1987 Ford F-350 Performance Exhaust Systems

Change Vehicle
1 - 60 of 816 results
show:
sort by:
    • (0 reviews)
      # 573040
      Ford F-350 Custom 7.5L with 2.5" Catalytic Converter 1987, Force II™ Aluminized Steel Single Cat-Back Exhaust System with Single Side Exit by Flowmaster®. Exhaust Pipe Material: Aluminized Steel. Exit Location: Single Side Exit....
      Available sound levels: Mild Sound / Mild - Moderate Sound (depends on application and exhaust type)Increases Power
      $356.97
    • (0 reviews)
      # 70304512
      Ford F-350 Base 1987, Scavenger Series Block Hugger Style Ceramic Coated Elite Headers by Flowmaster®. Sema Emissions Code: 3. Compact Rear Dump Configuration. Attachment Method: Ball and Socket Flange. 2 per Pack. Inlet Port...
      Increases horsepower and torqueImproves engine efficiency and throttle response
      $593.19
    • (0 reviews)
      # 203420788
      Ford F-350 Windsor Engine 1987, Block Hugger Headers by Flowtech®. CARB Compliant: No. System Type: Block Hugger. Primary Tubing Diameter: 1.625". Collector Outlet Diameter: 2.5". Flowtech Headers are the perfect combination of...
      Tight fit block hugger design for popular hot rod and street rodsHeavy duty 16-gauge tubing for increased strength and durability
      $179.95 - $349.95
    • (0 reviews)
      # 202712710
      Ford F-350 4WD (Four Wheel Drive) 1987, Mild Steel Long Tube Headers by Flowtech®. CARB Compliant: No. Header Material: Mild Steel. FLOWTECH headers are precision engineered and leak tested to get maximum performance and fuel...
      Mandrel-formed Power Plenum collectors for low backpressureConstructed of .060 cold roll flash mild steel tubing
      $191.95 - $402.95
    • (0 reviews)
      # 201840510
      Ford F-350 1987, Competition™ Full Length Header by Hooker®. Series: Competition™. CARB Compliant: No. Collector Length: 8". Port Shape: Same As Port. All necessary hardware included for a complete installation. Hooker...
      Mandrel-bent tubing for smooth exhaust flowLight weight & sturdy 16 gauge tubing
      $232.95 - $529.95
    • (0 reviews)
      # 64168098
      Ford F-350 4.9L 1987, Super Competition™ Black Painted Full Length Header by Hooker®. Series: Super Competition™. Primary Tubing Diameter: 1.625". Collector Outlet Diameter: 2.5". CARB Compliant: No. Full Length. All necessary...
      Tuned-length primary tubes for maximum exhaust scavenging and velocityMandrel-bent tubing for smooth exhaust flow
      $496.95
    • (0 reviews)
      # 56801729
      Ford F-350 With Ford Small Block Engine Windsor Engine 1987, Crossover Header by Schoenfeld Headers®. Primary Tubing Diameter: 1.625". Collector Diameter: 3". This top-notch product by Schoenfeld Headers is made to give that extra...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $292.45
    • (0 reviews)
      # 197582954
      Ford F-350 With Ford Small Block Engine Windsor Engine 1987, IMCA Modified Headers by Schoenfeld Headers®. Includes: Bolts/Studs, Gaskets. Header made from Steel. Collector Length: 8". This top-notch product by Schoenfeld Headers...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $253.45 - $263.20
    • (0 reviews)
      # 56801715
      Ford F-350 With Ford Small Block Engine 4.9L / 5.0L 1987, Sprint Car Headers by Schoenfeld Headers®. 1 Pair. Header made from Steel. Painted. Primary Tubing Diameter: 1.75". Collector Diameter: 3.5". Collector Length: 13". This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $272.95
    • (0 reviews)
      # 87328158
      Ford F-350 With Ford Big Block Engine 7.5L 1987, Truck Pull Header by Schoenfeld Headers®. 1 Pair. Upsweep 4 x 4, Painted. Includes: Bolts/Studs, Gaskets. Header made from Steel. Collector Diameter: 4". Collector Length: 10". This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $370.45 - $374.35
    • (0 reviews)
      # 203900439
      Ford F-350 with Air Conditioning with Power Steering 1987, Elite Ultra-Duty Full Length Headers by Hedman Hedders®. System Type: Full Length. Collector Outlet Diameter: 3". Hedman's ELITE Hedders are the best you can buy. They have...
      Made of High Quality MaterialsIdeal for Heavy Duty Applications
      $453.57 - $591.76
    • (0 reviews)
      # 97229937
      Ford F-350 Custom with Air Conditioning with Power Steering 1987, Standard Duty Headers by Hedman Hedders®. The standard-duty Hedman Hedders come from the factory with an extremely durable, protective ceramic-metallic coating....
      Made of High Quality MaterialsBuilt to Last
      $227.52 - $626.56
    • (0 reviews)
      # 61588404
      Ford F-350 1987, Direct Fit California Pre-OBDII Catalytic Converter by MagnaFlow®. Catalytic Series: Pre-OBDII. Catalytic Converter Substrate Material: Ceramic. Converter Body Material: Stainless Steel. CARB Compliant: Yes....
      Increases exhaust flow compared to original factory converterIncreased exhaust flow allows your engine to make more power
      $475.57 - $521.02
    • (0 reviews)
      # 61588403
      Ford F-350 1987, Direct Fit Federal Standard Catalytic Converter by MagnaFlow®. Catalytic Series: Standard. Catalytic Converter Substrate Material: Ceramic. Converter Body Material: Stainless Steel. CARB Compliant: No. Converter...
      Converter body manufactured from heavy-duty stainless steelIncreases exhaust flow compared to original factory converter
      $247.65 - $357.92
    • (0 reviews)
      # 97684496
      Ford F-350 Regular Cab / SuperCrew 1987, Dual Pipe Kit by DynoMax®. With their great selection of exhaust pipes and accessories, DynoMax will provide you with everything necessary to complete the exhaust job. Every component is...
      Special reducer design allows for a variety of mounting optionsExtra long 16-gauge tailpipe with side exits and a full 2.25-in. or 2.5-in. diameter
      $163.06
    • (0 reviews)
      # 142860752
      Ford F-350 7.5L 1987, 3-Bolt Reducer with O2 Sensor Fitting by Flowtech®. 3-Bolt. Flowtech understands that when you purchase a set of headers, a muffler, or even an entire exhaust system, you want to know that you’re getting...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $37.50
    • (0 reviews)
      # 97259727
      Ford F-350 5.8L For Stock/Aftermarket CNC Ported Aluminum Heads 1987, Premium Series™ Header Gasket Set by BBK®. Diameter: 1.75". These premium steel core graphite gaskets are flexible for a long lasting leak-proof seal even when...
      Provides a long lasting, leak-proof sealFlexible graphite will conform to surface irregularities and won’t stick to headers or cylinder head
      $39.99
    • (0 reviews)
      # 78901220
      Ford F-350 5.8L 1987, Exhaust Manifold Flange by Vibrant Performance®. Thickness: 0.375". Do you want to get more power out of your vehicle? Then this superior Vibrant Performance product is just for you. Carefully designed for...
      Made of High Quality MaterialsAvailable in different sizes
      $146.21
    • (0 reviews)
      # 202712707
      Ford F-350 1987, Aluminum Header Gasket Set by Flowtech®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by...
      Engineered for a precise, easy fitManufactured of P73 Ferroglass non-asbestos facing material for long life
      $10.04
    • (0 reviews)
      # 202712715
      Ford F-350 HO Engine with Windsor Engine 1987, Real-Seal™ Aluminum Header Gaskets by Flowtech®. Flowtech REAL-SEAL header and collector gaskets are a revolutionary break-through in exhaust sealing technology. Constructed of...
      Multi-Layer “Dead Soft” aluminum conforms to create a leak-proof sealWill not burn or blow out
      $45.62
    • (0 reviews)
      # 201840518
      Ford F-350 HO Engine 1987, Super Competition™ Fiber Header Gasket by Hooker®. Series: Super Competition™. Thickness: 0.07". Hooker's precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust...
      Precision fit for improved sealingSteel core provides superior adhesion
      $12.89 - $13.97
    • (0 reviews)
      # 73935636
      Ford F-350 7.5L 1987, Pressure Master™ Header Seal by Earl's Performance®. Pressure Master™ Seals, designed and manufactured for Earl’s by Parker Hannifin Corporation, were the first high performance seals developed to solve...
      Uses Aerospace TechnologyReusable/Adaptable
      $31.80 - $43.46
    • (0 reviews)
      # 102051952
      Ford F-350 7.5L 1987, Rectangle Aluminum Exhaust Gasket Set by Mr. Gasket®. Aluminum Layered. Size: 1.25" x 2.08". 1/8" Thickness. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $24.95
    • (0 reviews)
      # 102205688
      Ford F-350 1987, Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need gaskets and...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $17.31 - $20.37
    • (0 reviews)
      # 102107798
      Ford F-350 1987, Ultra-Seal™ Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $22.41 - $42.99
    • (0 reviews)
      # 12054694
      Ford F-350 1987, Exhaust Header Gaskets by Spectre Performance®. Package Quantity: 2. Includes: 2 Gaskets. Rooted in racing, Spectre Performance designs and builds every product with the same goal in mind - the best performance in...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      $8.52 - $19.91
    • (0 reviews)
      # 199902510
      Ford F-350 1987, Vibe-Lock Header Bolt Kit by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $49.65 - $91.82
    • (0 reviews)
      # 17606512
      Ford F-350 7.5L Big Block 1987, Exhaust Gasket by Edelbrock®. Port: 1.5"x2.1". Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's gaskets are not only...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $21.83
    • (0 reviews)
      # 61602188
      Ford F-350 7.5L 1987, 0.030" MLS Exhaust Head Gasket by Cometic Gasket®. Compressed Thickness: 0.030". Port Style: Oval. Cometic MLS Gaskets are comprised of multiple layers of stainless steel providing a even load across the...
      Made of High Quality MaterialsBuilt to Last
      $39.64
    • (0 reviews)
      # 91560804
      Ford F-350 7.5L With Big Block Ford Engine 1987, Header Flange Kit, 2" Tube Diameter, Oval Port by Patriot Exhaust®, 1 Pair. Manufactured from 5/16" thick material. Includes Gaskets, Mounting Hardware. Header Flange made from...
      Precision machined flanges5/16" thick
      $48.05
    • (0 reviews)
      # 197582940
      Ford F-350 With Ford Small Block Engine Windsor Engine 1987, Header Flanges by Schoenfeld Headers®. 1 Piece. Header Flange made from Steel. This top-notch product by Schoenfeld Headers is made to give that extra boost that every...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $36.21
    • (0 reviews)
      # 56801465
      Ford F-350 With Ford Small Block Engine Windsor Engine 1987, SAP Port Headers Gasket by Schoenfeld Headers®. 1 Piece. Gasket made from graphite coated metal core. Header Flange Port Shape: SAP. Size: 1.625/1.875". This top-notch...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $13.34
    • (0 reviews)
      # 69377407
      Ford F-350 7.5L With Big Block 1987, Manifold Heat Spacer by BTP®. This premium quality part by BTP helps your exhaust system to perform at its full efficiency as well as provide your vehicle with a more aggressive and powerful...
      Engineered to make your exhaust system perform at its peakProvides a powerful and aggressive sound
      $23.49 - $35.10
    • (0 reviews)
      # 116550769
      Ford F-350 7.5L 1987, Exhaust Manifold Gasket Set by Magnum Gasket®. Standard Material. You'd better be ready to take the heat if you're going to seal an exhaust manifold, where temperatures can often exceed 1,000°F. You can count...
      Made of High Quality MaterialsThe best combination of steel layers and high-temp gasket materials
      $11.22
    • (0 reviews)
      # 144951457
      Ford F-350 1987, Copper Exhaust Header Gasket by Big End Performance®, 1 Pair. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It...
      High quality at an affordable priceExpertly made from premium materials
      $40.28
    • (0 reviews)
      # 95710195
      Ford F-350 Ford Engine 1987, Header Bolt Kit by ARP®. Thread Size: 3/8. Quantity: Set of 16. Package Type: Skin. ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including...
      Designed to unlock more performance out of your vehicleDeliver a reasonable balance of strength and durability
      $25.60 - $163.63
    • (0 reviews)
      # 91087910
      Ford F-350 7.5L With Bigl Block Ford 1987, 3/8"-16 x 3/4" Standard Head Header Bolts by Trans-Dapt®. Size: 3/8"-16 x 3/4". 16 piece set. 3/8"-16 x 3/4". Fastener made from Steel. Standard header bolts, from Trans-Dapt Performance...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $8.36
    • (0 reviews)
      # 114828012
      Ford F-350 1987, Replacement Exhaust Kit by Walker®. If you are looking for the ultimate in quality and value, then this superior replacement exhaust kit by Walker is what you need. All its components are designed with precision...
      Direct fit replacementIncludes all applicable flanges, hangers, and sensor fittings
      $32.14 - $248.93
    • (0 reviews)
      # 16498584
      Ford F-350 1987, Exhaust Manifold by Dorman®. Finish: Natural. Material: Cast Iron. Flange Bolt Hole Quantity: 0. Flange Stud Hole Quantity: 2. Heat Shield Included: No. With Installation Hardware. Manifold Bolt Hole Quantity: 8....
      High Quality tubular construction protects against warping and/or crackingLeak-resistant for long-lasting performance
      $71.95 - $246.95
    • (0 reviews)
      # 131308045
      Ford F-350 1987, Catalytic Converter by Dorman®. Finish: Natural. Material: Stainless Steel. Exhaust Manifold Inlet Port Shape: Round. Without Installation Hardware. Bolt Hole Quantity: 4. Package Type: Box. Includes: 1 Catalytic...
      High Quality construction to ensure long-lasting durabilityReplacement Regulates exhaust emissions and turns off check engine light
      $622.36
    • (0 reviews)
      # 87066703
      Ford F-350 L6 1987, CalCat™ Stainless Steel Small Oval Catalytic Converter by Walker®. Catalytic Series: CalCat™. Catalytic Converter Substrate Material: Ceramic. CARB Compliant: Yes. Converter Configuration: Universal Fit....
      RIGHT loading of precious metalsThe proper catalyst material and design
      $66.47 - $96.33
    • (0 reviews)
      # 18118535
      Ford F-350 1987, Stainless Steel Catalytic Converter by Walker®. Catalytic Converter Substrate Material: Ceramic. CARB Compliant: No. Converter Configuration: Direct Fit. Converter Body Material: Stainless Steel. Inlet Quantity: 1...
      Designed to meet your vehicle’s specific emissions requirementsDirect fit replacement
      $199.80 - $248.93
    • (0 reviews)
      # 87066702
      Ford F-350 L6 1987, Stainless Steel Large Oval Catalytic Converter by Walker®. Catalytic Converter Substrate Material: Ceramic. CARB Compliant: No. Converter Configuration: Universal Fit. Converter Body Material: Stainless Steel....
      Constructed to meet your vehicle’s specific emissions requirementsFeatures stainless steel body with aluminized steel pipe and heat shields
      $75.16 - $114.80
    • (0 reviews)
      # 72351965
      Ford F-350 1987, Catalytic Converter by Bosal®. Converter Configuration: Direct Fit. CARB Compliant: No. If you’re in need of a replacement catalytic converter, you can’t do better than Bosal. They’re a leading supplier to...
      Constructed to meet your vehicle’s specific emissions requirementsRadial flow concept allows for an even distribution of the gas flow in the converter for the optimal conversion of harmful gases
      $193.45 - $287.76
    • (0 reviews)
      # 111789865
      Ford F-350 1987, Direct Fit Catalytic Converter by Eastern®. If you need to replace your failed or damaged catalytic converter, this product is the right choice. Designed specifically for your vehicle, this catalytic converter is a...
      Direct OEM replacementConverts harmful engine emissions to less dangerous gases and water vapor
      $199.49 - $297.45
    • (0 reviews)
      # 100278111
      Ford F-350 5.8L / 7.5L 1987, Standard Universal Fit Undercar Torpedo Catalytic Converter by Eastern®. Inlet A: 3". Outlet A: 3". Overall Length: 28". Converter Body Length: 23". Whether your catalytic converter is damaged by road...
      Universal fitConverts harmful engine emissions to less dangerous gases and water vapor
      $304.28
    • (0 reviews)
      # 100287015
      Ford F-350 1987, Universal Fit Catalytic Converter by Eastern®. Whether your catalytic converter is damaged by road debris or failed due to an engine problem, you definitely need a new one, and this product is the way to go. Made...
      Universal fitConverts harmful engine emissions to less dangerous gases and water vapor
      $61.21 - $231.37
    • (0 reviews)
      # 86069542
      Ford F-350 1987, Catalytic Converter by DEC®. Converter Configuration: Direct Fit. Pick out a catalytic converter by DEC and get your emissions back into check without worrying to fail again. These catalytic converters are made...
      Direct fitMade from a heavy duty stainless steel outer shell
      $460.60 - $539.00
    • (0 reviews)
      # 18181404
      Ford F-350 L6 RWD (Rear Wheel Drive) 137.0" Wheelbase Chassis Cab 1987, Aluminized Steel Round Muffler by Walker®. Inlet Diameter: 2.25". Outlet Diameter: 2.25". Muffler Body Height: 6". Muffler Body Width: 6". Muffler Body Length:...
      Economical performance and acousticsUniversal fit allows for greater installation flexibility
      $32.14
    • (0 reviews)
      # 35465235
      Ford F-350 1987, Aluminized Steel Round Muffler by Walker®. Muffler Body Material: Aluminized Steel. Muffler Body Shape: Round. Muffler Configuration: Offset - Offset. Muffler Type: Combination. CARB Compliant: No. Inlet Quantity:...
      Makes installation quick and easyAn economical replacement for OE components
      $62.04 - $79.43
    • (0 reviews)
      # 18160454
      Ford F-350 V8 137.0" Wheelbase 1987, Quiet-Flow™ Aluminized Steel Oval Muffler Assembly by Walker®. Muffler Series: Quiet-Flow™. Inlet Diameter: 2.5". Outlet Diameter: 2". Muffler Body Height: 4.25". Muffler Body Width: 9.75"....
      Designed for OE equivalent sound and precision fitSpun-locked heads for a proper resistance to backfire
      $71.96
    • (0 reviews)
      # 85230554
      Ford F-350 1987, Quiet-Flow™ Stainless Steel Muffler by Walker®. Muffler Series: Quiet-Flow™. Muffler Body Material: Stainless Steel. Muffler Type: Combination. Mufflers Reversible: No. CARB Compliant: No. Inlet Quantity: 1...
      Designed for OE equivalent sound and precision fitSpun-locked heads for a proper resistance to backfire
      $59.79 - $71.27
    • (0 reviews)
      # 18168751
      Ford F-350 1987, SoundFX™ Aluminized Steel Direct-Fit Muffler by Walker®. Muffler Series: SoundFX™. Muffler Body Material: Aluminized Steel. Muffler Type: Combination. Mufflers Reversible: No. CARB Compliant: No. Inlet...
      Designed to deliver ultimate performance and pleasing sound qualityOE-equivalent direct-fit design
      $44.61 - $45.13
    • (0 reviews)
      # 18173379
      Ford F-350 1987, SoundFX™ Aluminized Steel Muffler by Walker®. Muffler Series: SoundFX™. Muffler Body Material: Aluminized Steel. Muffler Type: Combination. Mufflers Reversible: No. CARB Compliant: No. Inlet Quantity: 1 Inlet....
      Designed to deliver ultimate performance and pleasing sound qualityMay require a few modifications to install
      $32.14
    • (0 reviews)
      # 85230553
      Ford F-350 V8 1987, Aluminized Steel Intermediate Pipe by Walker®. CARB Compliant: No. Material: Aluminized Steel. Outlet Diameter: 2.5". Inlet Quantity: 1 Inlet. Outlet Quantity: 1 Outlet. Inlet Connection Type: 2 Bolt Welded...
      Made of High Quality Aluminized SteelCorrosion Resistant
      $22.27 - $36.47
    • (0 reviews)
      # 18183132
      Ford F-350 V8 1987, Y-Pipe by Walker®. CARB Compliant: No. Outlet Quantity: 1 Outlet. Inlet Connection Type: 2 Bolt Loose Flange with Spherical Flare. Outlet Connection Type: 2 Bolt Welded Flange. If you want exhaust piping that...
      Designed to directly replace the factory partConstructed with OEM type connections
      $54.72 - $143.95
    • (0 reviews)
      # 18178138
      Ford F-350 1987, Tail Pipe by Walker®. CARB Compliant: No. Inlet Quantity: 1 Inlet. Outlet Quantity: 1 Outlet. If you want exhaust piping that delivers precise OE-style fit, appearance, and reliability, this part is your number one...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      $26.41 - $47.28
    • (0 reviews)
      # 18904992
      Ford F-350 1987, Exhaust Manifold Gasket Set by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the...
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      $11.31 - $22.07
    • (0 reviews)
      # 89552074
      Ford F-350 7.5L 1987, Graph-Flex™ Exhaust Header Gaskets by Taylor Cable®. These durable header flange gaskets are composed of a graphite composition material on a malleable stainless steel core. They’ll seal up tight on almost...
      Malleable stainless steel metal coreGraphite composition sealing material for high heat applications
      $23.04
    • (0 reviews)
      # 89552080
      Ford F-350 7.5L 1987, Seal-4-Good™ Exhaust Header Gaskets by Taylor Cable®. Don’t put up with that ominous, unmistakable “tick, tick, tick” sound of an exhaust manifold leak. If it isn’t leaking air into the manifold and...
      Multi-layered for excellent conformability and sealSeals even imperfect flanges
      $33.74




    Guides & Articles

    • Performance Exhaust Systems
      Here's A "Tip": Exhaust Tips Are An Easy Way To Dress Up Your Tailpipe
      Performance exhaust systems give you improvements in power output, sound levels, and appearance, all in one package. But let's face it: not everyone has the spare change to buy and bolt up one of these kits. So you soldier on with what you have. And that may be a tired-looking exhaust system that is still functional. You've spent all day washing and waxing the vehicle's paint and chrome to perfection, but no degree of elbow grease will make that tailpipe look better.
    • Performance Exhaust Systems
      Are Headers Worth The Performance Improvement?
      Engines have often been compared to air pumps, because the engine that’s most efficient in terms of economy and power is the one that can get air in and out of its cylinders the easiest. That’s why most performance modifications like conical air filters, cold air intake systems, headers, and cat-back exhaust systems are aimed at making the intake and exhaust systems less restrictive. These parts increase the flow of air into the engine and ease the flow of exhaust gas out of the engine. Among these components, headers may be the most difficult to install. In this article, we’ll discuss what headers do, their different types, and how much performance they can add to your car.
    • Performance Exhaust Systems
      Are X-pipes and H-pipes Better Than Straight Pipes on Dual Exhaust Systems?
      You may be wondering why so many aftermarket performance exhaust system manufacturers are offering dual exhaust systems connected by "H-pipe" or "X-pipe" sections. After all, aren't two separate pipes, or so-called "true duals", the best for performance? The answer is no, but to understand why we have to examine how a typical internal combustion engine works.
    • Performance Exhaust Systems
      Power, Sound, Looks | Can I Have It All With a Cat-Back Exhaust System?
      It's an age-old question that many have asked. Will an aftermarket exhaust be worth the expense? While they definitely can be, an important question to ask yourself is do you care more about the deeper sound they’re designed to produce, or the added performance gained from being less restrictive? As car enthusiasts, we’ve become accustomed to associating the sound of a car with its exhaust. After all, doesn’t everyone have a childhood memory or two of a car and the particular sound it made?
    • Bed Accessories
      Pickup Truck Cab And Bed Sizes Are Important When Selecting Accessories
      Americans love to have choices. Buying a dress shirt? Decide solid or stripe, short or long sleeve, cotton or poly blend, button or spread collar, regular fit, slim fit, or big & tall. How about a meal at your favorite steak house? Will it be porterhouse, T-bone, or sirloin? Cooked rare, medium-rare, or medium? With baked, mashed, or French fried potatoes? Thirsty for a fancy cup of coffee? Let's not even get started on options that let you end up with a "grande caramel macchiato with 1% low-fat milk, 2 Splendas, and an extra espresso shot".
    • Replacement Exhaust Parts
      Direct Fit vs. Universal Mufflers
      Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which provides a deeper growl with increased power through freer exhaust flow, you'll see choices between "direct fit" mufflers and "universal" mufflers. In this article, we'll help you understand the differences between these two styles so you can make a more informed purchase.

    Popular Products

    1987 Ford F-350 Performance Exhaust Systems Reviews

    Average rating:  4.5  4.5 - 24 reviews
    5 of 5
    Just What I Needed
    As described and at the right price. Easy, fast delivery. A great buy!
    SPosted by Susan (Smith River, CA) /
    Was this review helpful for you? Yes
    View More
    Related 1987 Ford F-350 Pages
    1987 Ford F-350 Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.