| Make | Model | Year |
|---|---|---|
| Chevy | CK Pickup | 1988-1998 |
| Silverado 1500 | 1999-2006 | |
| Silverado 2500 | 2001-2010 | |
| Silverado 3500 | 2001-2010 | |
| Dodge | Ram | 2003-2018 |
| Ford | F-150 | 2004-2017 |
| F-250 | 1999-2019 | |
| F-350 | 1999-2019 | |
| GMC | CK Pickup | 1988-1999 |
| Sierra 1500 | 2000-2006 | |
| Sierra 2500 | 2001-2010 | |
| Sierra 3500 | 2001-2010 | |
| Ram | 2500 | 2011-2013 |
| 3500 | 2011-2018 | |
| Toyota | Tundra | 2007-2016 |
USED RECOIL Rear Traction Bar Kit for 0"-6" Lifted Vehicles by BDS Suspension®. Quantity: Sold as a Kit. BDS Suspension introduces a revolutionary spring loaded traction bar system engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. These next generation RECOIL traction bars offer you the freedom to tune the spring compression for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.
These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16" wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut RECOIL Traction Bars and award to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction.
At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. Both ends are greaseable and serviceable
RECOIL Brackets
Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install using a set of u-bolts. The traction bars and mounting brackets use a durable gloss black powdercoat finish.
Adjustable Axle Wrap Control
These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring compression, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go.
BDS Suspension® was founded in 1996 by automotive enthusiasts who felt it was past time to create a suspension company that truly had the best interest of the off-road customer as its foundation. They set out to create a suspension company that would provide best-in-class aftermarket suspension parts on the market. Today, BDS Suspension designs and manufactures top-notch parts and accessories that give you peace of mind that they fit and perform as close to original equipment as possible. Purchasing BDS Suspension products, you are getting the most for your money.