Product Details
Subaru WRX 2015, Flex A Front and Rear Coilover Kit with 0"-2.9" Front and 0"-3.3" Rear Body Drop by Tein®. Quantity: Sold as a Kit. TEIN has used its years of experience in various motor sports to produce a kit that provides the ultimate balance between comfort and performance. Developed for drivers seeking an aggressive coilover that can be used daily, and provide all the adjustments needed for circuit use. The FLEX damper Kit features the latest technology for all drivers who are seeking performance, and adjustability, while not giving up all ride comfort.
Fitment notes
- Rear: Interior Needs To Be Cut Or Removed, To Avoid Interference.
Specifications
| Front Drop Height: 0.0"-2.9" |
| Rear Drop Height: 0.0"-3.3" |
| Front Coil Sping Tall: 6.9" (175 mm) |
| Rear Coil Spring Tall: 6.9" (175 mm) |
| Front Coil Spring I.D.: 2.6" (65 mm) |
| Rear Coil Spring I.D.: 2.8" (70 mm) |
| Front Coil Spring Rate: 8 kg/mm (448 lbs/in) |
| Rear Coil Spring Rate: 7 kg/mm (392 lbs/in) |
| Coil Spring Finish: Green |
| Shock Absorber Internal Design: Twin-Tube |
| Shock Absorber Type: Hydraulic |
| Shock Absorber Adjustment Type: Single Adjustment |
| Shock Absorber Levels of Damping: 16 Levels |
| Front Shock Absorber Damping Force Adjustment: Yes |
| Rear Shock Absorber Damping Force Adjustment: Yes |
| Front Shock Absorber Height Adjustment Type: Full Height |
| Rear Shock Absorber Height Adjustment Type: Full Height |
| Shock Absorber Reservoir: Without External Reservoir |
| Front Shock Absorber Upper Mount Type: Pillow Ball |
| Rear Shock Absorber Upper Mount Type: Rubber |
| Shock Absorber Upper Mount: Included |
| Front Shock Absorber Camber Plate: No |
| Shock Absorber Finish: Green |
| Shock Absorber Material: Steel |
| Compatible: With Electronic Damping Force Controller (PN EDK04-Q0349, PN EDK04-P8021, PN EDK04-P9669), Motor Kit (PN EDK05-12140) |
Includes
- (2) Front Coilovers
- (2) Rear Coilovers
- (4) Main Coil Springs
- (4) Upper Mount, (4) Lower Spring Seat
- (4) Bump Rubber
- (2) Hook Spanner
- (4) Dust cover
- (1) Sticker Sheet
- Instruction manual
Features
- Steel Construction
- Twin Tube Internal Construction
- Full-Length Adjustable via Threaded Body and Spring Seat/Seat Locks
- 16-Way Damping Adjustable (simultaneous compression and rebound)
- New Damper Valving Specifications for Improved Street Comfort
- Incorporated Advance Needle Design (nearly 200% improvement over predecessor)
- Pillowball Upper Mounts for increased steering feedback
- Camber Adjustable for Strut Type Front Suspensions
- Larger Piston Diameter (22mm O.D.) for Strut Type
- EDFC (Electronic Damping Force Controller)/EDFC Active Compatible
- Powdercoated Brackets and ZT Coated Shellcase for Outstanding Rust Prevention
- One Year Warranty Against Manufacturer's Defects
Tein® was born in rally. Tein’s technological advancements go hand in hand with motorsports activities. Motorsports is crucial for Tein to elevate its engineering and to refine its ideal suspension. Tein embodies the famous ‘Laboratory on Wheels’. Utmost technology comes from the competition fields where winning requires competing for every tenth of a second. All the valuable data obtained from competitions are refined and poured into all Tein products built for the street. To provide the ultimate products Specifications, performance, and durability required for motorsports might be a bit excessive in a way. But, for those who are not satisfied with existing suspensions and are seeking the real quality products, no compromise can be made for any type of product whether it be circuit, gravel, or street use products.