Fabspeed® - TrackTec™ Valve Bypass Exhaust System with Dual Rear Exit

Name: Fabspeed® - TrackTec™ Valve Bypass Exhaust System with Dual Rear Exit
Brand: Fabspeed
SKU: 1119766974

0 reviews|Item # 1119766974

Fabspeed® - TrackTec™ Valve Bypass Exhaust System Fabspeed® - TrackTec™ Valve Bypass Exhaust System Fabspeed® - TrackTec™ Valve Bypass Exhaust System Fabspeed® - TrackTec™ Valve Bypass Exhaust System Fabspeed® - TrackTec™ Valve Bypass Exhaust System Fabspeed® - TrackTec™ Valve Bypass Exhaust System Fabspeed® - TrackTec™ Valve Bypass Exhaust System Fabspeed® - TrackTec™ Valve Bypass Exhaust System

Fabspeed® - Dyno Session 2017 Porsche 718-S Made In USA Fabspeed Authorized Dealer

$3,055.95 - $3,155.95

OUT OF STOCK - Unavailable until further notice

Guaranteed Fit

2008 Porsche Boxster

with 987 Body

Notes:

Remember to check your local and state laws regarding vehicle noise restrictions.

Authorized Dealer

Product Details

Porsche Boxster with 987 Body 2008, TrackTec™ Valve Bypass Exhaust System with Dual Rear Exit by Fabspeed®. Exhaust System Sound: Aggressive / Loud. Fabspeed esteemed sporty Maxflo Exhaust tone with a raw, race car roar and extra power at the press of a button thanks to muffler bypass valves. One exhaust, two unique tones. Fabspeed engineers are always tinkering, and Fabspeed wanted to try something a little different. Fabspeed incorporated muffler bypass valves into the inlet pipes of Fabspeed Maxflo Exhaust system to unleash an additional raw, race car like tone at the press of a button. With valves closed, the familiar sporty, refined tone of the Maxflo mufflers offers a pleasing level of sound with no droning. With one press of the factory Sport button or Fabspeed valve controller remote, the exhaust is free to travel unrestricted through the 48mm dump tubes bypassing the mufflers.

Notes

Remember to check your local and state laws regarding vehicle noise restrictions.

Specifications

Exit Location: Dual Rear

Exhaust System Sound: Aggressive / Loud

Tip Style: Deluxe Dual Style

Features

Includes remote valve controller kit
Available with Polished or Black Chrome Deluxe Dual-Style tips or Carrera GT Style Tips
Saves 6 lbs from the rear of the vehicle compared to the full OEM exhaust system[:os:]Does not trigger a Check Engine Light
Constructed from high quality 14-16ga CNC mandrel-bent T304 stainless steel for maximum performance and durability
Noticeable improvement in sports car sound and throttle response
Direct replacement for the OEM muffler with no cutting or welding required
All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
Designed to maximize horsepower and torque of your vehicle
Made with meticulous attention to detail and unmatched craftsmanship
Designed to get the most out of your exhaust system

DOES MY CAR HAVE "PSE"?
The Porsche Sport Exhaust - better known as PSE - was a factory option available on many late model Porsches. You can quickly and easily determine if your vehicle is equipped with PSE by taking a look at your center console. If your console has a button on it with an "exhaust tip" icon, then your vehicle is equipped with PSE.

Fabspeed esteemed sporty Maxflo Exhaust tone with a raw, race car roar and extra power at the press of a button thanks to muffler bypass valves. One exhaust, two unique tones.
With one press of the factory exhaust button or Fabspeed valve remote, exhaust is free to travel unrestricted through dump tubes bypassing the mufflers. A frenzy of burbling and crackling erupts with every application of the throttle. A thunderous roar permeates the cabin at just the right volume level.
Comparison of the factory Porsche mufflers and tips from the Boxster/Cayman and Fabspeed Motorsports TrackTec Valved Bypass Exhaust System with Black Chrome tips. Fabspeed systems are modular for easy installation and removal, and are made of high quality T304L stainless steel for durability and performance.
The Fabspeed TrackTec system is available with an assortment of tip options to finish off your exhaust to your liking.
A Fabspeed Valve Controller Kit is included to control the operation of the valves.

For over 20 years, Fabspeed® has been engineering and manufacturing the world's finest stainless steel high-performance exhaust systems and components, air intake products, ECU tuning, and more, specifically-tailored for high-end sports cars and exotics. From Porsche to McLaren, the Fabspeed expertise is unmatched and it shows in everything that the manufacturer creates. Their dyno-proven performance products provide an exhilarating driving experience and are backed by a limited lifetime warranty. Being dedicated to providing maximum performance and true care and concern for the development of their products, Fabspeed strives to be a force of innovation within the industry.

Brand:

Fabspeed

Part Number:

FS.POR.987.TTCBVC FS.POR.987.TTCPVC FS.POR.987.TTCCVC FS.POR.987.TTCC FS.POR.987.TTCB FS.POR.987.TTCP

Warranty

Limited Lifetime Warranty & Conditions

Fabspeed Motorsport USA™ products (excluding catalytic converters) are backed by a Limited Lifetime Warranty against defects in materials and workmanship which is extended to the original purchaser of the product(s). The catalytic converters used in Fabspeed Motorsport products are covered under warranty for 24 months from the date of purchase. Any catalytic converter issue(s) experienced outside of the established 24-month timeframe is the responsibility of the original purchaser.

Disclaimer: There is no warranty of sound quality or volume, as these are completely subjective characteristics.

Upon verification of warranty coverage, Fabspeed® will, at its sole option, repair or replace the defective product without charge. This is the only remedy the Consumer has for any loss or damage, however arising, due to nonconformity in or defect of the product.

Fabspeed Motorsport reserves the right to deny warrant service if it can be proved that the product failed or is failing due to accidental damage, external impact, abuse or misuse, track/race use, shipment, handling, storage, worn or faulty engine mounts and/or exhaust mounts, faulty location or installation, excessive vibration, internal explosion or backfire, maintenance in a manner not conforming to the Fabspeed® instructions, failure of a third party component, or the installation of the part(s) to a vehicle for which it was not intended.
Exhaust mounts and engine mounts must be checked at least every 12 months by a qualified technician and replaced as necessary. Valid evidence of this regular service may be required in the case of a claim. Fabspeed reserves the right to deny warranty replacement or repair if it is proved that a faulty engine or exhaust mount was responsible for the issue in-question. Attempted repair of a faulty Fabspeed product by anyone other than Fabspeed Motorsport or a Fabspeed-approved agent will void this warranty. .

Fabspeed offers a limited lifetime warranty on all of their performance products*. This warranty is offered to the original purchaser and protects against defects in materials and construction.

*Exclusions:
Catalytic converters: 2-year limited warranty (details below);
Exhaust tip finish: 1-year limited warranty;
Exhaust valves & (related electronics): 1-year limited warranty;

Fabspeed Motorsport Catalytic Converter Warranty:
Fabspeed products containing catalytic converters are protected by a 2-Year limited warranty against failure or defects in material and construction. This warranty does not apply if the product(s) has been installed on a vehicle that has been run with leaded race fuel or fuel additives.

In order for Fabspeed to replace a catalytic converter under the warranty, the following conditions and requirements must ALL be met:
1. Catalysts must not show any physical damage or signs of abuse. Signs of abuse include, but are not limited to, motorsport or on-track use, leaded fuel, fuel additives, etc.
2. Catalysts must be no more than two years in age from the original purchase date.
3. There are no visible exhaust leaks anywhere in the exhaust system upstream of the catalysts.
4. Two ECU printouts showing catalyst inefficiency faults. After the first printout the ECU fault memory is cleared. If the fault returns, a second printout should be made and submitted for warranty approval. Printouts must include operating conditions and vehicle hours.
5. No other faults which will alter the OEM or Fabspeed ECU tune air/fuel calibration should be present on the printouts for catalytic inefficiency (for example: codes for fuel trim, O2 sensors, MAF sensor, etc.)
6. A graph of the oxygen sensors before and after the catalyst must be supplied. This graph should show the oxygen sensors in operation on a fully warm vehicle in closed loop operation.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Fabspeed® - TrackTec™ Valve Bypass Exhaust System with Dual Rear Exit

Fabspeed® - TrackTec™ Valve Bypass Exhaust System with Dual Rear Exit

Product Details

Notes

Specifications

Features

Related Links

Reviews