Name: Fabspeed® - Primary Sport Cat Downpipes
Brand: Fabspeed
SKU: mpn4817151753
Price: 3775.95 USD
Availability: OutOfStock

Vehicle Fitment

Make	Model	Year
Land Rover	Range Rover	2010-2022

Product Details

Primary Sport Cat Downpipes by Fabspeed®. Sport Cat Downpipes utilize larger diameter, CNC mandrel bent stainless steel tubing along with HJS German imported 200-cell catalytic converters. Control the volume with your right foot: experience a great tone when you lay into the throttle while getting a drone free interior cruising around town. Range Rover V8 highflow catalytic converters FLOW 90+% of a straight pipe with a Guaranteed NO Check Engine Light no tune required. Sport cats/ high flow cats the foundation for real quantifiable power gains. Eliminate the heavy and restrictive factory catalytic converters with straight-pipe, high flowing stainless steel downpipes for maximum power and an exhilarating sound. Utilize high flow, tri-metallic 200 cell HJS catalysts as a premium solution to meeting emissions requirements while increasing horsepower. Fabspeed is the 2nd largest distributor of HJS catalysts and Fabspeed have years of experience crafting exhaust solutions.

Features

Maximum Horsepower and Torque gain of 50.39 whp and 57.49 ft-lbs when combined with the Fabspeed XperTune Performance Software
Increased throttle response and noticeable power gains
Optimized for maximum performance with NO catalyst generated check engine light, guaranteed
Get an aggressive rumble when you accelerate without any droning off the throttle.
Includes high flowing HJS German imported 200-cell catalytic converters for improved flow and exhaust sound
Constructed from high-quality 14-16ga C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
Saves 7lbs (3.2kg) versus the factory downpipes
Simple bolt-on installation; no cutting or welding required. Fast simple direct SWAP/Exchange for the 4 extremely restrictive stock OEM cats
All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
Pair with our Range Rover Supercharged Fabspeed ECU Sport Tune for even more tested and verified power
Fabspeed was the Worlds Very 1st company to design, engineer and Dyno develop ultra high flow cats for the new aluminum Range Rover Sport V8 and SVR cars

For over 20 years, Fabspeed® has been engineering and manufacturing the world's finest stainless steel high-performance exhaust systems and components, air intake products, ECU tuning, and more, specifically-tailored for high-end sports cars and exotics. From Porsche to McLaren, the Fabspeed expertise is unmatched and it shows in everything that the manufacturer creates. Their dyno-proven performance products provide an exhilarating driving experience and are backed by a limited lifetime warranty. Being dedicated to providing maximum performance and true care and concern for the development of their products, Fabspeed strives to be a force of innovation within the industry.

Brand:

Fabspeed

Part Number:

FS.RNG.RRSCV8.SCDP

Alternate MPN:

FSRNGRRSCV8SCDP

Warranty

Limited Lifetime Warranty & Conditions

Fabspeed Motorsport USA™ products (excluding catalytic converters) are backed by a Limited Lifetime Warranty against defects in materials and workmanship which is extended to the original purchaser of the product(s). The catalytic converters used in Fabspeed Motorsport products are covered under warranty for 24 months from the date of purchase. Any catalytic converter issue(s) experienced outside of the established 24-month timeframe is the responsibility of the original purchaser.

Disclaimer: There is no warranty of sound quality or volume, as these are completely subjective characteristics.

Upon verification of warranty coverage, Fabspeed® will, at its sole option, repair or replace the defective product without charge. This is the only remedy the Consumer has for any loss or damage, however arising, due to nonconformity in or defect of the product.

Fabspeed Motorsport reserves the right to deny warrant service if it can be proved that the product failed or is failing due to accidental damage, external impact, abuse or misuse, track/race use, shipment, handling, storage, worn or faulty engine mounts and/or exhaust mounts, faulty location or installation, excessive vibration, internal explosion or backfire, maintenance in a manner not conforming to the Fabspeed® instructions, failure of a third party component, or the installation of the part(s) to a vehicle for which it was not intended.
Exhaust mounts and engine mounts must be checked at least every 12 months by a qualified technician and replaced as necessary. Valid evidence of this regular service may be required in the case of a claim. Fabspeed reserves the right to deny warranty replacement or repair if it is proved that a faulty engine or exhaust mount was responsible for the issue in-question. Attempted repair of a faulty Fabspeed product by anyone other than Fabspeed Motorsport or a Fabspeed-approved agent will void this warranty. .

Fabspeed offers a limited lifetime warranty on all of their performance products*. This warranty is offered to the original purchaser and protects against defects in materials and construction.

*Exclusions:
Catalytic converters: 2-year limited warranty (details below);
Exhaust tip finish: 1-year limited warranty;
Exhaust valves & (related electronics): 1-year limited warranty;

Fabspeed Motorsport Catalytic Converter Warranty:
Fabspeed products containing catalytic converters are protected by a 2-Year limited warranty against failure or defects in material and construction. This warranty does not apply if the product(s) has been installed on a vehicle that has been run with leaded race fuel or fuel additives.

In order for Fabspeed to replace a catalytic converter under the warranty, the following conditions and requirements must ALL be met:
1. Catalysts must not show any physical damage or signs of abuse. Signs of abuse include, but are not limited to, motorsport or on-track use, leaded fuel, fuel additives, etc.
2. Catalysts must be no more than two years in age from the original purchase date.
3. There are no visible exhaust leaks anywhere in the exhaust system upstream of the catalysts.
4. Two ECU printouts showing catalyst inefficiency faults. After the first printout the ECU fault memory is cleared. If the fault returns, a second printout should be made and submitted for warranty approval. Printouts must include operating conditions and vehicle hours.
5. No other faults which will alter the OEM or Fabspeed ECU tune air/fuel calibration should be present on the printouts for catalytic inefficiency (for example: codes for fuel trim, O2 sensors, MAF sensor, etc.)
6. A graph of the oxygen sensors before and after the catalyst must be supplied. This graph should show the oxygen sensors in operation on a fully warm vehicle in closed loop operation.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Fabspeed® - Primary Sport Cat Downpipes

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!