Nissan Pick Up Trailer Hitches
The Nissan Pickup is a mid-size vehicle with impressive off roader credentials. It has a superb drive quality and impressive handling. The Pickup has a large truck bed, large enough to carry a large load. It also has a big engine and awesome towing capability. Though, the Pickup has a large cargo area, its utility value will be greatly increased by a trailer attached to its back. You will need a trailer hitch from CARiD to attach the trailer to your car. However before you identify your preferred hitch, consider your Pickup’s towing capability and the size of your trailer. Also, consider how you would go about distributing the load to ensure the car remains stable on the road. CARiD stocks different types of Nissan Pickup trailer hitches for its varied customer base. The Gooseneck and 5th wheel trailer hitches are the most appropriate for pickup trucks and larger trailers. Trailers typically transfer 10% of their weight on to the trailer tongue. This weight is dumped directly on the rear axle, allowing the driver to drive in crosswinds. The trailer rig also appears shorter because a portion of the trailer lies on the truck bed.
You also need to ensure that the load on the trailer is distributed evenly to ensure stability is enhanced. Insufficient tongue weight has been identified as the primary cause of trailer sway. Nissan Pickup trailer hitches are designed are resilient and resistant to corrosion. They come fully welded and ready to bolt onto your vehicle. Installation is not complicated. You need to drill a few holes on the truck bed to secure the hitch. The manufacturers provide a template to enable you place the holes properly. They also provide all the accessories you need to set up your hitch successfully. They further guarantee the quality of the hitch by providing a nationwide limited warranty guaranteeing against defects in quality and workmanship.
Here at CARiD we have a loyal set of customers, and they are very involved with their cars. That means using them in many ways, or racing them or towing them to car shows on trailers. They know towing, is what we’re saying. And 27 of them left a number of reviews with an average rating of 4.5 out of 5 stars. We know you’ll feel the same way after towing your toys around, whether it’s a race car, a trailer full of quads or motorcycles or personal watercraft or full-on camper. CARiD has the parts you need to support your hobby!
- Bully® - Chrome Hitch Cover with Nissan LogoStarting at: $27.24$27.24
- Reese® - Class 3 Trailer Hitch with Receiver OpeningStarting at: $188.50$188.50
- Hidden Hitch® - Class 3 / 4 Trailer Hitch with Receiver OpeningStarting at: $185.75$185.75
- Draw-Tite® - Class 3 Max-Frame Trailer Hitch with Receiver OpeningStarting at: $185.75$185.75
- Hopkins® - Towing Wiring HarnessesStarting at: $45.14$45.14
- CURT® - Rear Trailer Hitch with Receiver OpeningStarting at: $190.43$190.43
- Autogold® - Black/Chrome Hitch Cover with Nissan LogoStarting at: $38.76$38.76
- CURT® - Class 3 10" Drop Ball Mount for 2" ReceiversStarting at: $36.14$36.14
- Reese® - Class 3 Quick-Loading Ball Mount for 2" ReceiversStarting at: $18.06$18.06
- Hidden Hitch® - Class 3 Ball Mount for 2" ReceiversStarting at: $26.59$26.59
"Took a little longer than expected to arrive, but my guess is that it was due to the heavy weight of the box. Item arrived undamaged, though I doubt it would have made a difference in this case. Installation was mostly straightforward except for one issue, a muffler bracket was slightly in the way preventing the holes from lining up perfectly. I had to use a grinder to notch the corner of the bracket to accommodate, but 10 minutes later after the notch and a blast from a can of rustoleum spray paint the first side was bolted in no problem. On my Rogue particularly one side of the existing frame holes were rusted and took quite a bit of cleaning out to be able to thread the provided bolts, but that was my car's issue and nothing to do with the product. All in all, installation on this is definitely above beginner as the need for breaker bar to loosen old rusted bolts and need to slightly modify the product with tools that the average Joe may not have puts this solidly in the "intermediate" category in my opinion. Otherwise the item is solid and well built, definitely can take the rated load, and once modified fit perfectly to the existing bolt holes in the frame. I'm completely satisfied with the product at the price paid."
"Cool accessory for my Armada."
"Its primary use is to protect the bumper on my SUV, also adds a good looks to it."
"Very pleased with the service and quality of the product."