2001 Subaru WRX Performance Suspension

Change Vehicle
1 - 60 of 187 results
show:
sort by:
    • (0 reviews)
      # 119398751
      Subaru WRX STI 2001, Asphalt Rally Spec Front and Rear Lowering Coilovers with 0.5"-2.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Upper Mount: P/U. Rear...
      Set of 4 coilovers with beefed up components that are biased toward longer-distance asphalt rally competitionAll metal pillowball for added strength and responsiveness: A step up from Kontrol Pro coilovers, the heavy duty all steel pillowball adds more strength and better steering response. You may experience slightly more noise with this type of pillowball, which is completely normal when compared to oem suspension where noise is reduced by using rubber parts. KSport patented new top nut and bearing system helps combat noise while turning at slow speeds unlike other coilovers on the market.
      $1,485.00
    • (0 reviews)
      # 119398752
      Subaru WRX STI 2001, Circuit Pro Front and Rear Lowering Coilovers with 0.5"-2.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Spring Rate: 896 lb/in. Rear...
      Set of 4 racetrack-only coilovers designed for long periods of endurance racing and long heat cyclesExternal reservoirs for independent rebound and compression adjustment: KSport Circuit Pro damper systems come standard with external reservoirs which allow adjustment of rebound, compression and nitrogen pressure independently. Possible tuning combinations are 11,664. NOTE: certain vehicles may only have front reservoirs if the vehicle does not have enough allotted space to fit a reservoir in the rear.
      $2,475.00
    • (0 reviews)
      # 119398753
      Subaru WRX STI 2001, Drag Race Version Front and Rear Lowering Coilovers with 0.5"-2.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Upper Mount: P/U. Rear...
      Set of 4 coilovers designed for the rigors of road racing (not intended for normal everyday street use)Spring rates and shock valving specific for drag racing: Carefully chosen spring rates and shock valving to optimize weight transfer while launching. KSport designs each kit differently depending on if your car is FWD, RWD or AWD. Not intended for daily driving use.
      $1,260.00
    • (0 reviews)
      # 119398755
      Subaru WRX STI 2001, GT Pro Front and Rear Lowering Coilovers with 0.5"-2.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Upper Mount: P/U. Rear Upper Mount:...
      Set of 4 coilovers with beefed up components that are biased toward racetrack useInverted steel shock absorber for increased response and heat build up: The main focus of KSport GT Pro damper systems is that they feature an inverted front design. Inverted shocks move the gas/oil chamber farther away from the knuckle and braking system reducing heat transfer. This design also reduces unsprung weight which helps improve handling and responsiveness. NOTE: on inverted shocks the damping knob is at the bottom of the shock. Each kit is supplied with a flexible damping adjustment knob for easier access.
      $1,395.00
    • (0 reviews)
      # 119398754
      Subaru WRX STI 2001, Gravel Rally Spec Front and Rear Lowering Coilovers with 0.5"-1.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Upper Mount: P/U. Rear...
      Specially designed extended length springs for rally racing: Designed specifically for KSport Gravel Rally kits, KSport springs range in length from 250mm to 270mm. NOTE: height adjustment range varies per vehicle, all kits will not go higher than OE ride height.Extended cylinder length and piston stroke: Gravel Rally dampers feature extended cylinder length and piston stroke which greatly improves handling over uneven and bumpy roads.
      $1,485.00
    • (0 reviews)
      # 119398757
      Subaru WRX STI 2001, Kontrol Plus Front and Rear Lowering Coilovers with 0.5"-2.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Spring Rate: 487 lb/in. Rear...
      External Reservoirs: 864 possible settings provided by each Kontrol Plus 2 Way coilover System, it is possible to leave no stone unturned in the quest for ultimate performance from your vehicle’s suspension system.Damping Adjustments: Kontrol Plus 2 way coilover offer 36 levels of damping adjustment via the top of the assembly and an additional 24 levels of nitrogen adjustments via the bottom of the reservoir.
      $1,755.00
    • (0 reviews)
      # 119398756
      Subaru WRX STI 2001, Kontrol Pro Front and Rear Lowering Coilovers with 0.5"-2.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Upper Mount: P/U. Rear Upper...
      Set of 4 coilovers designed with both road racing and street driving in mind36 way adjustable damping: All Ksport coilovers offer 36 levels of damping which allow you the ability to perfectly dial in your coilover system. Set damping to full soft for a nice comfortable cruising setting for normal driving
      $945.00
    • (0 reviews)
      # 119398758
      Subaru WRX STI 2001, Road Race Version Front and Rear Lowering Coilovers with 0.5"-2.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Upper Mount: P/U. Rear...
      Built for racing: Strictly made for track racing only, not recommended for street use. Aggressive spring rates and shock valving combined with 20-30mm shorter shock stroke = unbeatable performance on the track. Your choice of KSport proven spring rate settings or your own custom rates; the shocks will be valved specifically to what you select.Upgraded shock bumpstops: Version RR damper systems come with upgraded bumpstops to prevent the shock from bottoming out over uneven pavement or harsh road conditions.
      $1,260.00
    • (0 reviews)
      # 119398759
      Subaru WRX STI 2001, Slide Kontrol Front and Rear Lowering Coilovers with 0.5"-2.5" Front and Rear Drop Height by KSport®. Quantity: 4 per Pack. With Front Camber Plates. With Rear Camber Plates. Front Upper Mount: P/U. Rear Upper...
      Inverted steel shock absorber for increased response and heat build up: Vehicles with McPherson suspension will come standard with inverted front shocks whereas wishbone/a-arm type vehicles will come with standard non-inverted type shocks. Inverted shocks move the gas/oil chamber farther away from the knuckle and braking system reducing heat transfer. This design also reduces unsprung weight which helps improve handling and responsiveness. NOTE: on inverted shocks the damping knob is at the bottom of the shock. Each kit is supplied with a flexible damping adjustment knob for easier access.Stiffer spring rates and shock damping: Slide Kontrol damper systems are configured with about 30-50% stiffer shock damping compared to the Kontrol Pro system. Stiffer spring rates assist in better initiations while drifting. Helper springs are included in certain applications depending on spring length and shock stroke.
      $1,485.00
    • (0 reviews)
      # 16118584
      Subaru WRX STI 2001, DT-P™ Front and Rear Coilover System by ARK Performance®. Quantity: 4 per Pack. Adjustable Height with 16 Level Dampening. Pillow Ball Mounts. Mono-Tube Shock Design. Bolt-on System for Easy Install. Front...
      All Bolt-on System16 Level Dampening Adjustment
      $1,571.65
    • (0 reviews)
      # 141468393
      Subaru WRX 2001, ST-P™ Front and Rear Coilover Kit by ARK Performance®. Quantity: 4 per Pack. Adjustable Height with 16 Level Dampening. Rubber Mounts. Front Spring Rate: 6kg/mm. Rear Spring Rate: 4kg/mm. ARK Performance ST-P...
      All Bolt-on System16 Level Dampening Adjustment
      $1,444.15
    • (0 reviews)
      # 185220238
      Subaru WRX 2001, ST-P™ Front and Rear Coilover System by ARK Performance®. Quantity: 4 per Pack. Adjustable Height with 16 Level Dampening. Rubber Mounts. Front Spring Rate: 6kg/mm. Rear Spring Rate: 4kg/mm. ARK Performance ST-P...
      All Bolt-on System16 Level Dampening Adjustment
      $1,444.15
    • (0 reviews)
      # 81958366
      Subaru WRX With GDA Chassis Code 2001, Sports-i™ Lowering Coilovers Kit with 0" to -3.2" Front and +1.8" to -3.8" Rear Body Drop by RS-R®. Spirited weekend track drives do not have to sacrifice daily driving comfort or...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $1,799.00
    • (0 reviews)
      # 119718152
      Subaru WRX STI 2001, Airtech Front and Rear Air Suspension System by KSport®. Front Upper Mount: Rubber. Rear Upper Mount: Rubber. KSport offers air suspension kits ranging from no frills with manual paddle controls up through full...
      All air suspension kits include 4 air springs with height adjustability and 36 levels of damping adjustmentBasic kit features 1 Viair 380C air compressor, while Deluxe and above kits feature 2 Viair 380C air compressors
      $2,755.00 - $5,225.00
    • (0 reviews)
      # 99393093
      Subaru WRX GC8 Platform 2001, Performance Air Suspension Lowering Kit by Air Lift®. Quantity: 2 per Pack. Includes: Strut(2), Leader Hose(2), All Mounting Hardware. These are complete air suspension kits that allow over 4 inches of...
      Air bag spring supports are available for factory coil springs and leaf spring designsAvailable in front and rear sets sized for your make and model specifically
      $530.45 - $1,450.00
    • (0 reviews)
      # 119718158
      Subaru WRX STI 2001, Airtech Front and Rear Air Strut Assemblies by KSport®. Quantity: 4 per Pack. Front Upper Mount: Rubber. Rear Upper Mount: Rubber. This is a complete air strut assembly that matches the design of those included...
      Replacement air strut assembly that matches design of those found on complete KSport kitsSave money by replacing only a damaged or worn air strut instead of an entire kit
      $1,995.00
    • (0 reviews)
      # 204439421
      Subaru WRX 2001, Front Strut Mount by Pedders Suspension®. Sold seperately. Strut mounts or bearing plates are an important component of vehicle suspension systems. Strut mounts are the pivot point of your vehicles suspension work...
      Heavy Duty ConstructionDirect OE Fitment
      $62.96
    • (0 reviews)
      # 78864099
      Subaru WRX / WRX STI GC, GM, GF Series 2001, Front Non-Adjustable Sway Bar by H&R®. Diameter: 0.858". H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport...
      Reduces body rollHighest tensile strength available
      $268.63
    • (0 reviews)
      # 78547627
      Subaru WRX 2001, Pro-Alignment Rear Camber Arm by Eibach®. Camber: from -1.5 to +1.5 Degrees. Toe: from -1.5 to +1.5 Degrees. These alignment kits not only assist in adjusting a vehicle's camber back to factory specifications, but...
      Turns Horsepower into Hook-upConsistently Lowers 1/4-mile ET's
      $315.70
    • (0 reviews)
      # 78863440
      Subaru WRX / WRX STI 2001, Triple C Camber Adjustment Bolts by H&R®. Diameter: 0.55". Strut Bracket Width: 1.38"-1.92". Quantity: 1 per Pack. The application is compatible with H&R struts and stock struts. Adjustment range is...
      100% Made in GermanyIncreased safety
      $54.84
    • (0 reviews)
      # 204439423
      Subaru WRX 2001, Rubber Bushings by Pedders Suspension®. 2 Bushes Per Pack. Pedders rubber bushes can be used in a wide variety of applications, and provide a level of insulation between steel components. Pedders rubber bushes are...
      Heavy Duty ConstructionDirect OE Fitment
      $41.36
    • (0 reviews)
      # 119398760
      Subaru WRX STI 2001, Advanced Pillowball Top Mount by KSport®. Quantity: 1 per Pack. This is replacement top mounting plate with greater adjustability than standard ones found in KSport MacPherson type coilover kits. Created to...
      Upgraded top mounting plates with greater adjustability than standard KSport onesUpper plates provide 3 dimensions of adjustability to add correction for wheel caster as well as camber
      $182.00
    • (0 reviews)
      # 104006315
      Subaru WRX 2001, Sway Bar Link by TRW®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your time and gas...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $37.38 - $51.44
    • (0 reviews)
      # mpn474268570
      Universal Ladder Bar Restraint Kit by Alston Race Cars®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs...
      High quality at an affordable priceExpertly made from premium materials
      $60.41
    • (0 reviews)
      # 151405659
      Universal, 5165 Series Driver or Passenger Side Monotube Smooth Body Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: Eye 5/8". Without Boot. Diameter: 1.81". Get the benefits of a remote...
      BILSTEIN’s industry leading monotube designRemote reservoir dramatically increases shock oil capacity for even greater heat dissipation and damping sensitivity
      $184.99 - $211.09
    • (0 reviews)
      # 151405660
      Universal, 7100 Classic Series Driver or Passenger Side Monotube Smooth Body Shock Absorber by Bilstein®. Quantity: 1 per Pack. Without Reservoir. Diameter: 1.81". The 7100 Classic Series are the most successful shock absorbers in...
      Monotube gas pressure constructionThreaded Body Lengths to 10" Travel
      $129.54 - $176.35
    • (0 reviews)
      # 151405661
      Universal, 7100 Classic Series Driver or Passenger Side Monotube Threaded Body Coilover Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without...
      Monotube gas pressure constructionSelf-Adjusting Deflecting Disc Valving
      $202.42 - $315.36
    • (0 reviews)
      # 151405662
      Universal, 7100 Series Driver or Passenger Side Monotube Smooth Body Coilover Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Electroless Nickel with Clear Powdercoat. Lower Mounting: 1/2" Heim. Without Boot. Diameter:...
      Monotube gas pressure constructionSelf-Adjusting Deflecting Disc Valving
      $169.94 - $279.34
    • (0 reviews)
      # 151405663
      Universal, 8125 Series Driver or Passenger Side Monotube Threaded Body Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: 5/8" heim with 1/2" heim spacers (1.5" width spacing). Upper Mounting:...
      Threaded body with dual rate coilover hardwareMonotube design for fade-free performance
      $396.13 - $521.13
    • (0 reviews)
      # 151405664
      Universal, 9100 Rock Crawler Series Driver or Passenger Side Monotube Threaded Body Coilover Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Electroless Nickel. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. With...
      Monotube gas pressure constructionNickel plated 2" diameter threaded body
      $347.43 - $357.49
    • (0 reviews)
      # 151405665
      Universal, 9100 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Electroless Nickel. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. With Reservoir. Without Boot....
      Monotube gas pressure constructionValving can be adjusted internally for rebound and compression.
      $366.93 - $843.81
    • (0 reviews)
      # 142045294
      Universal, 9200 Series Driver or Passenger Side Monotube Bypass 4-Tube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: Eye 5/8". Upper Mounting: Eye 5/8". With Reservoir. Without Boot....
      4-tube, position sensitive with adjustable rebound and compressionMultiple stroke lengths available ranging from 8” to 18”
      $1,154.38 - $1,159.88
    • (0 reviews)
      # 151405669
      Universal, 9300 Black Hawk Series Driver or Passenger Side Monotube Bypass 4-Tube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Clear Anodized. Lower Mounting: 3/4" Heim. Upper Mounting: 3/4" Heim. With Reservoir....
      Monotube internal designOne piece 6061 extruded aluminum body with hard anodized finish
      $2,318.63 - $2,572.73
    • (0 reviews)
      # 151405671
      Universal, AS2 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Clear Anodized. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81". Combining...
      46mm lightweight extruded aluminum body maintains tighter tolerances for superior performanceFine thread body provides precise adjustments in coilover applications (coilover kit sold separately)
      $254.09 - $555.50
    • (0 reviews)
      # 142045296
      Universal, BGT Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Clear Anodized. Lower Mounting: Eye 12.7 mm. Upper Mounting: Eye 12.7 mm. Without Boot. Compression/Rebound:...
      Monotube gas pressure constructionAvailable with or without base valve
      $336.59 - $348.75
    • (0 reviews)
      # 151405672
      Universal, CA4 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Polished Aluminum. Lower Mounting: Eye 15.9 mm. Upper Mounting: Eye 15.9 mm. Without Boot. Diameter: 1.81". Bilstein...
      Monotube gas pressure construction46mm working piston
      $241.31 - $293.03
    • (0 reviews)
      # 151405673
      Universal, CA5 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Polished Aluminum. Lower Mounting: 15.9 mm Heim. Upper Mounting: 15.9 mm Heim. Without Boot. Diameter: 1.81". The...
      Monotube gas pressure construction46mm working piston
      $271.63 - $281.29
    • (0 reviews)
      # 151405674
      Universal, G Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Yellow Paint. Lower Mounting: Eye 12.7 mm. Upper Mounting: Eye 12.7 mm. Without Boot. Diameter: 1.42". Bilstein G...
      Modified Lites and Dwarf CarsThe 36mm monotube steel body design
      $114.50 - $118.13
    • (0 reviews)
      # 151405675
      Universal, M Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Yellow Paint. Compressed Length: 13.90". Extended Length: 21.89". Lower Mounting: Eye 12.7 mm. Upper Mounting: Eye...
      Designed for Stock Cars, IMCA/UMP Modified, Midgets, Mini-Sprints, Modified Lites and Dwarf CarsThe 36mm monotube steel body design
      $123.95 - $127.95
    • (0 reviews)
      # 142045297
      Universal, SA4 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Polished Aluminum. Compressed Length: 9.25". Extended Length: 11.94". Lower Mounting: Eye 15.9 mm. Upper Mounting:...
      Monotube gas pressure construction46mm working piston
      $208.85
    • (0 reviews)
      # 151405688
      Universal, SLS-M Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Compressed Length: 15.00". Extended Length: 23.52". Without Boot. Diameter: 1.81". Sealed steel body shock, converts to...
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $152.92
    • (0 reviews)
      # 151405687
      Universal, SLS Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: Eye 12.7 mm. Upper Mounting: Eye 12.7 mm. Without Boot. Diameter: 1.81". Sealed steel...
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $152.92
    • (0 reviews)
      # 151405680
      Universal, SL Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Without Boot. Diameter: 1.81". Sealed steel body shock, converts to coilover applications.
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $120.80 - $178.93
    • (0 reviews)
      # 151405690
      Universal, SN2 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81". Designed for...
      46mm extruded modular steel body maintains tighter tolerances for superior performanceBody design allows for standard or coilover application
      $177.31 - $196.26
    • (0 reviews)
      # 151405692
      Universal, SNS2 Series Monotube Shock Absorber by Bilstein®. Finish: Zinc Plated. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81". Designed for, but is not limited to, Modifieds, Late Models and...
      Monotube internal designRebuildable; shock can be assembled and disassembled for rapid repair or valving change
      $196.72
    • (0 reviews)
      # 151405693
      Universal, SS4 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Chrome Plated. Lower Mounting: Eye 15.9 mm. Upper Mounting: Eye 11.2 mm. Without Boot. Compression/Rebound: 695/1310...
      Monotube gas pressure constructionDeflective disc valving and dropped solid axle specific mounts
      $119.49 - $152.10
    • (0 reviews)
      # 151405694
      Universal, SZ Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Without Boot. Diameter: 1.81". Sealed steel body shock, converts to coilover applications.
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $120.80 - $152.92
    • (0 reviews)
      # 151405696
      Universal, XVA Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Clear Anodized. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81". Born from a...
      Monotube internal designDual Zone gas bulb results in decreased gas pressure ramp up while increasing grip levels
      $364.06 - $772.25
    • (0 reviews)
      # 151405699
      Universal, XVS-S Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. With Schrader. Without Boot. Diameter: 1.81"....
      Monotube internal designExtreme volume nitrogen bulb
      $323.14 - $384.26
    • (0 reviews)
      # 151405697
      Universal, XVS Series Front or Rear Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81"....
      Monotube internal designExtreme volume nitrogen bulb
      $300.58 - $384.26
    • (0 reviews)
      # 96880639
      Universal, 16 Series Aluminum Circle Track Monotube Threaded Body Shock Absorber by QA1®. Material: Aluminum. The 16 Series shock is a threaded large body shock that is built to last at an affordable price. Adjust your gas pressure...
      2” O.D. hard anodized aluminum threaded monotube bodyLinear or digressive valving available
      $184.55 - $193.78
    • (0 reviews)
      # 96880801
      Universal, 20 Series Circle Track Monotube Sealed Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Are you racing in a series that requires a sealed shock? QA1's 20 Series Sealed Monotube Shock is exactly what you...
      Monotube internal design2" O.D. one piece steel body
      $119.76
    • (0 reviews)
      # 78602466
      Universal, 26 Series Steel Circle Track Monotube Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. The 26 Series shock is a one piece monotube shock that is well suited for a variety of track conditions or as a...
      2" O.D. zinc plated steel monotube bodyAvailable with Hyperscrew, Sealed Hyperscrew (IMCA Lega) or Schrader Valve
      $134.14 - $156.86
    • (0 reviews)
      # 96881418
      Universal, 27 Series Stock Mount Circle Track Driver or Passenger Side Monotube Shock Absorber by QA1®. Quantity: 1 per Pack. The 27 Series is a brand new stock mount monotube shock. Featuring a zinc plated body, 46mm hard anodized...
      Stock mountAvailable with Hyperscrew (27 Series), or Sealed Hyperscrew (27A Series) (IMCA Southern Sport Mod legal)
      $134.14 - $138.40
    • (1 review)
      # 96881685
      Universal, 28 Series Circle Track Monotube Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Valving Identifier: With Expanded Gas Chamber. The 28 Series shock is an expanded gas chamber shock that performs well in...
      2" O.D. zinc plated steel monotube bodyExpanded gas chamber for increased feel, traction and performance
      $221.47 - $249.16
    • (0 reviews)
      # 96881959
      Universal, 50 Series Circle Track Twin-Tube Shock Absorber by QA1®. Body Type: Large. Mounting: Eyelet Bearing/Eyelet Bearing. Material: Steel. Piston: Digressive. The 50 Series features an in-house machined body with a larger...
      2 1/16" Steel twin tube bodyDeflective disc valving
      $110.17
    • (0 reviews)
      # 78602468
      Universal, 51 Series Circle Track Twin-Tube Shock Absorber by QA1®. Body Type: Large. Mounting: Eyelet Bearing/Eyelet Bearing. Material: Steel. Piston: Digressive. Introduced in 2013, QA1's 51 Series is an improved version of the...
      2 1/16" Steel twin tube bodyDeflective disc valving
      $133.91 - $144.10
    • (0 reviews)
      # 96882094
      Universal, 53 Series Stock Mount Circle Track Twin-Tube Shock Absorber by QA1®. Material: Steel. Piston: Digressive. The new 53 Series is a stock mount twin tube shock absorber. Formerly the FC Series, this shock features...
      2 1/16" Steel twin tube bodyStock mount
      $119.76 - $138.40
    • (0 reviews)
      # 78602469
      Universal, 55 Series Circle Track Twin-Tube Shock Absorber by QA1®. Mounting: Eyelet Bearing/Eyelet Bearing. Material: Steel Chrome Plated. Piston: Digressive. Classic look, classic performance. QA1's 55 Series Chrome Plated Twin...
      Twin tube design allows the outer tube to be dented without binding the shock2” O.D. chrome plated steel body
      $96.20 - $105.38
    • (0 reviews)
      # 78602470
      Universal, 59 Series Circle Track Twin-Tube Shock Absorber by QA1®. Body Type: Large. Stroke Length: 9.00". Mounting: Eyelet Bearing/Eyelet Bearing. Material: Steel. Piston: Digressive. A quality, stock appearing, economical choice...
      Twin tube design - The outer tube can get dented without binding the shock.2” O.D. steel body
      $64.26 - $64.55




    Guides & Articles

    • Off-Road Bumpers
      Skid Plates Provide The Ultimate In Off-Road Protection
      If you take your 4x4 off-roading, you have likely gained an appreciation of how unforgiving trails can be when it comes to your vehicle's underside. Deep ruts with rough edges can appear out of nowhere, sturdy-looking rocks can shift unexpectedly, and tranquil bodies of water can hide everything from sinkholes to fallen tree trunks. Before you know it, the underside of your truck has bounced off something hard enough to damage moving suspension components or puncture housings containing engine oil, gasoline, transmission fluid, or differential gear oil.
    • Performance Suspension Parts
      How much lift is needed for larger tires on my 2007-up Jeep Wrangler?
      Twenty years after the first Jeep Wrangler model debuted in 1987, third-generation Wranglers were introduced for the 2007 model year. Unlike any previous Wranglers or CJs, a 4-door Unlimited model (known internally as the "JKU" body) was offered alongside the standard 2-door ("JK" body). Because it took the off-road capability Wranglers are known for and broadened it with the practicality of 4 doors for those needing a family vehicle, third-generation Wranglers have proven very successful in the marketplace. Maintaining Jeep tradition, this Wrangler appeals by offering a higher-than-average number of advantages for the 4x4 enthusiast, whether it's used for rock crawling or as an everyday driver.
    • Performance Suspension Parts
      Coilovers Are Pricey - Why Would I Spend My Money For Them?
      When first glancing through the Performance Coilover Kits section of our website, you may be put off by some of the prices you see. After all, what are you buying other than a combo set of springs and shocks under some fancy name? Certainly, you ask yourself, can't you purchase springs and shocks separately and monetarily come out ahead?
    • Performance Suspension Parts
      Body Lifts & Suspension Lifts From 2 to 10 Inches | What are my Lift Kit Choices?
      Has this happened to you? You catch a glimpse of a truck like yours in a parking lot or around town that, for some reason, you like better than your own. It seems to have a stance that's more rugged-looking and more suited to a 4x4 than yours does. Maybe you get a chance to stop and take a closer look immediately, or maybe it's days or weeks before you see the other truck again.
    • Automotive Tools
      What Special Tools Are Available For Suspension Repair?
      Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
    • Performance Suspension Parts
      Coil, Leaf, & Torsion Bar | Describing The 3 Different Kinds of Springs
      The springs in your vehicle probably aren't something you think about until there's a problem or you've decided to upgrade suspension parts in the interest of sportier handling. But what specifically do springs do? In short, they play a major role in the safe handling and ride comfort of your vehicle. Not only do they keep a vehicle at a designated standing height, they provide recoil necessary to bounce back after suspension components move up and down over uneven road surfaces. By themselves, springs will continue to bounce up and down for a long time unless a motion damper such as a shock absorber is present to keep things stable. Springs can be soft and extremely bouncy, or they can be stiffer and less bounce-prone.
    • Performance Suspension Parts
      How Do Shock Absorbers Work?
      Shock absorbers (also known as "shocks") are the suspension components which slow, then stop, the up-and-down bouncing movement of your vehicle's springs through a process known as dampening. Without shocks to calm things down, springs will continue to extend and release energy they absorb from bumps in the road at an uncontrolled rate - bouncing for a long time until their kinetic energy finally dissipates. Needless to say, this would produce an extremely bouncy ride that would be hard to control over uneven road surfaces.
    • Performance Transmission Parts
      Suspension Enhancements Will Raise The Rear Of Your Tow Vehicle
      If you are using your "daily driver" car or truck for occasional towing duty, you are looking for that ideal sweet spot where the weekday commute is comfortable and quiet, and the weekend trailering feels solid and secure. In other words, you don't want to vehicle to feel too "stiff" during the week, nor do you want it to ride "soft" when pulling a trailer.
    • Wheels & Rims
      Stanced Wheels, Demon Camber | How Do I Get That Look?
      Stanced. Demon camber. You may know it as oni-camber. You've seen the look, and whether you like it or not is totally beside the point. The great thing about this stanced look is that it gets your attention. From the interviews we've read with owners and drivers of these machines, that is exactly what they are after. They've said that it's all about being noticed.
    • Performance Suspension Parts
      Stock vs Performance Suspension
      Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
    • Performance Suspension Parts
      Shocks Versus Struts: The Big Answers Revealed!
      Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
    • Replacement Suspension Parts
      How to Inspect Your Suspension System
      The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most specialists recommend inspecting suspension system after every 6,500-7,500 miles or when there are any signs of its breakage.
    • Performance Suspension Parts
      How Low Can You Go?
      Lowering is high on the list of many people who want to improve the appearance of their car. If you want to lower your car with the coil springs, then replacing them with lowering springs is the way to go. But what if you want to lower your car and also make it handle better? If that’s your goal then consider coil-over shocks.

    Popular Products

    2001 Subaru WRX Performance Suspension Reviews

    Average rating:  5  5 - 10 reviews
    4.8 of 5
    Good Product
    I needed new shocks for my car so I bought QA1 28 series shock absorber. Durable construction, great looks and perfect fit. My car now handles much better without any sacrifice to ride quality.
    JPosted by John (Troy, MI) /
    Was this review helpful for you? Yes
    View More
    Related 2001 Subaru WRX Pages
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.