1988 Mazda B-Series Emission Control

Change Vehicle
Show items:
Sort by:
Select Engine
  • Select Engine
  • 2.2L
  • 2.6L
  • Oxygen Sensors
  • PCV & Breathers
  • EGR Valves
  • Catalytic Converters
    • (0 reviews)
      # 21094998
      Mazda B-Series 1988, Oxygen Sensor by Denso®. Position: Upstream. Denso's light duty oxygen sensor started to appear on vehicles with the development of fuel injection systems. The basic job of the sensor is to monitor the air fuel...
      Corrosion-resistant stainless steel constructionPTFE filter blocks efficiency-robbing contaminants
      $22.98 - $29.25
    • (0 reviews)
      # 22141579
      Mazda B-Series 1988, Oxygen Sensor by NTK®. Position: Upstream. Thimble type sensors feature a ceramic element that projects into the exhaust system and becomes electrically conductive at high temperature. The sensor element then sends...
      Increases vehicle fuel economy and engine performance while decreasing vehicle exhaust emissionsDirect replacement
      $22.48 - $28.20
    • (0 reviews)
      # mpn3368458736
      Mazda B-Series 2.6L 1988, Oxygen Sensor by Spectra Premium®. Position: Upstream. To ensure your vehicle has optimal performance and fuel economy while producing minimal emissions replace a defective O2 sensor with one backed by the...
      Increase vehicle fuel economy and engine performance while decreasing vehicle exhaust emissions100% performance tested to meet vehicle requirements
      $21.60
    • (0 reviews)
      # mpn472986
      Mazda B-Series 1988, Universal Fit Oxygen Sensor by Denso®. Position: Upstream. Denso's light duty oxygen sensor started to appear on vehicles with the development of fuel injection systems. The basic job of the sensor is to monitor the...
      Corrosion-resistant stainless steel constructionPTFE filter blocks efficiency-robbing contaminants
      $11.15
    • (0 reviews)
      # 405258299
      Mazda B-Series 1988, Premium Oxygen Sensor by Bosch®. Position: Upstream. A worn-out oxygen sensor can cause engine performance problems and shorten the life of the catalytic converter. Tune-up your vehicle with an Oxygen Sensor from...
      Up to 15 % savings in fuel costsReduced CO2 emissions
      $22.56 - $34.23
    • (0 reviews)
      # mpn937504
      Mazda B-Series 1988, Universal Fit Oxygen Sensor by Bosch®. Position: Upstream. Universal Oxygen Sensors with OE SmartLink are quick and easy to install. Each sensor has enough length of sensor wire to allow maximum replacement of worn...
      Patented SmartLink™ connector systemNo special tools required for installation
      $14.36
    • (0 reviews)
      # 45221490
      Mazda B-Series 1988, Intermotor™ PCV Valve by Standard®. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products, competitive prices and the highest reputation for...
      OE quality parts from top original equipment and aftermarket manufacturersThe finest quality at a great price
      $4.71 - $5.31
    • (0 reviews)
      # mpn4478645582
      Mazda B-Series 2.2L 1988, Professional™ PCV Valve by ACDelco®. Designed utilizing the latest technology, this product by ACDelco features premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle,...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $6.44
    • (0 reviews)
      # 83774043
      Mazda B-Series 1988, PCV Valve by FRAM®. The Positive Crankcase Ventilation (PCV) system prevents the release of harmful emissions, helps keep engine oil clean and prevents excessive crankcase pressure, which can cause oil leaks....
      Essential component of the PCV systemRegulates flow of crankcase vapors into the engine
      $1.71 - $4.23
    • (0 reviews)
      # 689644309
      Mazda B-Series 1988, PCV Valve by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to import vehicles in the 1950’s,...
      OE quality products from top original equipmentTop quality materials
      $4.22 - $5.13
    • (0 reviews)
      # mpn1946971
      Mazda B-Series 2.2L 1988, PCV Valve by Novo®. Is your CHECK ENGINE light on? Has your vehicle failed a state emissions test? Your vehicle's emissions control system is in need of repair, but before you waste your time and gas running...
      OE quality parts from top original equipment and aftermarket manufacturersThe finest quality at a great price
      $5.21
    • (0 reviews)
      # 45221484
      Mazda B-Series 1988, Intermotor™ EGR Valve by Standard®. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products, competitive prices and the highest reputation for...
      OE quality parts from top original equipment and aftermarket manufacturersHeavy-duty stepper motor and stainless-steel valve components ensure durability
      $257.23 - $284.33
    • (0 reviews)
      # 88069911
      Mazda B-Series 1988, CalCat™ Catalytic Converter by Walker®. Emissions: CARB compliant. Converter Configuration: Universal Fit. Catalytic Converter Body Shape: Standard Oval. With 1 Inlet. Without Air Tube. Without O2 Sensor Port....
      Constructed to meet your vehicle’s specific emissions requirementsFeatures stainless steel body with aluminized steel pipe and heat shields
      $62.72 - $98.64
    • (0 reviews)
      # 88069915
      Mazda B-Series 1988, Ultra™ Catalytic Converter by Walker®. Emissions: EPA compliant. Converter Configuration: Universal Fit. Catalytic Converter Body Shape: Small Oval. With 1 Inlet. Without Air Tube. Without O2 Sensor Port....
      Constructed to meet your vehicle’s specific emissions requirementsFeatures stainless steel body with aluminized steel pipe and heat shields
      $50.33
    • (0 reviews)
      # 286271772
      Mazda B-Series 1988, Standard Catalytic Converter by Eastern®. Emissions: EPA compliant. Converter Configuration: Direct Fit. Without O2 Sensor Ports. If you need to replace your failed or damaged catalytic converter, this product is...
      Direct OEM replacementConverts harmful engine emissions to less dangerous gases and water vapor
      $99.14 - $195.28
    • (0 reviews)
      # 100291353
      Mazda B-Series 1988, Catalytic Converter by Eastern®. Converter Configuration: Universal Fit. Catalytic Converter Body Shape: Oval. Whether your catalytic converter is damaged by road debris or failed due to an engine problem, you...
      Converts harmful engine emissions to less dangerous gases and water vaporAdvanced design for maximum engine output
      $32.63 - $87.56
    • (0 reviews)
      # 80143448
      Mazda B-Series 1988, Catalytic Converter and Pipe Assembly by AP Exhaust®. Emissions: EPA compliant. Converter Configuration: Direct Fit. Position: Rear. Without Air Tube. Without O2 Sensor Port. Catalytic Converter Overall Length:...
      5-year/50,000-mile warranty on converter body25,000-mile warranty on emissions
      $123.35
    • (0 reviews)
      # 81398445
      Mazda B-Series 1988, Standard Duty Catalytic Converter by AP Exhaust®. Emissions: EPA compliant. Converter Configuration: Universal Fit. Catalytic Converter Body Shape: Oval. Without O2 Sensor Port. Catalytic Converter Overall Length:...
      A multitude of Universal converter bodies provided for maximum coverageProvides professional installer with immediate installation options
      $51.78 - $53.81
    • (0 reviews)
      # 98836665
      Mazda B-Series 1988, Catalytic Converter by Bosal®. Emissions: EPA compliant. Converter Configuration: Direct Fit. With Pipe. Without Air Tube. Without Thermo Sensor. If you’re in need of a replacement catalytic converter, you can’t...
      Constructed to meet your vehicle’s specific emissions requirementsRadial flow concept allows for an even distribution of the gas flow in the converter for the optimal conversion of harmful gases
      $107.58
    • (0 reviews)
      # 86071883
      Mazda B-Series 1988, Catalytic Converter by DEC®. Converter Configuration: Direct Fit. Pick out a catalytic converter by DEC and get your emissions back into check without worrying to fail again. These catalytic converters are made from...
      Direct fitMade from a heavy duty stainless steel outer shell
      $178.50 - $284.17
    • (0 reviews)
      # 545960063
      Mazda B-Series 1988, Catalytic Converter by Davico®. Emissions: EPA compliant. Converter Configuration: Direct Fit. This direct-fit catalytic converter by Davico will be a great solution to replace your failed or damaged catalytic...
      Helps your vehicle emit harmless gasesDirect OEM replacement
      $73.29 - $214.76
    • (0 reviews)
      # 950053175
      Mazda B-Series with PRE-OBDII Models 1988, Pre-OBDII Catalytic Converter by MagnaFlow®. Emissions: CARB compliant. Converter Configuration: Direct Fit. Without Air Tube. Without O2 Sensor Port. Catalytic Outlet Diameter: 2". If your car...
      $287.41 - $384.51
    • (0 reviews)
      # 380871544
      Mazda B-Series with PRE-OBDII Models 1988, Pre-OBDII Catalytic Converter by MagnaFlow®. Emissions: CARB compliant. Converter Configuration: Universal Fit. Without Air Tube. Without O2 Sensor Port. OEM Spec. If your car needs a new...
      $95.90 - $136.05
    • (0 reviews)
      # 380871542
      Mazda B-Series 1988, Standard Catalytic Converter by MagnaFlow®. Emissions: EPA compliant. Converter Configuration: Direct Fit. With Gasket. Without Air Tube. With Pre and Post-Cat O2 Sensor Ports. If your car needs replacement, install...
      $132.95 - $266.74
    • (0 reviews)
      # mpn1033607
      Mazda B-Series 1988, Standard Catalytic Converter by MagnaFlow®. Emissions: EPA compliant. Converter Configuration: Universal Fit. Position: Rear. Catalytic Converter Body Shape: Round. Without Air Tube. Without O2 Sensor Port....
      $71.08
    • (0 reviews)
      # mpn615953320
      Mazda B-Series 2.2L Canada Built 1988, PCV Breather Element by WIX®. Wix Breather Filters remove chemical contaminants and particulate matter from the crankcase. They are made of pleated paper and connected to the breather tube. These...
      Low air flow restrictionIncludes a pleated paper filter
      $1.57
    • (0 reviews)
      # mpn3440720162
      Mazda B-Series 2.6L 1988, Catalytic Converter Gasket by Beck Arnley®. Location: Exhaust Pipe to Intermediate Pipe. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle...
      OE quality products from top original equipmentTop quality materials
      $2.96
    • (0 reviews)
      # mpn53642780
      Mazda B-Series 2.2L 1988, Intermotor™ PCV Valve Grommet by Standard®. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products, competitive prices and the highest...
      OE quality parts from top original equipment and aftermarket manufacturersThe finest quality at a great price
      $2.94
    • (0 reviews)
      # mpn111157
      Mazda B-Series 2.2L 1988, PCV Valve Grommet by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to import vehicles in...
      OE quality products from top original equipmentTop quality materials
      $2.31
    • (0 reviews)
      # mpn1432578
      Mazda B-Series 2.2L 1988, EGR Valve Gasket by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the gaskets meet...
      Direct OEM replacement for a proper fitEnsures reliable sealing performance
      $2.93
    • (0 reviews)
      # 939597612
      Mazda B-Series 1988, PCV Valve by Standard Motor Products®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs...
      Made to keep your vehicle's engine running coolDesigned to maintain proper cooling level and prevent overheating
      $1.75 - $3.78
    • (0 reviews)
      # 1083713229
      Mazda B-Series 1988, Catalytic Converter by PaceSetter®. Emissions: EPA compliant. Converter Configuration: Direct Fit. If you want to get the most out of your vehicle, this PaceSetter product is second to none. Engineered with...
      Direct-Fit Catalytic Converters are a direct replacement for original equipmentManufactured using mandrel-bent 16-gauge and stainless steel tubing
      $104.09 - $138.51
    • (0 reviews)
      # mpn4524528851
      Mazda B-Series 2.2L 1988, Diesel Particulate Filter by PaceSetter®. Emissions: EPA compliant. Converter Configuration: Direct Fit. Position: Front. If you want to get the most out of your vehicle, this PaceSetter product is second to...
      Diesel Particulate Filter are a direct replacement for original equipmentManufactured using mandrel-bent 16-gauge and stainless steel tubing
      $184.82
    • (0 reviews)
      # mpn4481806407
      Mazda B-Series 2.2L 1988, PCV Valve Grommet by Ishino®. Is your CHECK ENGINE light on? Has your vehicle failed a state emissions test? Your vehicle's emissions control system is in need of repair, but before you waste your time and gas...
      High quality at an affordable priceExpertly made from premium materials
      $1.39
    • (0 reviews)
      # 585546835
      Mazda B-Series 1988, Professional™ Oxygen Sensor by ACDelco®. Position: Upstream. If your O2 Sensor is not functioning properly, you are robbing yourself of performance and costing yourself money at the gas pump. Let ACDelco’s...
      ACDelco Professional Oxygen Sensors earn the name ACDelco by being put through a variety of tests, often under extreme and unusual conditionsCustomers can receive better gas mileage with a properly working oxygen sensor
      $39.05 - $39.29
    • (0 reviews)
      # 81771850
      Mazda B-Series 1988, Oxygen Sensor by Delphi®. Position: Upstream. As one of the leading suppliers of oxygen sensor technology since 1978, Delphi planar technology is the result of their OE and aftermarket engineers partnering together...
      OE connectors and wire lengths within 3" of OE specificationsResists high temperatures, vibration damage and wire corrosion to protect signal accuracy, and long life
      $24.19 - $37.62
    • (0 reviews)
      # 82962115
      Mazda B-Series 1988, PCV Valve by Luber-finer®. PCV valves are designed to precisely return crankcase combustion gases to the air intake system. Overextending the part’s service promotes sludge formation, which clogs the engine's...
      Return crankcase combustion gases to the air intake systemDesigned to deliver optimum performance
      $3.28 - $3.68
    • (0 reviews)
      # mpn4479933865
      Mazda B-Series 2.2L 1988, Professional™ PCV Breather Element by ACDelco®. Replaceable Filter. Designed utilizing the latest technology, this product by ACDelco features premium quality and will perform better than advertised. Perfect...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $6.32
    • (0 reviews)
      # mpn1363888
      Mazda B-Series 2.2L 1988, PCV Breather Element by Hastings®. The crankcase ventilation system channels harmful crankcase vapors to the air intake so they can be burned along with the air/fuel mixture. The Crankcase Breather Filter...
      Properly filters air drawn through the crankcase ventilation systemPrevents dirt and abrasives from damaging the engine
      $1.39
    • (0 reviews)
      # mpn474123097
      Mazda B-Series RWD 2.6L 1988, Catalytic Converter Gasket by AP Exhaust®. This superior product was carefully designed with key attention to detail and manufactured from high-grade materials to the strict standards of the highest...
      Made from first-rate materialsEnsures outstanding durability
      $5.53
    • (0 reviews)
      # mpn53645957
      Mazda B-Series 2.2L 1988, Intermotor™ EGR Valve Gasket by Standard®. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products, competitive prices and the highest...
      OE quality parts from top original equipment and aftermarket manufacturersThe finest quality at a great price
      $3.92


    Guides & Articles

    Useful articles fast to read and guides easy to understand written by mechanics and car enthusiasts to turn your shopping experience with CARiD into a pleasure

    • Replacement Emission Control Parts
      August 18, 2014
      Oxygen Sensors - Why Does My Car Have Four, And...
      An oxygen sensor (also known as an O2 sensor or Lambda sensor) is a sensor designed to generate a reading based on the content of oxygen in an automotive exhaust...
      by Michael Grayen
    • Ignition Parts
      August 10, 2014
      Auto Parts: Dealer vs. Aftermarket
      The question of whether to buy parts from an automotive dealer vs. ones from aftermarket manufacturers is as age-old as the automobile itself. Below, we'll take a look...
      by Timothy Zahl

    Popular Products




    1988 Mazda B-Series Models


    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.