performance engines
- Pre-programmed with bolt-n-go technology for out of the box performance with minimal input required
- Easy tach input, reads tach signal from COIL, HEI, CDI, and many other ignition brands (NO TIMING CONTROL)
- For non boosted engines-natural aspirated applications ONLY
- Wide band O2 sensor with mounting kit
- On board fuel pump diver with PWM
- Hand-held tunning module for performance tunning
- Compatible with E-85 gasoline
- All Go-EFI’s feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing
- Go-EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!! Check out our videos, you need to see it
- Air Fuel ratios can be optimized on the fly as you drive! Try that with your Carb
FiTech® is the leading manufacturer of technologically-advanced yet affordable electric fuel ignition systems for automotive applications. FiTech started with just a couple of EFI systems a few years ago, and now the company offers a wide range of fuel injection systems and components, such as electric fuel pumps, fuel filters, fuel delivery kits, etc. FiTech products are compatible with most engine types, including dual quad, nitrous and boosted ones. FiTech EFI systems and components are designed using the latest in the fuel injection engineering to deliver the performance you can rely on for years to come.