2014 Toyota Sequoia OE Integration Interfaces
-
PAC®ControlPRO2 Analog/CAN-Bus Steering Wheel Control InterfaceToyota Sequoia 2014, ControlPRO2 Analog/CAN-Bus Steering Wheel Control Interface by PAC®. With Web and APP Supported Installation. The ControlPRO SWI-CP2 retains the built-in steering wheel controls in vehicles when replacing the...Easy to Use and Time SavingWorks on Analog (resistive) and Data SWC Systems$79.00 - Axxess®Radio Replacement Interface with Steering Wheel ControlsToyota Sequoia 2014, Radio Replacement Interface with Steering Wheel Controls by Axxess®. Each Interface auto detects the vehicle it is in and automatically configures itself to work perfectly with that vehicle. Then just plug in the...Retains audio controls on the steering wheelProvides NAV outputs (reverse)$204.99
- PAC®ControlPRO5 Analog/CAN-Bus Steering Wheel Control InterfaceToyota Sequoia 2014, ControlPRO5 Analog/CAN-Bus Steering Wheel Control Interface by PAC®. With Smart Phone/PC App Programmability. The SWI-CP5 interface allows the retention of steering wheel controls (SWC), rear seat controls (RSC) and...Configure using the Web Application, Android Application, Apple Application, PC Application, USB flash drive or manuallyCompatible in vehicles equipped with LAN, LIN, CAN, Class II, Analog or Serial Data SWC$110.52
- PAC®AmpPRO 4 Amplifier Integration InterfaceToyota Sequoia 2014, AmpPRO 4 Amplifier Integration Interface by PAC®. For Vehicles with Premium Amplified Sound Systems. Today's modern vehicle audio systems are becoming increasingly more sophisticated and complex. PAC engineered...Can be used to upgrade the entire sound system or just part of it thanks to retention of the original amplifierEnables the addition of a subwoofer system to the original sound system$315.00
- PAC®RadioPRO Advanced InterfaceToyota Sequoia 2014, RadioPRO Advanced Interface by PAC®. RadioPRO ADVANCED Interface for Toyota, Lexus, and Scion vehicles with SWC, with or without amplified audio systems. TY1A-RS enables installation of an aftermarket radio while...Multiple vehicle connectors and necessary firmware offering the broadest range of vehicle coverageReal-time and programmable speaker fade function$159.96
- PAC®RadioPRO3 Radio Replacement InterfaceToyota Sequoia 2014, RadioPRO3 Radio Replacement Interface by PAC®. The RP3.2-TY11 radio replacement interface is your plug-n-play solution to upgrade your factory radio with an aftermarket radio in select 2003 - 2017 Toyota vehicles....Direct USB updatability10 Amp accessory output$79.00
- Beat-Sonic®Front Camera InterfaceToyota Sequoia 2014, Front Camera Interface by Beat-Sonic®. Ability to switch between front camera and current display screen (Navigation/DVD/Rear Camera). Focused on innovation and quality, Beat-Sonic is sure to enhance your driving...Ability to switch between front camera, rear camera and factory Toyota screenIdeal for avoiding front obstacles especially for vehicles with front spoilers and/or lowered suspension$165.00
- PAC®Infrared Repeater InterfaceUniversal Infrared Repeater Interface by PAC®. Control remote mounted / hidden video players and stereos using the units IR remote. Extends the infrared signal from any wireless remote to control products that are hidden or not within...Extends the range of any IR remote control (17ft. cable)Easy two wire hook up$37.27
- PAC®Latching Phantom Ignition ModuleUniversal Latching Phantom Ignition Module by PAC®. Latching Phantom Ignition Module for CAN-BUS vehicles, and vehicles with stop-start technology. IGN-3 detects when the engine is running, and provides an accessory power output wire...Detects when the engine is running and provides switched accessory power wireSelectable Power-off-delay of 10 seconds or 140 seconds$30.64
- Crux®Steering Wheel Control Interface ModuleUniversal Steering Wheel Control Interface Module by Crux®. The CRUX SWR-100 is a pre-programmed universal steering wheel control retention Interface. This module is compatible with most vehicles out in the market that use CAN, LAN,...Retains Steering Wheel Controls via built-in, pre-programmed interfaceAuto detects CAN, LAN, & iBUS Protocols$61.95
2014 Toyota Sequoia OE Integration Interfaces Reviews
1 review
You Have to Solder Wires.
Beat-Sonic® - Front Camera InterfacePosted by Anthony (Quincy, MA) / May 23, 20182014 Toyota Tacoma
2014 Toyota Sequoia Models
Related Searches