2010 Toyota RAV4 Custom Headlights

Mine fit perfectly and look very good. Install requires dropping the bumper by undoing two 10mm bolts where the fender and the bumper meet under the fender liner, unscrewing a bolt on the fender attatched to the black plastic bracket that holds the bumper in place, and by undoing clips under the hood. Youll ALSO need to unscrew two phillips bolts holding the front bracket in place, mine were very soft and stripped from a hand screwdriver so I ripped off the rubber outer layer and used vice grips. There are a few more 10mm screws holding the headlight units themselves in place, one of which is tucked away towards the front of the car. I have experience with installations like this and so it was understood by me, but I can see where it would be difficult for a less experienced person