Front Mount Intercooler Kit w/o Air Intake (MMINT-WRX-01SL) by Mishimoto®. This premium product is the best way to go for those looking for the highest quality replacement that offers supreme levels of quality, performance and reliability. Designed to provide a perfect fit for a hassle free installation, this reliable product can help you get you vehicle back on the road faster and easier.
Notes
Do not use with the stock ECU programming
Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle
This kit is rated for approximately 700 whp, or 30 psi of turbo boost
Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler
It is highly recoended that the customer is able to retune the vehicleÍs ECU after installing the intercooler kit
This is a CARB compliant part, legal for use on vehicles built to meet CARB standards and/or registered in California and other states which follow CARB standards (CARB EO: D-759)
Computer Chip/Programmer Included: 44" x 9.00" x 5.5"
Core Height: 3.5"
Finish: Silver
Hot-Side: 2.25"
Intercooler/Throttle Body Coupler I.D.: 2.75"
Intercooler/Throttle Body Coupler Length: 3.25"
Intercooler/Throttle Body Coupler O.D.: 3.00"
Intercooler/Throttle Body Coupler Thickness: 4 mm
Material: aluminum
Max PSI: 30 psi
Max Rear Wheel Hp Rating: 600 whp
Tank Wall Thickness: 3,5
Includes
Bar-And-Plate Intercooler: Yes
Steel Crash Bar: Yes
2 Hot-Side Intercooler Pipes: Yes
2 Cold-Side Intercooler Pipes: Yes
Bpv Flange Adapter: Yes
Resistor Block Relocation Bracket: Yes
2 Lower Intercooler Brackets: Yes
Aluminum Overflow Can: Yes
Turbo To Hot Pipe Coupler: Yes
4 Straight Couplers: Yes
Transition Coupler: Yes
Bpv Recirculation Hose: Yes
Pcv Hose: Yes
12 T-Bolt Clamps: Yes
1.5" Worm-Gear Clamp: Yes
Bypass Valve Gasket: Yes
Black Nylon Hose Fitting and Black Nylon Tee Hose Fitting 3/4" Inner Diameter: Yes
12" Of Thermal Wrap: Yes
Features
Intercooler design optimized for maximum flow, and smooth cast end tanks allow the best possible airflow in and out of the intercooler
Optimal core design for maximum cooling efficiency with minimal pressure drop
Flow rated to approximately 600 whp/30 psi of turbo boost (See Tech Specs below)
Also fits right-hand drive models
Works with stock bypass valve or aftermarket blow-off valve
Mishimoto® Automotive is the leading manufacturer of aftermarket performance cooling products. The company was established in 2003 with the goal of providing customers with superior cooling system upgrades suited for track cars and daily drivers alike. The staff of automotive enthusiasts works hard to consistently produce the highest-quality products and provide exceptional customer service.
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Mishimoto® MMINT-WRX-01SL - Front Mount Intercooler Kit w/o Air Intake
I've had this intercooler on my 2006 WRX for a little more than a year now. No leaks or fading of the black paint. I would buy it again just based on the fact that is so much easier to remove and install than the stock unit.
Posted by Customer / March 25, 20212002 Subaru WRX
Questions and Answers
(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!