1985 Toyota MR2 Custom Headlights

So as the title mentions these lights were not plug & play for my vehicle which is a 1985 Toyota MR2. After fiddling with the outlet the lights plug into I found that I needed to pull the wires out of my plug and arrange them in an entirely different order because the ground, negative & positive were in different places. After that was done on both outlets my vehicle provides these lights turned on. Depending on the order of the wires I needed to change around my lights either worked on low beam, high beam or not at all. Once I had achieved low beam I then had to do some more intense electrical work but to to intense. I had to buy about 7 feet of wire to run from one headlight and only one cause they are both connected. And bring the other half through my firewall into the cabin. I connected the wire right before the outlet and wired a heavy duty switch in my dash as the original dimmer switch did not cause the desired effect. Once was all said and done these lights look fantastic! There was a little bit of black scuffing on the inner of one light but unnoticeable it not looked at to carefully.