Product Details
Nissan Frontier 5' (59.5") Bed 2010, Hard Folding Tonneau Cover with Single Rails by Access®. The LOMAX™ Professional Series makes a bold statement with its revolutionary, low profile design and superior protection. This diamond plate tonneau cover provides a weathertight seal, simple installation and easy one person operation. To prevent elements from entering the truck box, the LOMAX™ Folding Tonneau Cover features aluminum panels with a water shedding design and reinforced vinyl coated hinges. Additional extruded aluminum channels increase the strength of each panel, making the hard tri-fold cover stronger with minimum added weight. The vinyl coated hinges, flexible rubber seals and limited metal-on-metal contact all work together to reduce noise and vibration for a quiet ride. Committed to quality and durability, the LOMAX™ Professional Series is redefining rugged.
Notes
- Drilling is not required.
Specifications
| Cover Type: Hard |
| Tonneau Type: Folding |
| Number of Folds: 3 |
| Mounting Type: Inside of Bed Rails |
| Security: Locking |
| Toolbox Compatible: No |
| Toolbox Included: No |
| Design: Ultra-Low Profile |
| Compatible with Ladder Rack: No |
| Compatible with Headache Rack: No |
| Compatible with Bed Caps: Yes |
| Cover Material: Aluminum |
| Frame Material: Aluminum |
| Finish: Diamond Plate |
Includes
- (1) Tonneau Cover
- Hardwares
- Installation Instructions
Features
Sleek, ultra low-profile design for a smooth look
Sits less than a half inch above the truck box, the classic diamond plate finish of the LOMAX™ Professional Series Cover adds a striking appearance to your truck.
Easy to operate thanks to the quick release system
To open, pull release latch from either side and fold each panel to automatically disengage additional locks. Next, fasten with integrated storage clips. To close, unfasten storage clips and unfold panels using built-in handles. When closed, cover locks automatically at ten points, keeping cargo safe and out of sigh.
Weather-tight seal to keep water and the elements away from your truck bed
The water shedding design and waterproof hinges direct water away from the pickup box, no gutters or drains needed. The aluminum tri-fold tonneau overlaps the box rails with a continuous seal down the full length of the side rails, preventing elements from entering the pickup box.
Strong yet lightweight construction to provide a weight capacity of up to 400 pounds
Extruded aluminum channels support the panels to hold up to 500 pounds of evenly distributed weight, while weighing approximately 60 pounds for a high strength-to-weight ratio.
Integrated storage clips to secure the cover when open
Retractable storage clips secure the truck bed cover and vinyl capped, rigid standoffs keep panels appropriately spaced in the folded position. No adjustments required.
Simple clamp-on installation with no drilling needed
Use eight TIGHT BITE™ Clamps to install rails. Engage hooks by sliding truck cover forward and lowering into retainment brackets. Unfolding panels lock tonneau cover automatically at ten points when closed. No drilling necessary.
Easy to remove and reinstall with no additional tools required
With tonneau cover open and storage clips secured, pull latches on front panel and disengage hooks by sliding cover back; lift to remove. Reinstall by sliding cover forward to engage hooks, then lower to automatically lock in retainment brackets.
Additional extruded aluminum channels increase the strength of each panel, making the hard tri-fold cover stronger with minimum added weight. The vinyl coated hinges, flexible rubber seals and limited metal-on-metal contact all work together to reduce noise and vibration for a quiet ride. Committed to quality and durability, the LOMAX™ Professional Series is redefining rugged.
This hard folding cover uses strong aluminum panels with durable, watertight, reinforced vinyl coated hinges. The panels are made from aluminum alloy used to make commercial trailers and coated with a textured matte black finish to perfectly complement your truck and OEM bed caps. Extruded aluminum channels under the panels keep the hard truck bed cover rigid while reducing weight. Flexible rubber seals, vinyl coated hinges and limited metal-on-metal contact all work together to reduce noise and vibration for a quiet ride.
Access® made a big splash in the market for pick-up truck accessories, when the revolutionary Access® Roll-Up Cover was introduced in 1991. The first of its kind, this product quickly became - and still is - the #1 selling roll-up tonneau in North America. The company has over the years added additional roll-up truck bed covers to the product line, including the popular LiteRider®, Lorado®, Vanish® and all new TonnoSport™. Access is manufactured near Jamestown, North Dakota.
Access® - LOMAX™ Professional Hard Folding Tonneau Cover Installation
Access® - Carbonpro Box Special Side Rail Instructions