Name: Fabtech® - 4" x 5" Basic Front and Rear Suspension Lift Kit
Brand: Fabtech
SKU: mpn4478755497
Price: 2021.99 USD
Availability: OutOfStock

Vehicle Fitment

Make	Model	Year
Ford	F-150	2010-2013

Product Details

Basic Front and Rear Suspension Lift Kit with 4" Front and 5" Rear Lift Height by Fabtech®. Max Tire Size: 37"x12.5". This Basic Systems include steel coilover shock spacers that utilize the stock front coilover shocks for a factory like ride. This system uses proven IFS technology with extended length ductile iron steering knuckles and arched crossmembers for exceptional suspension ground clearance with a 1/4" thick differential skid plate, impact struts, heavy duty tie rods, and rear add-a-leafs.

Specifications

With Front Knuckles

Without Shocks

Max Tire Size: 37"x12.5"

Wheels and tires recommended parameters: 18"×9" with 5" Backspacing with minor trimming

Includes

(1) Shock Extension Upper Half A (Driver) (Part Number FT30527BK)
(1) Shock Extension Upper Half B (Driver) (Part Number FT30528BK)
(1) Shock Extension Lower (Driver) (Part Number FT30529BK)
(1) Shock Extension Lower (Passenger) (Part Number FT30530BK)
(4) Aluminum Shock Bushing (Part Number FT30533)
(1) Rear Shock Drop Mount (Driver) (Part Number FT30531BK)
(1) Rear Shock Drop Mount (Passenger) (Part Number FT30532BK)
(1) Shock Extension Upper Half A (Passenger) (Part Number FT30534BK)
(1) Shock Extension Upper Half B (Passenger) (Part Number FT30535BK)
(1) Skid Plate (Part Number FT30377BK)
(1) Diff Drop Bracket Rear (Part Number FT30585BK)
(1) Front Crossmember (Part Number FT30489BK)
(2) Diff Drop Bracket Upper (Part Number FT30491)
(1) Sway Bar Drop Bracket (Driver) (Part Number FT30492)
(1) Sway Bar Drop Bracket (Passenger) (Part Number FT30493)
(1) Diff Drop Bracket Center (Part Number FT30567)
(1) Rear Crossmember (Part Number FT30512BK)
(1) Hardware Kit (Part Number FT30566)
(1) Alignment Cam Half Kit (Part Number FT295)
(1) Hardware Subassembly (Part Number FT30526)
(1) Hardware Kit (Part Number FT30525)
(4) Ubolt Sq 9/16-18X10.50X3.00 (Part Number FT737U)
(2) Block 5" W/ 2 Pin (Part Number FTBK52)
(1) Spindle Machined (Driver) (Part Number FTS30494D)
(1) Spindle Machined (Passenger) (Part Number FTS30494P)

Features

Designed to provide a smooth and comfortable ride
Built to enhance your off-road capabilities
Made from road-touch materials to survive the test of time
Perfectly installed for the first time

Utilizing over 20 years of off-road racing experience in suspension design, Fabtech has done its best to provide you with top of the line lift kits for your vehicle. This product is specially designed to lift your four-wheeler to increase its off-road capabilities, while maintaining a comfortable and smooth ride. It's also an ideal solution for most wheel upgrades when larger than stock wheels are the goal. Each kit is made using the latest in design and technology equipment like laser cutters, robotic welders, forming equipment, and machining centers to ensure superior quality and strength.

Located in Chino, California Fabtech® headquarters spans across five acres. The custom building was constructed to Fabtech's specification for in house development, manufacturing, distribution and administration. The 100,000 square foot facility is divided into designated departments that can operate as a single unit or collectively as a group. This allows Fabtech to function 24 hours a day as needed without compromising security, capacity or quality of the operations. Fabtech's development capabilities are second to none with over 25 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with Fabtech's seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for brand's designs that continue to lead the market.

Brand:

Fabtech

Part Number:

K2186

UPC:

674866087354

Alternate MPN:

K2186

Installation

Fabtech® - Basic Front and Rear Suspension Lift Kit Installation Instructions

Warranty

Fabtech provides a Limited Lifetime Warranty to the original retail purchaser who owns the vehicle, on which the product was originally installed, for defects in workmanship and materials.

The Limited Lifetime Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, tie rod ends, limiting straps, cross shafts, heim joints and driveshafts. These parts are subject to wear and are not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship.

Dirt Logic and Performance Coilover take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks are covered under Fabtech Limited Lifetime Warranty.

Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech’s instructions. Alterations to the finish of the parts including but not limited to painting, powder coating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping, which is considered normal and is not covered under warranty.

Fabtech products are not designed nor intended to be installed on vehicles used in race applications or for racing purposes or for similar activities. (A "RACE" is defined as any contest between two or more vehicles, or any contest of one or more vehicle against the clock, whether or not such contest is for a prize). This warranty does not include coverage for police or taxi vehicles, race vehicles, or vehicles used for government or commercial purposes. Also excluded from this warranty are sales outside of the United States of America.

Installation of most suspension products will raise the center of gravity of the vehicle and will cause the vehicle to handle differently than stock. It may increase the vehicle’s susceptibility to a rollover, on road and off road, at all speeds. Extreme care should be taken to operate the vehicle safely at all times to prevent rollover or loss of control resulting in serious injury or death. Fabtech front end Desert Guards may impair the deployment or operation of vehicles equipped with supplemental restraining systems/air bag systems and should not be installed if the vehicle is equipped as so.

Fabtech makes every effort to ensure suspension product compatibility with all vehicles, but due to unknown auto manufacturer’s production changes and/or inconstancies by the auto manufacturer, Fabtech cannot be responsible for 100% compatibility, including the fitment of tire and wheel sizes listed. The Tire and Wheel sizes listed are only a guideline for street driving with noted fender trimming. Fabtech is not responsible for damages to the vehicle’s body or tires. Fabtech is not responsible for premature wear of factory components due to the installation of oversized tires and wheels.

Fabtech’s obligation under this warranty is limited to the repair or replacement, at Fabtech option, of the defective product only. All costs of removal, installation or re-installation, incidental or consequential damages are expressly excluded from this warranty. Fabtech is not responsible for damages and/or warranty of other vehicle parts related or non related to the installed Fabtech product. This warranty is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has been subject to accident, negligence, alteration, abuse or misuse as determined by Fabtech.

Fabtech suspension components must be installed as a complete system including shocks. All warranties will become void if Fabtech parts are combined and/or substituted with other aftermarket suspension products. Combination and/or substitution of other aftermarket suspension parts may cause premature wear and/or product failure resulting in an accident causing injury or death. Fabtech does not warrant products not manufactured by Fabtech.

Depending on the condition of the factory suspension components retained after the installation of a Fabtech suspension not all vehicles may have the same ride stance front to rear as described. The blue color of suspension components shown in all Fabtech photographs are for display purposes only. Majority of all Fabtech components will be black specifically where noted with part numbers ending in BK.

Installation of Fabtech product may void the vehicles factory warranty; it is the consumer’s responsibility to check with their local vehicle’s dealer for warranty disposition before the installation of the product. Some state laws may prohibit modification of suspension to a vehicle in whole or in part. It is the responsibility of the installer and consumer to consult local laws prior to the installation of any Fabtech suspension product to comply with such written laws.

It is the responsibility of the distributor and/or the retailer to review all warranties and warnings of Fabtech products with the consumer prior to purchase.

Fabtech reserves the right to super cede, discontinue, change the design, finish, part number and/or application of parts when deemed necessary without written notice.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Fabtech® - 4" x 5" Basic Front and Rear Suspension Lift Kit

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!