CGS Exhaust Systems
Since 1995, CGS Motorsports has been helping cars, trucks, and SUVs breathe freely. Over the years, the company's team has gained invaluable experience that lets them add maximum power to engines. Products offered by CGS Motorsports are the result of countless hours of research and testing. The company's engineers take great pains to deliver the whole range of products that will let your vehicle perform at its best.
When you're on the road, there is nothing more satisfying than seeing heads turn as you drive by. It's such a joy to be a proud owner of a truly unique vehicle. And we are not talking about accessories only. The image is never finished until a car sounds as great as it looks. A powerful roar coming from the CGS Motorsports cat-back exhaust system will surely get your heart pumping and make your vehicle stand out wherever you go. Featuring a less restrictive design and more efficient muffler, CGS exhaust systems offer a better flow, increased power, and superb sound.
Having a CGS cat-back system installed, you'll definitely hear the difference. Each CGS exhaust is precisely sculptured from the most reliable materials for you to get the quality you deserve. You'll get a high-flow stainless steel muffler, mandrel-bent aluminized seamless tubing, and a mirror-polished stainless steel tip. After a system is manufactured, it is checked for any imperfections and tested to guarantee maximum increase in horsepower and torque. Accepting no compromise when it comes to quality, CGS Motorsports wants your vehicle to use its full potential.
A good exhaust system is nothing until your vehicle breathes properly, and CGS has you covered here either. The CGS air intake systems are custom-tailored to each application for an exact fit. Each intake is sculptured from the virtually everlasting stainless steels for years of reliable service and mandrel bent to allow for restriction-free air flow. To ensure superior filtration, each and every air intake is topped by a high-flow CGS air filter. Manufactured using cotton element pleats, the filters are enclosed in the wire mesh, which helps CGS products to outperform paper-element air filters.
| Posted by Anthony | (Constantine, MI)
A great product to buy, worth your penny and time. Takes a couple minutes to install.
| Posted by Michael | (Dixon, MO)
I ordered the CGS axle back exhaust for my 09 Chevy. The it wasn't too difficult to install. The sound is great not too loud and it seems to have an increase in performance.
| Posted by Ulises | (Livermore, CA)
Everything came out great, except that the intake is not legal in California!!!
| Posted by Michael | (Tulsa, OK)
Bolt-on installation appeared simple. My muffler shop had to modify the hangers, which required welding. Looks like a solid unit, although time will tell. Too early to tell about performance and fuel economy. My HHR SS does pur now!
| Posted by Julian | (Bessemer, AL)
Bought for 2003 PT. Instructions were clear. Large rubber connector between intake tube and throttle body is a little too large. Used three windings of Gorilla Tape and got a good fit. Lower, smaller tube, a bit short and had a deep crease after installing which did not allow good flow from vent into intake tube. Replaced with longer rubber hose, 1/2 inch I.D. Otherwise, installed very easy. Good sound, noticeably faster throttle response. Very good price.
| Posted by Garie | (Chula Vista, CA)
The exhaust system is exceptional. Had a shop install it and all the pieces fit together nicely. Sound is not too high like you hear on a lot of rice rockets. Has that nice deep tone to it and rumble upon starting the engine. It compliments the look and size of the vehicle.
| Posted by Dean | (Grand Falls-windsor, NF)
I love the product. Sounds deep and throaty, and looks awesome too. I can definitely feel the performance increase also. Great product to purchase, you won't be disappointed!
| Posted by Gary | (Phoenix, AZ)
Installation only took about 20 minutes, I can already see an improvement in fuel mileage and performance.
| Posted by Steven | (San Diego, CA)
Easy to install, takes about 45 minutes. Sounds great, looks great, and most of all, improved horsepower.
| Posted by Mark | (Olympia, WA)
But that's a good thing, I love the sound, reminds me of my 69 SS Camaro. Make sure you have a good floor jack that can lift your vehicle at least 20+ inches. Makes installation much easier.
- Popular CGS Part Numbers
- CGS® 20144 - Air Intake System
- CGS® 20124 - Air Intake System
- CGS® 60067 - Stainless Steel Axle-Back Exhaust System - Single Rear Exit (Mild Sound)
- CGS® 20131 - Air Intake System
- CGS® 20134 - Air Intake System
- CGS® 60016 - Aluminized Steel Cat-Back Exhaust System - Single Behind Right Rear Tire Exit (Mild Sound)
- CGS® 60010 - Aluminized Steel Cat-Back Exhaust System - Single Behind Right Rear Tire Exit (Mild Sound)
- CGS® 60036 - Aluminized Steel Cat-Back Exhaust System - Single Behind Right Rear Tire Exit (Mild Sound)
- CGS® 70073 - Stainless Steel Cat-Back Exhaust System - Single Behind Right Rear Tire Exit (Mild Sound)
- CGS® 60072 - Aluminized Steel Cat-Back Exhaust System - Single Behind Right Rear Tire Exit (Mild Sound)
- CGS® 60027 - Stainless Steel Axle-Back Exhaust System - Single Rear Exit (Mild Sound)
- CGS® 20146 - Air Intake System
- CGS® 20112 - Air Intake System
- CGS® 20145 - Air Intake System
- CGS® 20143 - Air Intake System
- CGS® 60032 - Aluminized Steel Cat-Back Exhaust System - Single Behind Right Rear Tire Exit (Mild Sound)