In-Channel Ventvisor™ Smoke Front and Rear Window Deflectors by AVS®. 4 Pieces. If you want all the benefits of Ventvisors but with a sleeker, lower profile, these In-Channel Ventvisors are for you. They offer the same protection against the elements while keeping the fresh air flowing, but with an aerodynamic design that will blend in beautifully with your vehicle. Made of tinted, reinforced acrylic, the In-Channel Ventvisors are UV and scratch resistant, car wash safe, and install in minutes with the included 3M™ double-sided tape.
- Installs inside the window channel for a low profile, aerodynamic appearance
- Easy to install, no drilling required
- Allows fresh air in while keeping, rain, wind, and drafts out
- Fresh air circulation removes stale air and odors
- Reduces wind noise, keeping interior quieter
- Reduces mirror fogging
- Shields your eyes from the sun for safer driving
- Allows you to crack the windows when parked in the sun, to let heat escape and keep interior cooler
- Custom designed for each vehicle, for a precision fit
- Made of tough reinforced acrylic that is UV and scratch resistant
- Stylish smoke finish
- Car wash safe
- Comes with detailed installation instructions
- Backed by a limited lifetime warranty
- Proudly made in the USA
- 2 Pieces of Front Window Deflectors
- 2 Pieces of Rear Window Deflectors
Some drivers are content to let the climate control do all the work and drive with the windows up all the time, while others crave fresh air and like the windows down as much as possible. If you’re in the latter group then you know how difficult it can be to get your fresh air fix when it’s raining or when driving at speed; if you lower the windows you’ll get soaked or grow deaf from wind noise. For fresh air junkies the answer to your dilemma is a set of In-Channel Ventvisor Window Deflectors. Once installed on your vehicle, In-Channel Ventvisors will let you keep your windows open enough for fresh air circulation without getting wet, and they’ll significantly reduce wind noise so you can drive at speed with the windows open. In-Channel Ventvisors will also keep your interior cooler during the hot summer months by allowing you to crack your windows when parked in the sun. The trapped heat will be able to escape and potential thieves won’t be able to tell your windows are slightly down.
In-Channel Ventvisors are designed to blend beautifully with the contours of your vehicle. Unlike regular Ventvisors they install inside the window channel, for a sleeker, low profile look. They’re made of rugged reinforced acrylic that is UV and scratch resistant, with an attractive smoke finish that will help shield the sun from your eyes and be a stylish enhancement to any vehicle. AVS uses a higher grade acrylic material than most other manufacturers, which means In-Channel Ventvisors will hold their smoke finish longer, and are just the right thickness to be strong yet flexible for a perfect fit.
In-Channel Ventvisors install quickly and easily with 3M acrylic foam tape, and no drilling is required. This tape is so effective it’s used by the automobile manufacturers to attach trim parts at the factory. Because no drilling is required, there’s no need to worry about rust forming at a hole. The foam core allows the tape to expand and contract with temperature changes and conform to surface irregularities. Installation is not only simpler; there are no unsightly fasteners to deal with. Just clean the surface according to the included instructions, then remove the backing from the tape and press the In-Channel Ventvisor into place.
You can run your car or truck through the car wash with In-Channel Ventvisors installed; however automatic “brush-style” car washes should be avoided. They come with everything required for installation, including detailed instructions, and they’re covered by a limited lifetime warranty against defects in materials and workmanship. The warranty applies to the original purchaser as long as he or she owns the vehicle on which the product is installed.
AVS® is the innovator of the auto Ventshade, first produced in 1935 to mount above a car window to keep rain out and let fresh air in. In testimony to its effectiveness, the Ventshade is still manufactured by AVS today, albeit in a much more modern form. The company also manufactures a wide range of other Ventvisor/side window deflectors along with hood/windshield protectors and vehicle styling/protective accessories. In 1998 AVS was acquired by prominent truck accessory manufacturer Lund International, and today is one of that company’s leading brands. AVS products are precision engineered and crafted from the finest materials right here in the USA.