RadioPRO4 Interface by PAC®. Radio replacement interface with built in steering wheel control retention. An all in one radio replacement and SWC interface, the innovative RadioPRO4 comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation.
Notes
It is very important that the second from last digit of the revision number on your module matches the second from last digit of the new firmware file revision number
Does not retain uConnect
Does not retain blind spot detection system
CHYRVD harness required to retain factory reverse camera and VES. Please check vehicle compatibility of the CHYRVD
In Premium Amplified Systems only two input channels can be used from the aftermarket radio, therefore there will be no fading capability of the aftermarket stereo
Features
Retains steering wheel controls (pre-programmed)
Data controlled accessory and navigation outputs
Retains factory amplifier
Factory RSE activation
12V ACC output (RAP)
Vehicle Speed Sense (VSS)
Illumination
Reverse trigger
Parking brake output
Patent # 8,014,540 & 8,184,825
INSTALLATION INSTRUCTIONS It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software.
DETAILED INSTRUCTIONS If this is the first time, download and install "PAC-UP Interface Updater". This will install the necessary software to update the firmware on the RP Interface. This can be found at in the "Download" tab at the very bottom of the firmware list on this page. Download the firmware file to a location on your computer that you can easily find. Open the Interface Updater Program by going to Start > All Programs > AAMP of America > Interface Updater. Connect the PAC-UP to the computer using supplied USB cable. Connect the PAC-UP to the RP Interface. Click the "Connect" button to establish connection between the PAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, disconnect the PAC-UP from the computer, restart the software, then reconnect the PAC-UP and try again. Select your RP Interface from the "Interface select" pull down menu. Click "Update firmware". The new firmware can be found where you saved it before beginning. Once the files are chosen the update will begin. When successful it will show the text "End Update".
The Pacific Accessory Corporation - better known as PAC® - has been a major player in the OEM integration business since the 1970's, back when the 8-track player was the iPod of the day and replacing a radio involved hours of cutting and splicing. Fast forward 30+ years to the present and PAC is an established and trusted leader in the mobile electronics industry and the world's largest and most advanced supplier of OEM integration solutions. But, even though they have grown beyond their wildest dreams, their goal now - as it was back in the 70's - is simple: to provide distributors, dealers and installers with the latest products, solutions, support and training necessary to satisfy the needs of customers.
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
PAC® - RadioPRO4 Interface
/0
Questions and Answers
(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!