Karlyn STI Parts

The Art of German Engineering

Karlyn STI has been making products since 1971, and over 40 years of experience is very difficult to ignore when you are trying to decide which products to add to your vehicle. With a range of different products, Karlyn STI can help your vehicle become the kind of vehicle you always dreamed of having. Sure, you chose it because it was the best on the market for the way you drive, but with Karlyn STI, it can become even more fun.

Featured Products

The suspension parts offered by Karlyn STI include ball joints which are relatively easy to fit but very easy to enjoy. The standard ball joints on your vehicle will degrade over time since they are constantly under so much pressure, but this is an opportunity to improve the way your vehicle handles and rides with Karlyn STI ball joints. They can make you feel like the vehicle is brand new again every time you barely notice a bump in the road.

Karlyn STI also offers a wide range of spark plug wire sets and ignition cables, which are the parts that send the spark to your individual plugs where they turn fuel and air into raw power. With the right set of these installed, you can stop worrying about the degradation of the standard ones, and this degradation can become a serious problem causing all sorts of symptoms from slightly rough running to a complete inability to go anywhere. However, after a few minutes of installing your new cables, you can get back on the road.

Ignition coils wearing the Karlyn STI brand are also available, so you can have your entire ignition system running the way it did when it was brand new. They work by creating the spark that turns the fuel into power, and when you have a new one installed you can stop worrying about symptoms like missing, rough idling or difficulty starting the engine. When you have a new one working properly you can even enjoy better fuel efficiency, which allows you to spend less money on fuel every week so you have more money for more fun things.

Karlyn STI’s years in the business are an example of the quality of part they provide, because no company is going to last for long if the parts it provides are not up to the demands of customers. When you install a Karlyn STI part on your vehicle, you will immediately know the difference, and because of the quality you will get to enjoy this difference for a longer time than you did with standard parts. When you buy a Karlyn STI part, you are not just buying the quality materials, but also the years of knowledge and experience.

Of course, when you do buy a part as good as these, you want to make sure you are getting value for money, and this is why you find yourself at CARiD.com. We have the parts your vehicle deserves at prices your budget demands, so you can buy everything you are looking for and still have some money left over for parts you did not think you could add to the list. There is nothing quite like driving a vehicle that seems as though it was designed for you while having some money to spare.

Karlyn STI Reviews
Average rating:55 - 11 votes
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
Great Wires
2005 Dodge Neon
| Posted by | (Hereford, TX)

What can I say, these are very precise made wires and we were very pleased with the fit, look, and performance of this wire set.

Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
Coil
2009 Chrysler PT Cruiser
| Posted by | (Hereford, TX)

Very well made product. Fits exactly right. So far performs excellently.

Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
Karlyn STI is Amazing
2004 Mitsubishi Eclipse
| Posted by | (Valley Stream, NY)

A noticeable difference when I put the STI direct ignition coil and the plugs. The car runs better than it did before.

Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
Wires
1998 Land Rover Range Rover
| Posted by | (Pasadena, CA)

I look for better performance, and these wires really look good under the hood.

Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
Delivery
2006 Mitsubishi Lancer
| Posted by | (La Jolla, CA)

When I tracked the part, it took CARiD 3 days to finally process the order and ship it.

1 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE8
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
Works good
1974 Ford Mustang
| Posted by | (Labadieville, LA)

I've bought a distributor rotor for my Ford Mustang. My car isn't new and some parts needs a replace with time. I was pleased with good quality of product and easy fit. good thing, i will recommend it

3 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
It works good, thanks!
2002 Land Rover Range Rover
| Posted by | (Powell, WY)

Easy installation, good quality and perfect fit without any issues! I've bought a spark plug wire set and I'm really enjoyed with this thing. Usually the spark plug wires aren't those thing that are often get broken, but i've got the fortune! One day my car began run rough and as mechanic said I had to replace wires.

2 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
4.5(4.5)
APPEARANCE8
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY8
Karlyn Ignition Coil
2007 Mazda 3
| Posted by | (Calais, ME)

The highest quality with a very competitive price.

2 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
Great thing!
2012 GMC Savana
| Posted by | (Knob Noster, MO)

Hey, that's the best solution for my engine! I've bought a new glowplug by Karlyn 'cause mine was broken after accident. I'm really satisfied with that thing. It works without any hitches!

1 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
Very High Quality Tool, a Big Surprise!
| Posted by | (Clearfield, UT)

I was amazed to get a fully machined high-quality tool for a bargain price. Most tools of decent quality are very expensive. Only worth the money to a true professional needing them every day. If you have a VR6 or other hard to reach plugs, this tool is top quality and fully machined steel. No plastic and NO sheet metal. Thanks for a great deal on a quality tool.

Was this review helpful for you? YesNo
Share this review:
Show Next 10