Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Chrysler | 300 | 2011-2017 |
| Dodge | Challenger | 2011-2017 |
| Charger | 2011-2017 |
Product Details
Second Generation BurnBox G2™ Module by Z Automotive®. Get this top-of-the-line product thoroughly engineered to boost performance and unlock the full potential of your vehicle. Made with care and professionalism, this product improves gas mileage, ensures unmatched quality, and provides seamless service life.
Features
- Meant for performance, made with expertise
- Allows for easy personalized modifications
- Powered with innovation-driven technology
- Functional in use, easy in install and adjust
Line Lock: The BurnBox G2 Module will use the ABS solenoids to lock the front wheels for burnout purposes. To use this feature, you must stop the car then press the steering wheel LEFT ARROW button and hold it, and press/release the CRUISE + button. Continue to hold the LEFT ARROW button. Once the ABS light on the dash comes on (and EVIC message “Line Lock ON”), pump the brake pedal twice firmly and release. Press the gas pedal, and the rear wheels will break traction. Brakes release when the LEFT ARROW button is released. You can also use a remapped AUX button or Adaptive Cruise button for Line Lock.
The BurnBox G2 Module comes pre-configured with 6 light shows out of the box, plus 3 “make your own” light shows that you can configure with the ZPU utility. There are four ways to control the light shows on the BurnBox G2 Module:
Keyfob: The light show can be turned on by pressing unlock-unlock-lock-unlock from the keyfob. This will start the first light show in the sequence (depending on which show it’s configured to start with). Pressing unlock again will advance to the next enabled show. Pressing lock will turn off the light shows. You may lock the vehicle while the shows are on by pressing the button on the door handle or using the key.
Quick-on: The light show can be activated by moving the High Beam stalk to the forward (hi beam) position, and tap the CRUISE + button. This will start the first light show in the sequence (depending on which show it’s configured to start with). Pressing CRUISE + again will advance to the next enabled show. Moving the High Beam stalk back to its normal position will end the show.
Dash Menu: You can start the show by setting the dash to “Audio” mode, then press the left arrow and tap cruise CANC button. “Lightshow?” will display on the dash. Hold left arrow and tap cruise on/off (center) button to turn on the first light show in the sequence. Again to advance to the next show. Exit the menu (left arrow and CANC) to turn off the show.
AUX buttons or Adaptive Cruise buttons: See the button remap instructions below. You can use the mapped buttons to quicly access any one of the light shows. Press to toggle on/off. If the dash is set to “audio” you will see a confirmation message of the light show on or off.
Known for its state-of-the-art plug-in devices designed to change vehicle settings and provide some extra functions that were not available from the factory, Z Automotive is an uncompromising leader in the industry. The definitive first company’s mod is the Tazer that activates SRT drive and cool down modes, line lock, performance pages, and tons of other settings. Z Automotive® also provides the mini option offering the same features set in a smaller package. Another featured product is the Tazer RAM allowing you to change gear ratio, tires TPMS, speedometer and lights parameters, and more. The company’s inventory is not limited just to mods, it also provides high-grade cameras, harness, and numerous accessories.
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!