2010 Ford Fusion Driveline & Axles

Change Vehicle
1 - 60 of 94 results
show:
sort by:
    • Cardone® CV Axle Shaft
      (0 reviews)
      # 77190791
      Ford Fusion 2010, CV Axle Shaft by Cardone®. CV Axle Shaft. Domestic. Remanufactured constant velocity drive axles are engineered to perform as well as the original design.
      100% Neoprene boots ensure excellent ozone resistance, which eliminates cracking, a leading cause of boot failure.High quality grease withstands high-temperature and pressure extremes, which extends joint life.
      $65.37 - $99.11
    • SurTrack® CV Axle Shaft
      (0 reviews)
      # 63082864
      Ford Fusion 2010, CV Axle Shaft by SurTrack®. This product features a brand new construction with precision machined and heat treated center-shafts, CV joints, bearings and races. The CV axle shaft by SurTrack is manufactured with...
      Designed from the ground up to meet or even exceed all OEM requirements in fit, form and functionEngineered to work at varying angles, constant rotational speeds, without friction and play
      $55.00 - $71.65
    • Motorcraft® Motorcraft Axle Shaft Assembly
      (0 reviews)
      # 23909527
      Ford Fusion 2010, Motorcraft Axle Shaft Assembly by Motorcraft®. Motorcraft axle shaft assembly are designed for maximum performance and durability.
      Direct OEM replacementMeets strict Ford Motor Company standards
      $122.18 - $200.38
    • Dorman® Rear Drive Shaft
      (0 reviews)
      # 79756628
      Ford Fusion Automatic Transmission / Standard (Manual) Transmission 2010, Rear Drive Shaft by Dorman®. 2-Piece. This is an aftermarket part that replaces factory OE # 7E5Z4R602A. A highly cost-effective, innovative repair solution,...
      Dorman-engineered from 100% new materials and rigorously tested for long-lasting durabilityCoated for extended resistance to rust and corrosion
      $579.95
    • Timken® Wheel Bearing and Hub Assembly
      (0 reviews)
      # 78404459
      Ford Fusion 2010, Wheel Bearing and Hub Assembly by Timken®. Bring back the factory-like condition of your vehicle with Timken Wheel Hubs. Constructed from premium materials, these wheel hubs guarantee accurate fit and durability.
      Designed to effectively reduce frictionUltimate load handling capability
      $65.47 - $105.03
    • Quality-Built® Rear Wheel Bearing And Hub Assembly
      (0 reviews)
      # 16457572
      Ford Fusion FWD (Front Wheel Drive) 2010, Rear Wheel Bearing And Hub Assembly by Quality-Built®. Axle Nut Torque Spec: N/R. MPA 100% new wheel hub assemblies feature OE bearing design, integrated G111 induction hardened, raceway...
      Free Tech Support HotlineMeet or Exceed OE Specs
      $32.70
    • Pronto® Rear Wheel Hub Assembly
      (0 reviews)
      # 20214976
      Ford Fusion FWD (Front Wheel Drive) 2010, Rear Wheel Hub Assembly by Pronto®. This assembly is constructed to meet OE configurations and industry leading quality standards. It is designed to ensure precise fit, dependable function,...
      Premium Hub Assemblies by Pronto are designed to reduce friction and improve fuel economyManufactured to meet high quality standards and ISO/TS 16949:2002 specifications
      $38.58
    • Beck Arnley® Rear Wheel Bearing and Hub Assembly
      (0 reviews)
      # 36228283
      Ford Fusion 2010, Rear Wheel Bearing and Hub Assembly by Beck Arnley®. Studs QTY: 5. Studs: With Studs. ABS Sensor Type: External Tone Wheel. Bearing Style: BALL. Type: ABS Compatible. For one hundred years, Beck/Arnley has been...
      OE quality products from top original equipmentTop quality materials
      $43.62
    • Centric® C-Tek™ Standard Rear Wheel Bearing and Hub Assembly
      (0 reviews)
      # 20061730
      Ford Fusion FWD (Front Wheel Drive) 2010, C-Tek™ Standard Rear Wheel Bearing and Hub Assembly by Centric®. Replace a worn or noisy wheel hub with one designed for your specific application. Manufactured using quality components,...
      Exacting fit and functionQuality at an affordable price
      $43.83
    • Centric® Premium Rear Wheel Bearing and Hub Assembly
      (0 reviews)
      # 20062406
      Ford Fusion FWD (Front Wheel Drive) 2010, Premium Rear Wheel Bearing and Hub Assembly by Centric®. Replace a worn or noisy wheel hub with one designed for your specific application. Manufactured using OE quality components, Centric...
      100% OE quality componentsExacting fit and function
      $76.41
    • MOOG® Rear Wheel Bearing and Hub Assembly
      (0 reviews)
      # 57035895
      Ford Fusion 2010, Rear Wheel Bearing and Hub Assembly by MOOG®. If you hear a rumbling noise while driving and have excessive play when the wheel is rocked, you’re in need of new bearings. MOOG has hub assemblies with OE style...
      Exclusive oil seal design eliminates leaking and contaminationIntegral raceway design provides proper clearance between ball and bearing riding surfaces
      $65.85
    • Motorcraft® Brake Hub
      (0 reviews)
      # 72012778
      Ford Fusion 2010, Brake Hub by Motorcraft®. OE Design. Get maximum performance with Motorcraft wheel hubs and bearings. Designed for your specific application, they feature OEM quality and deliver reliable function for maximum...
      Meet OE specifications for each specific applicationRecommended by Ford Motor Company
      $62.41 - $94.93
    • Pilot® Axle Bearing and Hub Assembly
      (0 reviews)
      # 17823656
      Ford Fusion FWD (Front Wheel Drive) 2010, Axle Bearing and Hub Assembly by Pilot®. Hub Assemblies feature high quality metal roller balls with added rollers over OE requirements to create a final product that is capable of bearing...
      Helps you to get the most out of your vehiclePrecision designed to perfectly fit your vehicle
      $46.89
    • NTN® Wheel Hub Assembly
      (0 reviews)
      # 7826136
      Ford Fusion AWD 2010, Wheel Hub Assembly by NTN®. Position: Rear. Do you hear a humming or growling sound as you drive, or a clicking or clunking noise when cornering? If so, your vehicle may need wheel bearing or drive axle...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $85.56
    • SKF® Wheel Hub Assembly
      (0 reviews)
      # 53261381
      Ford Fusion 2010, Wheel Hub Assembly by SKF®. Position: Front. Do you hear a humming or growling sound as you drive, or a clicking or clunking noise when cornering? If so, your vehicle may need wheel bearing or drive axle repairs....
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $162.06
    • Quality-Built® Wheel Bearing
      (0 reviews)
      # 16458253
      Ford Fusion 2010, Wheel Bearing by Quality-Built®, 80mm Outside Diameter. Axle Nut Torque Spec: 189 ft-lbs/256Nm. All-new bearings feature OE form, fit and finish to provide optimal performance and bearing longevity.
      Free Tech Support HotlineMeet or Exceed OE Specs
      $23.54
    • Beck Arnley® Front Wheel Bearing
      (0 reviews)
      # 35807654
      Ford Fusion 2010, Front Wheel Bearing by Beck Arnley®. Inner Diameter: 1.6535". Outer Diameter: 3.1496". Width: 1.7717". For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with...
      OE quality products from top original equipmentTop quality materials
      $47.83
    • Genuine® Wheel Bearing
      (0 reviews)
      # 8815270
      Ford Fusion 2010, Wheel Bearing by Genuine®. Press In Type. Do you hear a humming or growling sound as you drive, or a clicking or clunking noise when cornering? If so, your vehicle may need wheel bearing or drive axle repairs. But...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $105.60
    • Motorcraft® Wheel Bearing
      (0 reviews)
      # 23884161
      Ford Fusion 2010, Wheel Bearing by Motorcraft®. OE Design. Keep dirt, dust, and other contaminants out of your wheel with this premium part. Recommended by Ford Motor Company, Motorcraft wheel seals also retain the bearing...
      Direct replacement for proper fitRecommended by Ford Motor Company
      $60.87
    • National® Wheel Bearing
      (0 reviews)
      # 98321761
      Ford Fusion 2010, Wheel Bearing by National®. Bore: 1.654". Design: Double Row Angular Contact. Inner Race Bore: 1.654". Inner Race Radius: 0.150". Inner Race Width: 1.772". Outer Race Outside Diameter: 3.150". Outer Race Radius:...
      Possesses excellent antifriction propertiesManufactured utilizing computer controlled heat treatment processes for lasting performance
      $45.43
    • Mevotech® Wheel Bearing
      (0 reviews)
      # 98944879
      Ford Fusion 2010, Wheel Bearing by Mevotech®. Quantity: 2 per Vehicle. Premier Line Warranty. Replace your vehicle's old and worn-out bearings with Mevotech wheel bearings. These are designed to minimize noise and vibrations and...
      Reduces noise and vibrationProvides axial and radial support
      $27.35 - $90.48
    • SKF® Wheel Bearing
      (0 reviews)
      # 8768609
      Ford Fusion 2010, Wheel Bearing by SKF®. Do you hear a humming or growling sound as you drive, or a clicking or clunking noise when cornering? If so, your vehicle may need wheel bearing or drive axle repairs. But before you waste...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $71.98
    • Centric® C-Tek™ Standard Axle Shaft Bearing
      (0 reviews)
      # 64762673
      Ford Fusion 2010, C-Tek™ Standard Axle Shaft Bearing by Centric®. This bearing is designed to reduce friction and handle both a radial load when driving in a straight line and thrust load when going around a corner. To prevent...
      Designed to reduce frictionUltimate load carrying capacity
      $15.43
    • Centric® Premium Axle Shaft Bearing
      (0 reviews)
      # 64762676
      Ford Fusion 2010, Premium Axle Shaft Bearing by Centric®. This bearing is designed to reduce friction and handle both a radial load when driving in a straight line and thrust load when going around a corner. To prevent leakage, the...
      Designed to reduce frictionUltimate load carrying capacity
      $40.03
    • SKF® Axle Seal
      (0 reviews)
      # 53261385
      Ford Fusion 3.13" Engine Stroke / 3.41" Engine Stroke 2010, Axle Seal by SKF®. Position: Rear. Do you hear a humming or growling sound as you drive, or a clicking or clunking noise when cornering? If so, your vehicle may need wheel...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $21.57
    • Genuine® Rear Driver Side Manual Transmission Differential Seal
      (0 reviews)
      # 8812245
      Ford Fusion 3.0L / 3.5L 2010, Rear Driver Side Manual Transmission Differential Seal by Genuine®. Do you hear a humming or growling sound as you drive, or a clicking or clunking noise when cornering? If so, your vehicle may need...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $29.86
    • Timken® Wheel Bearing Retaining Ring
      (1 reviews)
      # 20460381
      Ford Fusion 2010, Wheel Bearing Retaining Ring by Timken®. Get optimum vehicle performance with Timken bearings. Timken manufactures ball bearings, cylindrical roller bearings, and tapered roller bearings, and all feature premium...
      Designed to effectively reduce frictionUltimate load handling capability
      $3.28
    • Motorcraft® Wheel Seal
      (0 reviews)
      # 23884217
      Ford Fusion 2010, Wheel Seal by Motorcraft®. Keep dirt, dust, and other contaminants out of your wheel with this premium part. Recommended by Ford Motor Company, Motorcraft wheel seals also retain the bearing lubricant and meet OE...
      Direct replacement for proper fitRecommended by Ford Motor Company
      $9.05 - $9.72
    • Tractech® 33 Spline Rear Detroit Truetrac™ Differential
      (0 reviews)
      # 96812989
      Ford Fusion Ford 8.8" 2010, 33 Spline Rear Detroit Truetrac™ Differential by Tractech®. Diameter Ring Gear: 8.8". Axle Shaft Diameter: 1.32". Gear Ratio: All. 33 Spline. Manufacturer of Axle: Ford 8.8". The Detroit Truetrac is a...
      $663.14
    • Motorcraft® Transfer Case Manual Lever Position Sensor
      (0 reviews)
      # 49315614
      Ford Fusion 2010, Transfer Case Manual Lever Position Sensor by Motorcraft®. Motorcraft transmissionfer case manual lever position sensor are designed for maximum performance and durability.
      Direct OEM replacementMeets strict Ford Motor Company standards
      $66.49 - $239.28
    • Motorcraft® CV Joint Boot Kit
      (0 reviews)
      # 48888990
      Ford Fusion 2010, CV Joint Boot Kit by Motorcraft®. Motorcraft CV joint service kits and boot sets can help save money by allowing for replacement of worn or torn boots before serious damage to the joint occurs.
      Direct OEM replacementMeets strict Ford Motor Company standards
      $114.96 - $202.18
    • USA Standard® 28 or 31 Spline Rear Axles (SLF9-28-31)
      (0 reviews)
      # mpn739976418
      Ford Fusion 2010, 28 or 31 Spline Rear Axles by USA Standard®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by...
      $389.74
    • Ford Motor® Driveshaft Flange Bolt (N800594-S100)
      (0 reviews)
      # mpn1590454240
      Ford Fusion 2010, Driveshaft Flange Bolt by Ford Motor®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Ford...
      $10.62
    • Eaton® 28 Spline Limited Slip Differential (19605-010)
      (0 reviews)
      # mpn1579910703
      Ford Fusion 2010, 28 Spline Limited Slip Differential by Eaton®. Axle Shaft Spline Quantity: 28. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with...
      $453.09
    • Eaton® 31 Spline Limited Slip Differential (19588-010)
      (0 reviews)
      # mpn1579910704
      Ford Fusion 2010, 31 Spline Limited Slip Differential by Eaton®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by...
      $453.09
    • Ford Motor® 1330 Series Slip Yoke (F6ZZ4841BA)
      (0 reviews)
      # mpn1590454242
      Ford Fusion 2010, 1330 Series Slip Yoke by Ford Motor®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Ford...
      $239.24
    • Neapco® 9" Pinion Short End Yoke U-Bolt Style (YYF900600)
      (0 reviews)
      # mpn1579925011
      Ford Fusion 2010, 9" Pinion Short End Yoke U-Bolt Style by Neapco®. Axle Shaft Spline Quantity: 28. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with...
      $93.02
    • Eaton® 35 Spline Differential (19694-010)
      (0 reviews)
      # mpn1579910711
      Ford Fusion 2010, 35 Spline Differential by Eaton®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Eaton will...
      $582.18
    • Motive Gear® Transfer Case Chain (HV012)
      (0 reviews)
      # mpn1578521658
      Ford Fusion 2010, Transfer Case Chain by Motive Gear®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Motive...
      $120.74
    • Crown® Universal Wheel Cap
      (0 reviews)
      # 96198481
      Universal Wheel Cap by Crown®. Crown Automotive is just the ticket if you want to get the most out of your vehicle as well as revel in a more exciting driving experience. You will surely get a real bang for the buck!
      Developed to improve your driving experienceConstructed to ensure ultimate operation
      $9.65
    • National® 8.8" IRS Axle Seal (100537)
      (0 reviews)
      # mpn1269690
      Ford Fusion 2010, 8.8" IRS Axle Seal by National®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by National will...
      $9.94
    • National® 9.75" Axle Seal (100357)
      (0 reviews)
      # mpn1269689
      Ford Fusion 2010, 9.75" Axle Seal by National®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by National will...
      $8.07
    • SKF® 8.8" IFS Axle Seal (18107)
      (0 reviews)
      # mpn1579802197
      Ford Fusion 2010, 8.8" IFS Axle Seal by SKF®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by SKF will last a...
      $14.29
    • National® 9 Pinion Seal (6930)
      (0 reviews)
      # mpn1579516278
      Ford Fusion 2010, 9 Pinion Seal by National®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by National will last...
      $9.41
    • National® Pinion Seal (3604)
      (0 reviews)
      # mpn1307887
      Ford Fusion 2010, Pinion Seal by National®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by National will last a...
      $14.56
    • National® Input Seal (224020)
      (0 reviews)
      # mpn1314815
      Ford Fusion 2010, Input Seal by National®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by National will last a...
      $8.59
    • National® Rear Wheel Seal
      (0 reviews)
      # 88832991
      Ford Fusion 2010, Rear Wheel Seal by National®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by National will...
      $7.60 - $16.58
    • National® Wheel Seal
      (0 reviews)
      # 88833019
      Ford Fusion 2010, Wheel Seal by National®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by National will last a...
      $7.80 - $32.05
    • Competition Engineering® Axle Housing Brace
      (0 reviews)
      # 84311567
      Ford Fusion 2010, Axle Housing Brace by Competition Engineering®. Designed utilizing the latest technology, this part delivers the kind of performance your vehicle needs. Discover the inherit potential and step up the power level...
      $74.49 - $128.74
    • Competition Engineering® Fabricated Rear Axle Housing
      (0 reviews)
      # 84311574
      Ford Fusion 2010, Fabricated Rear Axle Housing by Competition Engineering®. 3" Axle Tubes. 60.75" Length. Designed utilizing the latest technology, this part delivers the kind of performance your vehicle needs. Discover the inherit...
      $642.49 - $781.24
    • PST® Aluminum Driveshaft
      (0 reviews)
      # 84185903
      Universal Aluminum Driveshaft by PST®. 3" OD Driveshafts are made from 6061-T6 DOM. Tubing MIG welded and precision balanced. Drive shaft is fitted with premium 1310 U-Joints on botth ends. Slip Yoke isn't Provided.
      $262.49 - $274.99
    • PST® Carbon Fiber Driveshaft
      (0 reviews)
      # 84185904
      Universal Carbon Fiber Driveshaft by PST®. 3.25" OD. For use with 1310 U-Joints.
      $652.33 - $660.79
    • PST® H/R Driveshaft
      (0 reviews)
      # 84185905
      Universal H/R Driveshaft by PST®. 3" OD Mild steel driveshafts are manufactured from seamless DOM tubing and precisely balanced. Plain Steel unpainted finish. Yokes are popular 1330 on both ends. No slip yoke included. No U-joints...
      $163.93
    • PST® Steel Driveshaft
      (0 reviews)
      # 84185907
      Universal Steel Driveshaft by PST®. Mild steel driveshafts are manufactured from seamless DOM tubing a precisely balanced unit. Each shaft has a gloss white painted finish and includes popular 1310 U joints on both ends. No slip...
      $154.29 - $173.57
    • Mile Marker® Classic Selectro Locking Hubs
      (0 reviews)
      # 88138894
      Ford Fusion 2010, Classic Selectro Locking Hubs by Mile Marker®. 1 Pair. Mile Marker Classic Selectro locking hubs are the tried and true replacements for your older vehicles. Their drivetrain solutions are built for a lifetime of...
      Allows the winch to be quickly installed and removedWinch can be interchanged between front and rear locations on vehicle
      $391.65 - $531.80
    • Competition Engineering® Mild Steel Axle Housing Brace (C3405)
      (0 reviews)
      # mpn584596187
      Ford Fusion 2010, Mild Steel Axle Housing Brace by Competition Engineering®. Designed utilizing the latest technology, this part delivers the kind of performance your vehicle needs. Discover the inherit potential and step up the...
      $101.24
    • Competition Engineering® Rear Axle Housing Ends (C9507)
      (0 reviews)
      # mpn1427625527
      Ford Fusion 2010, Rear Axle Housing Ends by Competition Engineering®. Designed utilizing the latest technology, this part delivers the kind of performance your vehicle needs. Discover the inherit potential and step up the power...
      $132.99
    • Competition Engineering® Rear Large Axle Housing Ends (C9505)
      (0 reviews)
      # mpn584596278
      Ford Fusion 2010, Rear Large Axle Housing Ends by Competition Engineering®. Designed utilizing the latest technology, this part delivers the kind of performance your vehicle needs. Discover the inherit potential and step up the...
      $107.49
    • Eaton® Electronic E Locker Differentials (19660-010)
      (0 reviews)
      # mpn1579910702
      Ford Fusion 2010, Electronic E Locker Differentials by Eaton®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by...
      $789.87
    • Chassis Engineering® 360 Degree Driveshaft Loop
      (0 reviews)
      # 86777531
      Universal 360 Degree Driveshaft Loop by Chassis Engineering®.
      $30.79 - $39.90




    Guides & Articles

    • Replacement Driveline & Axles
      Wheel Bearings: Descriptions of Bearings, Races, Seals, and Hubs
      Wheel bearings are as old and important as the wheel itself thanks to their ability to allow free rotation without the damaging effects of friction and wear. In this article, we’ll define and discuss the individual components so that you are better informed when you are ready to purchase replacement wheel bearings, hubs, seals, and components. We’ll also cover the differences between “wheel bearings” or “axle bearings” mounted at the wheel itself along with “axle shaft bearings” located further inboard along axle shafts. “Bearings” are actually the small round pieces that spin within a bearing assembly. Even though bearings come in a variety of shapes, they all serve the same basic purpose.
    • Replacement Driveline & Axles
      The Difference Between A Transaxle And A Transmission
      In this article we'll look at the differences between a "transaxle" and a "transmission". In short, a transaxle performs both the gear-changing function of a transmission and the power-splitting ability of an axle differential in one integrated unit. A transmission performs the gear-changing function only, delivering power via a single output shaft at the back of the unit. Although both perform gear shifts in the same fashion, there's often confusion about these two terms because the word "transmission" is sometimes used as a blanket description to include transaxles when it should not be.
    • Ignition Parts
      Auto Parts: Dealer vs. Aftermarket
      The question of whether to buy parts from an automotive dealer vs. ones from aftermarket manufacturers is as age-old as the automobile itself. Below, we'll take a look at things worth considering to help you make a better choice if you're facing that same question. Automobile manufacturers and dealerships always advertise the fact that their parts are "genuine" because they were made by the exact same production facility that made the parts installed on the assembly line.

    Popular Products

    2010 Ford Fusion Driveline & Axles Reviews

    Average rating:  5  5 - 1 review
    4.8 of 5
    Nice
    Free advice: Be gentle with your axles as you remove/install them - and don't allow the ends to scrape along the inside of the tube. I had a set of diff seals ready just in case I busted one on the re-install. For extra piece of mind, consider throwing some blue RTV on the rubber portion of the tube seals before you install them.
    TPosted by Thomas J. (Bryan, OH) /
    Was this review helpful for you? Yes3  people found this review helpful.
    2010 Ford Fusion Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.