Vehicle Fitment

Make	Model	Year
Cadillac	Escalade	2002-2003
Chevy	CK Pickup	1993-2000
	Express	1996-2009
	G-Series	1993-1996
	P-Series	1993-1999
	Silverado 1500	2001-2003, 2005
	Silverado 2500	1999-2006
	Silverado 3500	2001-2006
	Suburban	1993-2007
	Tahoe	1995-1999
GMC	CK Pickup	1993-2000
	G-Series	1993-1996
	P-Series	1993-1999
	Savana	1996-2009
	Sierra 1500	2001-2006
	Sierra 2500	1999-2006
	Sierra 3500	2001-2006
	Suburban	1993-1999
	Yukon	1993-1998, 2000-2007
	Yukon Denali	1999, 2001-2003

Product Details

Traveler Torque Converter by B&M®. Includes: Torque Converter, New needle bearing and thrust washer. Stall Speed: 2000. B&M’s Traveler converters are designed for use in heavy duty applications such as motor homes and tow vehicles. The slightly higher stall speed helps to get the heavy vehicle moving, without sacrificing normal highway operation. The minor 300 RPM increase on stall speed is also helpful in keeping transmission oil temperature lower, when compared to normal high stall converters. The Traveler is stronger than a stock converter as well, through the use of new pump drive tubes, needle bearings where equipped on the original model, and new thrust washers. These units are manufactured to B&M’s specifications for long, trouble-free operation.

Specifications

Automotive Item Grade: High Performance

Bolt Circle Diameter (in): 11.5

Furnace Brazed: Yes

Indicator Light: No

Material: Steel

Stall Torque Ratio: 1900 to 2100 RPM stall

Includes

Torque Converter
New needle bearing and thrust washer

Features

Furnace brazed impeller and turbine fins – (not spot brazed)
New precision steel pump drive tube
Pressure tested
Heavy duty needle thrust bearings between stator and turbine
New thrust washer between turbine and cover
Fully balanced

The reason for considering B&M torque converters boils down to performance. Higher stall speed is the key. A higher stall converter allows the vehicle to accelerate better from a dead stop and may provide tire-smoking performance. B&M offers a wide range of performance torque converters to fit almost everybody's needs. From the Tork Master, to the Nitrous Holeshot for street applications to the Quick 60 Race converters for racing, B&M has the right converter for your vehicle. All B&M converters are precision engineered, spin balanced and pressure tested.

B&M® specializes in performance automatic transmissions, torque converters, SFI-approved flexplates, legendary automatic shifters, precision manual shifters, and many other transmission products, including cast deep aluminum transmission pans, transmission coolers, and automatic transmission fluids. B&M Racing and Performance has been at the vanguard of the growing automotive aftermarket since the early 1950s. Racers themselves, B&M’s founders identified the needs of local racers and street performance enthusiasts and developed products to fill those needs. As the industry grew, so did B&M. And as racers went faster, B&M developed products to help them break the records they just set.

Brand:

B&M

Part Number:

70431

UPC:

019695704315

Warranty

Lifetime Limited Warranty applies to all B&M shifters, differential covers and cast aluminum pans.

One-Year Limited Warranty applies to B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products).

90-Day Limited Warranty applies to B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids).

B&M Racing & Performance (“B&M”) extends the following limited warranty to the original purchaser of its shifters, pans, coolers, transmissions, components and accessories (hereafter “products”).

B&M warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear (bushings, springs, etc.), cosmetic issues such as coatings and material discoloration, or any product that was installed on a racing vehicle (excluding shifters), installed contrary to B&M instructions, or altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or negligent act.

The warranty set forth herein for all B&M shifters, differential covers and cast aluminum pans extends for a period of the life of the original vehicle the product was installed on. The warranty set forth herein for B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products) extends for a period of one year from the date of original purchase and the original vehicle it was installed on. The warranty set forth herein for B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids) extends for a period of 90 days from the date of original purchase and the original vehicle it was installed on.

B&M’s liability is expressly limited to the replacement of the product or refund of the purchase price as described herein. B&M shall have no liability for the cost of installation or removal of the defective product, the cost of labor or any additional parts required to complete the installation of the replacement product. In no event shall B&M be liable for any direct, indirect, special, incidental and/or consequential losses or damages, including but not limited to interruption of business or loss of business or loss of profit or damage to related components resulting from the use of or inability to use the product, or any breach of warranty or any defect in the product, even if B&M shall have been advised of the possibility of such potential losses or damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You may also have other rights which may vary from state to state.

The warranties set forth herein are exclusive and unless otherwise required by applicable law, no other warranties are made by B&M or are authorized to be made with respect to the product.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

B&M® 70431 - Traveler Torque Converter

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!