Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit

Name: Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit
Brand: Wilwood
SKU: 15995542
Price: 733.74 USD
Availability: OutOfStock

0 reviews|Item # 15995542

Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit

Wilwood® - ESSA 2013 Formula Drift Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit Installation Instructions Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit Features Wilwood® - Catalog Wilwood® - Products Comparison Wilwood® - Tech Tips Guide Wilwood® - Warranty Information Made In USA Wilwood Authorized Dealer

$733.74

OUT OF STOCK - Unavailable until further notice

Guaranteed Fit

1988 Chevy Corvette

with Heavy Duty Brake Option 13" Front Rotors / with STD Brake Option 12" Front Rotors

Authorized Dealer

Product Details

Chevy Corvette with Heavy Duty Brake Option 13" Front Rotors / with STD Brake Option 12" Front Rotors 1988, Drilled and Slotted Rear Rotor and Pad Kit by Wilwood®. This brake pad and rotor combo is the easiest way to greatly improve your vehicle's stopping power and experience better control while braking. The kit includes drilled and slotted slotted iron rotors and a set of premium brake pads made of superior compound.

Specifications

Minimum Wheel Diameter Required: 406.4mm (16")

Driving Style: Performance / Racing

Hat Material: Aluminum

Hat Bolt Circle 1: 5 x 4.75"

Hat Center Register: 2.78"

Hat Mount Type: Fixed Mount

Hat Type: Big Brake Hat - Short Offset

Hat Offset: 0.88"

Rotor Thickness: 20.5mm (0.81")

Outside Diameter: 305mm (12")

Rear End Axle: OEM

Axle Offset: 0

Pad Compound: PM - ProMatrix

Pad Plate: D413

Rotor Construction: 2-Piece

Rotor Material: Spec-37 Iron

Rotor Style: Drilled & Slotted

Rotor Type: Vented

Rotor Construction: With Hat

Rotor Finish: Black Electro Coat

Rotor Vane Type: 36 Curved Vane

Rotor Series: SRP-BLK

Hat Stud Diameter - BC 1: 0.52

Hat Finish Color: Black E-Coat

Dynamically Balanced: No

Includes

Brake Rotors: Driver Side: 160-8497-BK, Passenger Side: 160-8496-BK
Hats: 170-8493
Bolt Kit: 230-8390

Features

Cross-Drill and face slot pattern
Corrosion resistance coating
Smoother engagement feel at the pedal
For ultimate durability in racing use
Precision machined to less than 0.001 tolerance for overall flatness
Suitable for moderate temperature racing and street use
Premium grade, medium weight castings
Brake pads enable fast response
Brake pads feature enhanced friction characteristics
Perfect for street rods, street performance, rally, off-road, road race and industrial driving environments
Proudly manufactured in the United States

Benefits:

Slots help to increase pad bite and improve air circulation
Drilled Holes and Slots create an escape route for debris, dust, gases, and water
Slots clean and de-glaze pad surface for optimum pad coefficient of friction
Drilled rotors improve the appearance of your wheels and provide reduced rotor weight
Vented type of rotors offer much faster heat dissipation

Brake pads found in this kit feature a premium compound that provides more stopping power than any other stock pads. Wilwood SRP Drilled and Slotted Rotors feature a directional cross drill and face slot pattern that improves brake response. The slotted design pushes out brake gases, dust, and other debris for a smooth pad and rotor contact. Cross Drilled design helps to keep temperatures as low as possible by dissolving heat generated during the pad and rotor interface. The unmatched quality and durability of the SRP Drilled and Slotted Brake Rotors make them a perfect brake upgrade to your high-performance vehicle.

The internal vane design of these vented rotors by Wilwood provides excellent heat dissipation during brake cycles. As the wheel spins, the vanes around the edge of the rotor draw air in and pull it through to help cool the rotor. With the extra heat dissipated there will be less brake fade. This rotor design by Wilwood combines the best features of a slotted rotor and cross-drilled rotor allowing your brakes to run cooler and sweep away water and dust. The cross-drilled and slotted rotors improve air circulation and increase brake pad bite, ensuring incredible stopping performance.

Wilwood® Engineering designs and manufactures high-performance disc brake systems. Since founding in 1977, Wilwood has developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Their core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.

Brand:

Wilwood

Part Number:

140-8314-D 220-8517

Installation

Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit Installation Instructions

Warranty

Do not drive on untested brakes. Brakes must be tested after installation or maintenance.

Make sure pedal is firm: Hold firm pressure on pedal for several minutes, it should remain in position without sinking. If pedal sinks toward floor, check system for fluid leaks. DO NOT drive vehicle if pedal does not stay firm or can be pushed to the floor with normal pressure.
At very low speed (2-5 mph) apply brakes hard several times while turning steering from full left to full right, repeat several times. Remove the wheels and check that components are not touching, rubbing, or leaking.
Carefully examine all brake components, brake lines, and fittings for leaks and interference.
Make sure there is no interference with wheels or suspension components.
Drive vehicle at low speed (15-20 mph) making moderate and hard stops. Brakes should feel normal and positive. Again check for leaks and interference.
Always test vehicle in a safe place where there is no danger to (or from) other people or vehicles.
Always wear seat belts and make use of all safety equipment.

General Warnings:

RACING EQUIPMENT AND BRAKES MUST BE MAINTAINED AND SHOULD BE CHECKED REGULARLY FOR FATIGUE, DAMAGE, AND WEAR. DO NOT OPERATE ANY VEHICLE ON UNTESTED BRAKES! ALWAYS UTILIZE SAFETY RESTRAINT SYSTEMS AND ALL OTHER AVAILABLE SAFETY EQUIPMENT WHILE OPERATING THE VEHICLE.

Disclaimer of Warranty:

Purchasers recognize and understand that racing parts and equipment, such as disc brakes, hubs, etc. and all parts, inventory and services manufactured and/or sold by Wilwood Engineering, Inc. are exposed to many and varied conditions due to the manner in which they are installed and used. Purchasers and Wilwood Engineering, Inc. consciously desire to make their own bargain, irrespective of any court decision and purchasers agree upon good faith and in consideration for being allowed to purchase from Wilwood Engineering, Inc. said parts or services. Purchasers expressly acknowledge and understand that Wilwood Engineering, Inc. does not make any affirmation of fact or promise to purchaser, which relates to said parts, inventory, or services that becomes part of the basis of the bargain between Wilwood Engineering, Inc. and purchasers. Nor does Wilwood Engineering, Inc. make, or cause to be made to purchaser any description of the goods sold to purchaser, nor does Wilwood Engineering, Inc. make, or cause to be made, as part of the basis of the bargain with purchasers, any description or affirmation of fact concerning any sample or model of racing parts, and equipment inventory or service.

As further consideration for purchasers using Wilwood Engineering, Inc. racing parts and equipment any and all inventory and services, purchasers acknowledge that due to the differing conditions and circumstances under which all equipment and parts are installed and used, purchasers are not relying on Wilwood Engineering, Inc. skill or judgment to select or furnish the proper part or equipment. Purchasers expressly affirm they are relying upon their own skill or judgment to select and purchase suitable goods.

Wilwood Engineering, Inc. makes no warranties whatsoever, expressed or implied, oral or written, to purchasers. There is no warranty of merchantability made to purchasers. Wilwood Engineering, Inc. further excludes any implied warranty of fitness with respect to racing and equipment, any and all inventory and service.

It is expressly understood and agreed between purchasers and Wilwood Engineering, Inc. that as part of the bargain between Wilwood Engineering, Inc. and purchasers, and in consideration of doing business with each other, all purchasers take, select and purchase said racing parts, equipment, any and all inventory, or services from Wilwood Engineering, Inc. "as is" and "with all faults" and Wilwood Engineering, Inc. shall always provide purchasers with a full and complete opportunity to examine, at purchasers’ leisure and convenience, any racing parts and equipment, any and all inventory, or services when purchasing or contemplating purchasing from Wilwood Engineering, Inc.

If, and in the event that purchasers expressly or impliedly cause representations, or statements or affirmations of fact contrary to this disclaimer of all warranties, expressed or implied, then purchasers agree to indemnify and hold harmless Wilwood Engineering, Inc. in the event of any claim, demand, or legal action against Wilwood Engineering, Inc. by any purchaser.

Purchasers understand and agree that no officer, director, employee, or salesman of Wilwood Engineering, Inc. has any authority to make any statement contrary to the terms of this agreement. On the contrary, Wilwood Engineering, Inc. disavows any statement contrary to what is herein above written.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit

Wilwood® - Drilled and Slotted Rear Rotor and Pad Kit

Product Details

Specifications

Includes

Features

Installation

Related Links

Reviews