RadioPRO Radio Replacement Interface by PAC®. Radio Replacement Interface with Built-In OnStar™ Retention, Pre-Programmed Steering Wheel Control Retention and Navigation Outputs. An all in one radio replacement and SWC interface, the innovative RadioPRO5 comes pre-loaded with OnStar retention, amplifier retention, SWC software, navigation based output signals and other features that save time and money during installation.
Notes
It is very important that the second from last digit of the revision number on your module matches the second from last digit of the new firmware file revision number.
Features
Retains OnStar™ and functions when the factory radio is replaced
Retains steering wheel controls (pre-programmed)
Retains factory Bluetooth (2009+ model vehicles)
Retains rear seat audio controls
Retains all warning chimes (chime module included)
Retains back-up sensors/park assist
Retains factory BOSE and premium Bose audio systems (does not support fading)
Compatible with non-amplified audio systems
Supports dual zone audio functions
Chime volume adjustment (factory buttons)
Rear Seat Entertainment Retention
Retained accessory power output (RAP)
Reverse Wire output
VSS (Vehicle Speed Sense) output
Illumination output, Parking brake output
Includes antenna adapter
Patent # 8,014,540 & 8,184,825
Installation Instructions
It is VERY important that you use the latest version of Interface Updater. Not doing so may damage the interfaces software.
Detailed Instructions
If this is the first time, download and install "PAC-UP Interface Updater". This will install the necessary software to update the firmware on the RP Interface. This can be found at in the "Download" tab at the very bottom of the firmware list on this page. Download the firmware file to a location on your computer that you can easily find. Open the Interface Updater Program by going to Start > All Programs > AAMPof America > Interface Updater. Connect thePAC-UP to the computer using suppliedUSBcable. Connect thePAC-UP to the RP Interface. Click the "Connect" button to establish connection between thePAC-UP and the computer. The "Connected" check box will be checked if successful. If unsuccessful, disconnect the PAC-UP from the computer, restart the software, then reconnect thePAC-UP and try again. Select your RP Interface from the "Interface select" pull down menu. Click "Update firmware". The new firmware can be found where you saved it before beginning. Once the files are chosen the update will begin. When successful it will show the text "End Update".
The Pacific Accessory Corporation - better known as PAC® - has been a major player in the OEM integration business since the 1970's, back when the 8-track player was the iPod of the day and replacing a radio involved hours of cutting and splicing. Fast forward 30+ years to the present and PAC is an established and trusted leader in the mobile electronics industry and the world's largest and most advanced supplier of OEM integration solutions. But, even though they have grown beyond their wildest dreams, their goal now - as it was back in the 70's - is simple: to provide distributors, dealers and installers with the latest products, solutions, support and training necessary to satisfy the needs of customers.
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
PAC® RP5GM11 - RadioPRO Radio Replacement Interface
/0
Questions and Answers
(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!