Ford Mustang II, Wheel Spacers by Baer®, 1 Pair. Bolt Circle: 6 x 5.5". 0.500" Thickness When you need to position your wheels further outward to clear brake components or to prevent larger tires from rubbing, Baer wheel spacers provide an OEM-quality fit without looseness or vibrations. This spacer features a 4-bolt pattern that will fit lugs with bolt center diameters of 3.94, 4.25, or 4.5 inches. The spacers are cut, machined, and drilled from one piece of aluminum, not cast from a mold - giving them higher rigidity and greater resistance to warping or cracking.
- 4-bolt pattern
- Spacer pieces are cut from one piece of billet aluminum
- Fully machined to extremely tight tolerances for a precise, OEM-quality fit
- Installs around lug bolts between the flat edge of brake disc and wheel
- Allows more outboard placement of wheels in the event more clearance is needed for larger-than-stock brake calipers
- Increases the track width of your vehicle for more stable handling
- Proudly manufactured in the United States
If you've installed plus size tires on your vehicle, you may be realizing too late that even though the overall diameter of your new tires matches your old ones, wider width is causing them to rub against the inside of your wheel well liners. When this is happening, your vehicle's performance is compromised in the areas of steering and braking - two things that greatly reduce maneuverability and safety. Plus, normal suspension travel that used to be taken for granted can now cause damage to your tires and any other important suspension components they come in contact with. And if you are finding larger brake calipers you installed do not clear the curved spokes of bigger aftermarket wheels as expected, a solution exists.
Baer offers the one-fourth inch Wheel Spacers to correct smaller fitment issues, and the 4-bolt pattern of this set will fit lugs with bolt center diameters of 3.94, 4.25, or 4.5 inches. Unlike inferior spacers from competitors that are built by pouring metal into molds that may not be shaped 100% correctly, Baer wheel spacers are laser cut and milled from one single piece of aluminum. Because the metal is not heated up and poured, it retains its original tensile strength - giving these spacers the rigidity needed to prevent warping that occurs under high temperatures. Baer spacers will fit right when you put them on, leaving your wheels free from shimmies and vibrations that plague most imperfectly shaped spacers. And because of their durability, they'll continue to fit right after miles and miles of punishing use without putting undue stress on lug bolts to cause breakage.
Founded in 1986 in Phoenix, Arizona, Baer Brakes began with the goal of producing only superior brake components and kits for the driver who appreciates high levels of performance on the street and on the track. Company leaders have always been relentless in their pursuit of making better products through innovation and quality control measures that result in defect-free manufacturing. Whether you're looking to upgrade factory brakes with OEM size components, larger calipers and rotors, or convert a classic with drum brakes to discs, Baer offers a wide selection of brake packages for every driving purpose and budget.