Takeda® - Momentum® Black Cold Air Intake System

The Momentum Sealed Stage 2 Cold Air Intake Kit features an innovative 1-piece rotomolded air box/air scoop that houses the air filter and shields it from engine heat, and also takes in cool air from the front of the vehicle. The air filter is a special Pro DRY S or Pro 5R with an aerodynamic "rounded" top, to reduce air resistance and direct airflow smoothly into the intake tract. A patent pending filter-to-air box interface ensures a flawless seal.

The Pro DRY S air filter combines high airflow and filtration efficiency with the convenience of oil-free maintenance. It contains 2 layers of randomly porous synthetic fabric, which allows approximately twice the airflow when compared to a typical stock air filter. The increased airflow results in more horsepower and torque, better throttle response and more miles per gallon. But this improved airflow and performance hasn't been gained at the expense of engine protection: the Pro DRY S has an excellent 99.2% filtration efficiency rating.

The Pro 5R air filter was designed to provide the maximum airflow possible, to enable your engine to make the most horsepower and torque. But this wasn't achieved by ignoring engine protection. The Pro 5R outperforms most other cotton gauze air filters with a 98.6% efficiency rating. The increased airflow and high filtration capability are the result of the Pro 5R's construction. It's made of 5 layers of progressively finer medical-grade cotton gauze. As the progressively finer layers of gauze are stacked in the Pro 5R, the randomness of the openings increase, minimizing spaces with no filter media. Dust accumulates on multiple layers, increasing overall dust holding capacity and filtration efficiency.

The pleats in both filters are evenly spaced for greater dust holding capacity and the tips are rounded for better airflow. They're also 30% deeper than comparable aftermarket air filters for longer service intervals and greater dust holding capacity.

A specially developed 3-angle velocity stack smoothes the airflow transition from the air filter to the mandrel-bent aluminum intake tube. Unlike factory air intake tubes that have sound baffles and make awkward bends, the Takeda intake tube is designed to give the engine less restrictive breathing, incorporating larger diameters and smooth bends. The end result is airflow that is increased at least 30% over the stock system, with significant gains in horsepower and torque.

The Momentum Sealed Stage 2 Cold Air Intake Kit comes complete with all necessary hardware, including detailed instructions. This system is backed by a 2-year limited warranty.