Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Honda | CR-Z | 2011-2014 |
Product Details
Stainless Steel Cat-Back Exhaust System with Single Rear Exit by AEM Intakes®. Exhaust System Type: Cat-Back. Exhaust Tubing Material: Stainless Steel. Main Tubing Diameter: 1.75". Exhaust System Sound: Moderate. Get more horsepower with a sporty sound, from a bolt-on system that maintains factory pipe routing and clearances. This stainless steel system will deliver improved performance with OEM quality fit and finish. It comes with everything necessary for installation, including detailed instructions.
Notes
- This product is NOT legal for installation on vehicles required to meet CARB standards and/or registered in California and other states following CARB standards, including NY and ME.
Specifications
| Exhaust System Type: Cat-Back |
| Exhaust Tubing Material: Stainless Steel |
| Exit Location: Single Rear |
| Exit Configuration: Single |
| Main Tubing Diameter: 1.75" |
| Exhaust System Sound: Moderate |
| Muffler Type: Packed |
| Tip Outlet Diameter: 2" |
| Estimated Horsepower Gain: 2.3 HP @ 5700 RPM |
| Exhaust Configuration: Single |
| Exhaust Tip: Brushed Stainless |
| Mid Pipe Material: 409 SS |
| Muffler Material: 304 SS |
| Number of Exhaust Tips: 1 |
| Tail Pipe Wall Thickness: 17 Gauge |
| Tail Pipe Material: 409 SS |
| Horsepower gains based on similar vehicle dynamometer test. Results will vary. |
Includes
- (1) Mid Pipe Assembly (Part Number 83034)
- (1) Rear Pipe and Muffler Assembly (Part Number 83035)
- (2) Gasket; 2.21" ID Flange (Part Number RM-CB84)
- (3) Bolt; M10 x 1.25 x 25mm Flange, Brite Zinc (Part Number RHBA-M10X125X25)
- (6) Nut; M10x1.25 Brite Zinc (Part Number RHNA-M10X125)
Features
- Increased exhaust flow
- Dyno proven gains in horsepower and torque
- Sporty exhaust note
- Mandrel-bent stainless steel tubing
- Muffler constructed from 304 stainless steel
- Factory pipe routing and clearance
- Includes brushed stainless exhaust tips
- Comes with everything required for installation, including detailed instructions
- Proudly made in the USA
AEM has extensive experience improving exhaust airflow to your engine. The engineers at AEM know that reducing restriction results in increased horsepower. Now AEM has devoted its considerable expertise to reducing restriction on the exhaust side. This stainless steel turbo-back exhaust system was developed on the dyno to increase exhaust flow and produce considerable gains in horsepower and torque. The numbers with the exhaust system alone are impressive, but even more power can be gained with the addition of an AEM cold air intake system.
When they ener. They knogineered this system, AEM didn’t just concentrate on poww that you buy an aftermarket exhaust system primarily to boost performance, but they also know that it has to sound right, be relatively easy to install, and last. The AEM turbo-back exhaust system has a sporty sound that’s not so loud that it drones and resonates through the cab, but just sharp enough that you know it’s not stock.
Even though the pipes are larger diameter, AEM retained the factory routing paths and clearances between critical components. All pipes are mandrel bent for smooth bends and to make sure the pipe maintains its size and shape throughout the entire length. Tubes that aren’t mandrel bent can lose a significant percentage of their diameter in sharp bends. All connections feature OEM quality 3/8” stainless steel flanges and O-rings. This system retains the factory catalytic converter and features brushed stainless steel exhaust tips. It comes with everything necessary for a hassle free installation, including detailed instructions with photographs.
Finally, even the best performing exhaust system isn’t worth a thing if it rots away in a few years. To make sure this won’t happen, AEM constructs the muffler and pipes from high grade stainless steel. AEM warrants this exhaust system to be free from defects in materials and workmanship for 5 years on 304 stainless steel components and 3 years on 409 stainless steel parts.
Founded in 1987 by John Concialdi (J.C.) and Bob Sullivan as a tuning performance shop, AEM Intakes® offers cutting-edge products that are rigorously tested in its laboratories, and the company confirms its results on the asphalt of the track. With its location in Compton, California, AEM was embedded in the tuner market from the very beginning. It was a matter of being in the right place, at the right time, with the right technical know-how. Innovation has always been the company’s core competency. It continues to lead the way with high-end products that push the envelope of what is possible. Whether you’re looking for an air filter, air intake system, or exhaust system, you’ll discover uncompromising quality paired with an eye-catching and show-worthy appearance.
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!