1968 Dodge Charger Performance Exhaust Systems

Change Vehicle
1 - 60 of 776 results
show:
sort by:
    • (0 reviews)
      # 23518996
      Dodge Charger 5.2L / 6.3L / 7.0L / 7.2L 1968, American Thunder™ Stainless Steel Dual Header-Back Exhaust System by Flowmaster®. Tip Shape: Round. Exhaust Pipe Material: Stainless Steel. Exhaust Type: Header-Back. Muffler Sound:...
      Moderate SoundIncreases Power
      $733.97
    • (0 reviews)
      # 23518999
      Dodge Charger 5.2L / 6.3L / 7.0L / 7.2L 1968, Delta Force™ Aluminized Steel Dual Header-Back Exhaust System without Tips by Flowmaster®. Without Tips. Exhaust Pipe Material: Aluminized Steel. Exhaust Type: Header-Back. Muffler...
      $756.97
    • (0 reviews)
      # 151798060
      Dodge Charger 1968, Street Series Stainless Steel Crossmember-Back Exhaust System with Tip by MagnaFlow®. Tip Material: Stainless. Muffler Sound: MODERATE. Exit Location: Dual Split Rear Exit. Exit Quantity: Dual. Finish:...
      Moderate SoundDelivers More Horsepower
      $769.25
    • (0 reviews)
      # 68925909
      Dodge Charger 1968, Header-Back X-Pipe Exhaust System by Pypes®. Exhaust Type: Header-Back. Main Piping Diameter: 2.5". Exit Location: Split Rear Dual Exit. Get a lot of bang for your performance buck with this rewarding exhaust...
      Designed to deliver the ultimate in sound and performanceProvides extra punch in the passing lane and improves mileage
      $330.49 - $459.36
    • (0 reviews)
      # 64823596
      Dodge Charger Manual Steering 1968, Mild Steel Long Tube Headers by Flowtech®. CARB Compliant: No. Collector Outlet Diameter: 3". Header Material: Mild Steel. FLOWTECH headers are precision engineered and leak tested to get maximum...
      Mandrel-formed Power Plenum collectors for low backpressureConstructed of .060 cold roll flash mild steel tubing
      $164.95 - $348.95
    • (0 reviews)
      # 64178498
      Dodge Charger G / H / K Engine VIN Character 1968, Competition™ Full Length Header by Hooker®. Series: Competition™. Primary Tubing Diameter: 1.875". Collector Outlet Diameter: 3". CARB Compliant: No. Collector Length: 8". Port...
      Mandrel-bent tubing for smooth exhaust flowLight weight & sturdy 16 gauge tubing
      $280.95 - $626.95
    • (0 reviews)
      # 64178511
      Dodge Charger 1968, Super Competition™ Full Length Header by Hooker®. Series: Super Competition™. CARB Compliant: No. Port Shape: Same As Port. With Hooker Super Competition the objective has always been to make the maximum...
      Tuned-length primary tubes for maximum exhaust scavenging and velocityMandrel-bent tubing for smooth exhaust flow
      $496.95 - $927.95
    • (0 reviews)
      # 91033673
      Dodge Charger With A/C Without in California or states using California emission standards 1968, Steel SAP 4-Tube Full Length Header by Doug's Headers®. Port Shape: SAP. Collector: 3-1/2". Primary Tube: 2". Pair. 2" 3.500". Doug's...
      Reduces backpressure and increases higher RPM horsepowerPrecision formed long transition collectors and long tube design
      $696.57
    • (0 reviews)
      # 91565716
      Dodge Charger 5.2L With Small Block Chrysler Engine 1968, Tight Tuck Street Rod Headers by Patriot Exhaust®. Collector diameter: 2 1/2". Tight Tuck headers are the solution to many problems associated with engine swaps in modern...
      $256.18 - $380.42
    • (0 reviews)
      # 97227711
      Dodge Charger 6.3L 1968, Dyno Weld-up Header Kit by Hedman Hedders®. System Type: Slip-On. Hedman Husler's Dyno Hedder Weld-Up Kits have everything you need to build your own, one of a kind set of custom hedders for use on your...
      Made of High Quality MaterialsBuilt to Last
      $298.99 - $304.74
    • (0 reviews)
      # 97227740
      Dodge Charger 6.3L / 7.0L / 7.2L With Power Steering Box With Auto Transmission Column With Auto Transmission Floor With Manual Transmission Floor With Manual Transmission Column With Air Conditioning (A/C) With Mopar Engine With...
      Made of High Quality MaterialsIdeal for Heavy Duty Applications
      $451.29
    • (0 reviews)
      # 97208313
      Dodge Charger 7.2L 1968, Standard Duty Black MAXX Coated Headers by Hedman Hedders®. System Type: Mid-Length. Primary Tubing Diameter: 1.75"., 1 Pair. Includes Bolts/Studs, Gaskets, Reducers. Header made from Steel. The...
      Made of High Quality MaterialsExtremely durable, protective SATIN BLACK ceramic-metallic coating
      $453.74
    • (0 reviews)
      # 97227743
      Dodge Charger With Power Steering Box With Auto Transmission Column With Auto Transmission Floor With Manual Transmission Floor With Manual Transmission Column With Air Conditioning (A/C) 1968, by Hedman Hedders®. System Type:...
      Made of High Quality MaterialsBuilt to Last
      $198.76 - $428.77
    • (0 reviews)
      # 97227730
      Dodge Charger 1968, by Hedman Hedders®. Hedman’s Standard Block Hugger design is ideal for factory manifold replacement or engine swap projects that do not have a hedder designed specifically for the application.
      Low profile designBuilt of High Quality Materials
      $212.84 - $538.00
    • (0 reviews)
      # 97227750
      Dodge Charger 5.2L 1968, by Hedman Hedders®. Professional car builders and seasoned gearheads use Hedman’s innovative 4-into-1 TIGHT TUBES™ because the collector tucks the header tubes and hook-ups against the engine block for...
      Lowest Profile Header Collector AvailableMade of High Quality Materials
      $277.73 - $603.52
    • (0 reviews)
      # 91021448
      Dodge Charger 1968, Venom 250-Series Muffler by Black Widow®. Muffler Chamber Size: 14"x9"x4". Inlet Diameter: 2.5". Outlet Diameter: 2.5". Finish: 14-Gauge Brushed 430 Stainless Steel. Available in 2.5" and 3" center/center and...
      Made of brushed Stainless SteelHigh performance sound characteristics
      $131.95
    • (0 reviews)
      # 68924813
      Dodge Charger 1968, 304 SS Rectangle Tip by Pypes®. Tip Material: 304 SS. Tip Shape: Rectangular. Upgrade your exhaust system with the superior Pypes Exhaust Tips that will help unleash your engine's beast in no time flat....
      Superior upgrade for your exhaust systemDesigned to provide outstanding performance
      $114.39
    • (0 reviews)
      # 124427475
      Dodge Charger 5.2L / 6.3L / 7.2L without Cutouts 1968, Aluminized Steel Prebend Tailpipes by Flowmaster®. Main Piping Diameter: 2.5". Exit Location: Rear Exit. Material: Aluminized Steel. 2 per Pack. These tailpipes are bare...
      Sold in PairsHangers and Hardware Not Included
      $140.48
    • (0 reviews)
      # 151797877
      Dodge Charger 6.3L / 7.0L / 7.2L 1968, Stainless Steel Front Pipe by MagnaFlow®. Main Piping Diameter: 2.5". Material: Stainless Steel. Inlet Diameter: 2.5". Outlet Diameter: 2.5". Stamped Tru-X Pipe Transitions are great for...
      Gentle Bend Radius For Better Exhaust ScavengingIncreases Torque and Horsepower
      $187.92
    • (0 reviews)
      # 64178503
      Dodge Charger 1968, Super Competition™ Fiber Header Gasket by Hooker®. Series: Super Competition™. Thickness: 0.07". Hooker's precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing....
      Precision fit for improved sealingSteel core provides superior adhesion
      $12.89
    • (0 reviews)
      # 61598419
      Dodge Charger 5.2L 1968, 0.030" MLS Exhaust Head Gasket by Cometic Gasket®. Compressed Thickness: 0.030". Port Style: Stock. Cometic MLS Gaskets are comprised of multiple layers of stainless steel providing a even load across the...
      Made of High Quality MaterialsBuilt to Last
      $38.69
    • (0 reviews)
      # 56801466
      Dodge Charger With Mopar Small Block Engine 5.2L 1968, 1.625" Round Port Exhaust Gasket by Schoenfeld Headers®, 1 Piece. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates....
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $13.34
    • (0 reviews)
      # 97227756
      Dodge Charger 6.3L / 7.2L 1968, Husler Port Flanges by Hedman Hedders®. Comes in a kit. Includes Gaskets, Mounting Hardware. Header Flange made from Steel. Hedman Husler Hedder flanges are the same high quality, port matched...
      Made of High Quality MaterialsBuilt to Last
      $124.69 - $182.78
    • (0 reviews)
      # 144934490
      Dodge Charger 1968, Copper Exhaust Header Gasket by Big End Performance®, 1 Pair.This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind....
      High quality at an affordable priceExpertly made from premium materials
      $34.08 - $40.28
    • (0 reviews)
      # 102203307
      Dodge Charger 1968, Aluminum Exhaust Gasket Set by Mr. Gasket®. Aluminum Layered. 1/8" Thickness. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $24.95
    • (0 reviews)
      # 102203321
      Dodge Charger 1968, Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need gaskets...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $16.29 - $19.35
    • (0 reviews)
      # 102203302
      Dodge Charger 1968, Ultra-Seal™ Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $22.41 - $31.59
    • (0 reviews)
      # 89466843
      Dodge Charger 5.2L 1968, Graph-Flex™ Exhaust Header Gaskets by Taylor Cable®. Type: Rectangle 1" x 1.625". These durable header flange gaskets are composed of a graphite composition material on a malleable stainless steel core....
      Malleable stainless steel metal coreGraphite composition sealing material for high heat applications
      $23.04
    • (0 reviews)
      # 89548576
      Dodge Charger 1968, Seal-4-Good™ Exhaust Header Gaskets by Taylor Cable®. Don’t put up with that ominous, unmistakable “tick, tick, tick” sound of an exhaust manifold leak. If it isn’t leaking air into the manifold and...
      Multi-layered for excellent conformability and sealSeals even imperfect flanges
      $33.74
    • (0 reviews)
      # 89466845
      Dodge Charger 5.2L 1968, XX Carbon™ Exhaust Header Gaskets by Taylor Cable®. Type: Rectangle 1" x 1.625". These durable header flange gaskets are composed of a graphite composition material on a malleable stainless steel core....
      Malleable stainless steel metal coreGraphite composition sealing material for high heat applications
      $20.92
    • (0 reviews)
      # 12053711
      Dodge Charger 5.2L With 1" x 1.64" Ports 1968, Exhaust Header Gaskets by Spectre Performance®. Gasket Material: Compressed Ceramic Fiber. Package Quantity: 2. Thickness: 0.063" (2 mm). Includes: 2 Gaskets. Rooted in racing, Spectre...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      $9.96
    • (0 reviews)
      # 102051697
      Dodge Charger 5.2L 1968, SAE Exhaust Header Bolt by Mr. Gasket®. 12 Pieces. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds,...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $30.57
    • (0 reviews)
      # 95714575
      Dodge Charger 5.2L Mopar Engine 1968, Header Bolt Kit by ARP®. UHL: 0.750. Thread Size: 3/8. Wrench Size: 3/8. Diameter: 5/16. Quantity: Set of 14. Package Type: Skin. ARP manufactures a variety of premium grade bolt and stud kits...
      Designed to unlock more performance out of your vehicleDeliver a reasonable balance of strength and durability
      $23.16 - $32.83
    • (0 reviews)
      # 56806605
      Dodge Charger 6.3L / 7.2L With Big Block Chrysler 1968, Small Head Header Bolts by Trans-Dapt®. 12 piece set. Miniature Head; 3/8"-16 x 3/4".Fastener made from Steel. Mini 3/8" head header bolts make installation and removal a...
      $5.48
    • (0 reviews)
      # 91110605
      Dodge Charger 1968, Standard Head Header Bolts by Trans-Dapt®. Standard header bolts, from Trans-Dapt Performance Have a 7/16" head size for use with headers. For even tighter fitting applications, use Trans-Dapt's Small head bolts...
      $5.45 - $7.40
    • (0 reviews)
      # 114825165
      Dodge Charger R/T 7.0L / 7.2L 1968, Replacement Exhaust Kit by Walker®. If you are looking for the ultimate in quality and value, then this superior replacement exhaust kit by Walker is what you need. All its components are...
      Direct fit replacementIncludes all applicable flanges, hangers, and sensor fittings
      $32.14 - $35.22
    • (0 reviews)
      # 16495138
      Dodge Charger 3.7L 1968, Inline Exhaust Manifold by Dorman®. Finish: Natural. Material: Cast Iron. Exhaust Manifold Inlet Port Shape: Square. Flange Bolt Hole Quantity: 0. Flange Stud Hole Quantity: 2. Heat Shield Included: No....
      Cast iron or stainless tubular construction protects against warping and/or crackingLeak-resistant for long-lasting performance
      $292.95
    • (0 reviews)
      # 123352754
      Dodge Charger R/T 7.0L / 7.2L 1968, Aluminized Steel Oval Muffler by Walker®. Muffler Body Height: 4.25". Muffler Body Width: 8.813". Muffler Body Length: 18". Muffler Overall Length: 26". Muffler Body Material: Aluminized Steel....
      Economical performance and acousticsUniversal fit allows for greater installation flexibility
      $32.14
    • (0 reviews)
      # 123352744
      Dodge Charger R/T 7.0L / 7.2L 1968, SoundFX™ Aluminized Steel Oval Direct-Fit Muffler by Walker®. Muffler Series: SoundFX™. Muffler Body Height: 4.25". Muffler Body Width: 9.75". Muffler Body Length: 19". Muffler Overall...
      Designed to deliver ultimate performance and pleasing sound qualityOE-equivalent direct-fit design
      $35.22
    • (0 reviews)
      # 123352751
      Dodge Charger R/T 7.0L / 7.2L 1968, SoundFX™ Aluminized Steel Oval Muffler by Walker®. Muffler Series: SoundFX™. Muffler Body Height: 4.25". Muffler Body Width: 9.75". Muffler Body Length: 19". Muffler Overall Length: 25.75"....
      Designed to deliver ultimate performance and pleasing sound qualityMay require a few modifications to install
      $32.14
    • (0 reviews)
      # 89466847
      Dodge Charger 5.2L 1968, HTR Rectangle Collector Gasket (1.13"x1.0") by Taylor Cable®. Type: Rectangle 1" x 1.625". This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $21.54
    • (0 reviews)
      # 89466846
      Dodge Charger 6.3L / 7.2L 1968, HTR Square Collector Gasket (1.5"x1.8") by Taylor Cable®. Type: Square 1.5" x 1.8". This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $21.54
    • (0 reviews)
      # 123352738
      Dodge Charger R/T 7.0L / 7.2L 1968, Steel - Rubber Hanger by Walker®. Material: Steel - Rubber. Inlet Quantity: 1 Inlet. Outlet Quantity: 1 Outlet. With their extensive selection of accessories and hardware for the exhaust system,...
      Makes installation quick and easyOptimal OE-style fit and quality
      $8.87
    • (0 reviews)
      # 19066796
      Dodge Charger 1968, Exhaust Manifold Gasket Set by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the...
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      $12.04 - $14.80
    • (0 reviews)
      # 24104160
      Dodge Charger 1968, Exhaust Manifold Gasket by Victor Reinz®, Use 1 per Car. OEM Standard. Material: Composite. When you’re low on oil, coolant or some other fluid, you may be tempted to just run down to the local auto parts...
      $13.69 - $15.55
    • (0 reviews)
      # 24046059
      Dodge Charger 3.7L without Aluminum Engine 1968, Intake and Exhaust Manifolds Combination Gasket by Victor Reinz®, Use 1 per Car. Water Pump Mounting Gasket. When you’re low on oil, coolant or some other fluid, you may be tempted...
      $15.13
    • (0 reviews)
      # 89466842
      Dodge Charger 6.3L / 7.2L 1968, Graph Flex Square Header Flange Gasket (1.5"x1.8") by Taylor Cable®. Type: Square 1.5" x 1.8". This products is an OEM and Performance company that was built on its founding heritage supported by a...
      Limited Lifetime Replacement WarrantyWithstands Long Term Exposure To Over 2000 Degrees
      $23.04
    • (0 reviews)
      # 89466844
      Dodge Charger 6.3L / 7.2L 1968, XX Carbon™ Square Header Gasket (1.5"x1.42") by Taylor Cable®. Type: Square 1.5" x 1.8". This products is an OEM and Performance company that was built on its founding heritage supported by a...
      Limited Lifetime Replacement WarrantyWithstands Long Term Exposure To Over 2000 Degrees
      $20.92
    • (0 reviews)
      # 19053513
      Dodge Charger 1968, Exhaust Pipe Flange Gasket by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the...
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      $2.02 - $2.88
    • (0 reviews)
      # 24104167
      Dodge Charger 1968, Exhaust Pipe Flange Gasket by Victor Reinz®. With Flange Type. High Performance. Material: Nitroseal. When you’re low on oil, coolant or some other fluid, you may be tempted to just run down to the local auto...
      $2.11 - $2.39
    • (0 reviews)
      # 100089729
      Dodge Charger 1968, Aluminum Header Gasket Set by Flowtech®. Includes 1 Pair Head Flange Gaskets, 1 Pair Exhaust Collector Gaskets. This product is made of high-quality materials to serve you for years to come. Designed using...
      Engineered for a precise, easy fitManufactured of P73 Ferroglass non-asbestos facing material for long life
      $10.04
    • (0 reviews)
      # 91560836
      Universal Steel Chrome Shielded Side Exhaust System by Patriot Exhaust®. Inlet Diameter: 2". Outlet Diameter: 3". Sold as a pair. Give your vehicle that custom look with our classic shielded side exhaust system. Large inlet and...
      Give your vehicle that custom look with our classic shielded side exhaust system with a show quality chrome finishLarge inlet and outlet pipes with low back pressure six-sided louvered core mufflers
      $254.65 - $296.58
    • (0 reviews)
      # 142860767
      Universal Race Readies™ Exhaust Adapter by Flowtech®. Race Readies let you keep your car or truck’s exhaust system closed for the street, but wide open for the strip. And, since the caps are secured by just three wing nuts, you...
      Race Readies twin pack includes free track toolGuaranteed not to leak
      $69.98 - $103.95
    • (0 reviews)
      # 139245596
      Universal Super Competition™ Weld-Up Race Kit by Hooker®. Series: Super Competition™. Hooker Weld-up kits work great for racers who need to build custom headers when a specific fit tuned Super Competition header is not...
      Mandrel Bent 1 pc. PrimariesSS NHRA Contingency ID Header Tags
      $270.95 - $529.95
    • (0 reviews)
      # mpn358949929
      Universal 3 1/2" Chrome Lake Pipes by Patriot Exhaust®, Sold as a Pair. Includes Muffler, Brackets. Side Pipe made from Steel. Chrome Lake Pipes 63". Show quality chrome Lake Pipe 4 kits connect to headers or stock exhaust system...
      The look of an expensive tuned header side pipe at a fraction of the costSide pipes come with built-in six sided louvered cored mufflers which absorb sound not horsepower
      $332.21
    • (2 reviews)
      # 120105855
      Universal 200 Series OBDII Stainless Steel Round Catalytic Converter by Flowmaster®. Catalytic Series: 200 Series. CARB Compliant: No. Converter Configuration: Universal Fit. Converter Body Material: Stainless Steel. Catalytic...
      Exceed all federal emission standardsStainless Steel shells
      $116.53 - $204.95
    • (0 reviews)
      # mpn912861
      Universal 200 Series Stainless Steel Round Catalytic Converter without Air Tube by Flowmaster®. Catalytic Series: 200 Series. CARB Compliant: No. Converter Configuration: Universal Fit. Converter Body Material: Stainless Steel....
      Exceed all federal emission standardsStainless Steel shells
      $187.66
    • (5 reviews)
      # 120105826
      Universal 220 Series Stainless Steel Oval Catalytic Converter by Flowmaster®. Catalytic Series: 220 Series. CARB Compliant: No. Converter Configuration: Universal Fit. Converter Body Material: Stainless Steel. Catalytic Converter...
      Exceed all federal emission standardsStainless Steel shells
      $64.66 - $68.56
    • (5 reviews)
      # 120105830
      Universal 222 Series Stainless Steel Round Catalytic Converter by Flowmaster®. Catalytic Series: 222 Series. CARB Compliant: No. Converter Configuration: Universal Fit. Converter Body Material: Stainless Steel. Catalytic Converter...
      Exceed all federal emission standardsStainless Steel shells
      $67.12
    • (2 reviews)
      # 120105834
      Universal 223 Series Stainless Steel Round Catalytic Converter by Flowmaster®. Catalytic Series: 223 Series. CARB Compliant: No. Converter Configuration: Universal Fit. Converter Body Material: Stainless Steel. Catalytic Converter...
      Exceed all federal emission standardsStainless Steel shells
      $73.86




    Guides & Articles

    • Performance Exhaust Systems
      Here's A "Tip": Exhaust Tips Are An Easy Way To Dress Up Your Tailpipe
      Performance exhaust systems give you improvements in power output, sound levels, and appearance, all in one package. But let's face it: not everyone has the spare change to buy and bolt up one of these kits. So you soldier on with what you have. And that may be a tired-looking exhaust system that is still functional. You've spent all day washing and waxing the vehicle's paint and chrome to perfection, but no degree of elbow grease will make that tailpipe look better.
    • Performance Exhaust Systems
      Are Headers Worth The Performance Improvement?
      Engines have often been compared to air pumps, because the engine that’s most efficient in terms of economy and power is the one that can get air in and out of its cylinders the easiest. That’s why most performance modifications like conical air filters, cold air intake systems, headers, and cat-back exhaust systems are aimed at making the intake and exhaust systems less restrictive. These parts increase the flow of air into the engine and ease the flow of exhaust gas out of the engine. Among these components, headers may be the most difficult to install. In this article, we’ll discuss what headers do, their different types, and how much performance they can add to your car.
    • Performance Exhaust Systems
      Are X-pipes and H-pipes Better Than Straight Pipes on Dual Exhaust Systems?
      You may be wondering why so many aftermarket performance exhaust system manufacturers are offering dual exhaust systems connected by "H-pipe" or "X-pipe" sections. After all, aren't two separate pipes, or so-called "true duals", the best for performance? The answer is no, but to understand why we have to examine how a typical internal combustion engine works.
    • Performance Exhaust Systems
      Power, Sound, Looks | Can I Have It All With a Cat-Back Exhaust System?
      It's an age-old question that many have asked. Will an aftermarket exhaust be worth the expense? While they definitely can be, an important question to ask yourself is do you care more about the deeper sound they’re designed to produce, or the added performance gained from being less restrictive? As car enthusiasts, we’ve become accustomed to associating the sound of a car with its exhaust. After all, doesn’t everyone have a childhood memory or two of a car and the particular sound it made?
    • Bed Accessories
      Pickup Truck Cab And Bed Sizes Are Important When Selecting Accessories
      Americans love to have choices. Buying a dress shirt? Decide solid or stripe, short or long sleeve, cotton or poly blend, button or spread collar, regular fit, slim fit, or big & tall. How about a meal at your favorite steak house? Will it be porterhouse, T-bone, or sirloin? Cooked rare, medium-rare, or medium? With baked, mashed, or French fried potatoes? Thirsty for a fancy cup of coffee? Let's not even get started on options that let you end up with a "grande caramel macchiato with 1% low-fat milk, 2 Splendas, and an extra espresso shot".
    • Replacement Exhaust Parts
      Direct Fit vs. Universal Mufflers
      Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which provides a deeper growl with increased power through freer exhaust flow, you'll see choices between "direct fit" mufflers and "universal" mufflers. In this article, we'll help you understand the differences between these two styles so you can make a more informed purchase.

    Popular Products

    1968 Dodge Charger Performance Exhaust Systems Reviews

    Average rating:  4.5  4.5 - 24 reviews
    5 of 5
    Just What I Needed
    As described and at the right price. Easy, fast delivery. A great buy!
    SPosted by Susan (Smith River, CA) /
    Was this review helpful for you? Yes
    View More
    Related 1968 Dodge Charger Pages
    1968 Dodge Charger Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.