2012 Toyota Sienna Performance Suspension

Change Vehicle
1 - 60 of 155 results
show:
sort by:
    • (0 reviews)
      # 77956872
      Toyota Sienna Base / LE / Limited / SE / XLE 2012, Air Helper Spring Kit by Firestone®. Mount inside an existing open coil spring suspension. These air springs provide adjustable spring rates far superior to the standard coil...
      Control the air pressure in the air helper springs for varying loads and road conditionsSpring performance can be altered as easily as inflating a tire
      $97.48 - $863.43
    • (0 reviews)
      # 14259133
      Toyota Sienna Base / LE / Limited / SE / XLE 2012, Rear SES Rubber Helper Spring Kit by Timbren®. Quantity: 2 per Pack. Includes: 2 Aeon® Rubber Springs, Vehicle-Specific Brackets, All Hardware. Material: Rubber. Capacity: 2400...
      Improves Ride and HandlingEliminates Trailer Sway and Roll
      $214.67
    • (0 reviews)
      # 169152147
      Toyota Sienna With Short Wheelbase 1ARFE Engine / 2GRFE Engine 2012, OME™ Rear Lifted Coil Springs with 0"-1" Rear Lift Height by ARB®. Quantity: 2 per Pack. Combine this with punishing off road conditions, and the limitations of...
      Springs are formed on precision mandrelsScragging before and after shot peening to prevent sagging
      $167.20
    • (0 reviews)
      # 185721052
      Toyota Sienna 2012, Ti 2000 Down™ Front and Rear Lowering Coil Spring Kit by RS-R®. Quantity: 4 per Pack. The Ti2000 Down Suspension provides a lowered stance and improved handling to fulfill your needs to lower your car and...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $459.00
    • (0 reviews)
      # 206749639
      Toyota Sienna 2012, Rear Suspension Air Helper Spring by SuperSprings®. Pair. Coil SumoSprings fit between the rungs on front and rear coils springs to improve suspension performance and provide enhanced driver control. Front...
      Applications for both front and rear coil springsImprove load carrying ability
      $156.60
    • (0 reviews)
      # 88877555
      Toyota Sienna Base / LE / Limited / SE / XLE 2012, Air-Command™ Suspension Air Compressor by Firestone®. Firestone manufactures and provides air suspension products for wide variety of vehicles to provide you with a better ride...
      Tested to outperform all comparable products on the marketMade from premium materials to endure years of abuse
      $59.16 - $275.91
    • (0 reviews)
      # 13330232
      Toyota Sienna Base / LE / Limited / SE / XLE 2012, Air-Rite™ Air Command Compressor System by Firestone®. Provide instant control of the air helper springs from within the vehicle. Air-Rite™ systems allow quick inflation and...
      Instant adjustability of your air helper springsIncreased life of the air helper springs
      $204.06 - $863.43
    • (0 reviews)
      # 139127934
      Toyota Sienna 2012, Air Springs by Air Lift®. Set of two adjustable secondary air helper springs designed to mount inside your existing coil springs and add up to 1,000 pounds of leveling capacity for heavy loads. Adds ride comfort...
      Set of two springs support designed to fit within the center of coil springsSized for your make and model specifically
      $102.85 - $1,450.00
    • (0 reviews)
      # 9823529
      Toyota Sienna 2012, Load Controller by Air Lift®. LoadController systems are air compressors that mount permanently on the frame of your vehicle to give you spring inflation pressure wherever you go. Adjustment of your springs is...
      Dual-path design compressors allow left- or right-side springs on the same axle to be controlled independently of each otherHeavy-duty strength compressors are recommended for daily or commercial use, run quieter, and provide better filtration
      $231.75 - $427.45
    • (1 review)
      # 9809643
      Toyota Sienna 2012, Wireless Control by Air Lift®. These kits include a compact wireless remote control and all the equipment you need to adjust the pressure in two air springs on the same axle. Wireless remote control features 3...
      Equal Air Spring Inflation kit contains a standard air compressor that adjusts left and right springs together at the same time to the same pressureSeparate Air Spring Inflation kit contains a heavy duty air compressor with separate lines that allows individual adjustment of left and right springs
      $378.53 - $524.99
    • (0 reviews)
      # 71923101
      Toyota Sienna 2012, OESpectrum™ Front Strut by Monroe®. Quantity: 1 per Pack. Without Dust Shield. Without Extended Bumper Stop. Without Extended Hydraulic Lockout. Gas Charged Unit - Strut Rod Will Extend Automatically. These...
      Provide unprecedented handling precision and controlNitrogen gas charged
      $76.21
    • (0 reviews)
      # 41958144
      Toyota Sienna 2012, Excel-G™ Shock and Strut by KYB®. Quantity: 1 per Pack. Restore your vehicle's original performance for normal driving conditions with the Excel-G twin-tube gas hydraulic shocks and struts that offer...
      Designed to restore original handling and controlCalibrated to compensate for age and miles driven
      $40.28 - $63.96
    • (0 reviews)
      # 89193464
      Toyota Sienna 2012, Super Touring™ Shocks and Struts by Sachs®. SACHS shock absorbers distinguish themselves through original equipment quality and innovative technology. They provide performance and dynamics, ensuring perfect...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $50.17 - $85.06
    • (0 reviews)
      # 70107845
      Toyota Sienna 2012, Front Lower Control Arm by Mevotech®. Quantity: 1 per Pack. Warranty: Lifetime or 60,000 Miles. Designed to increase friction amount between the tire and road surface for an effective steering ability and better...
      Eliminates uneven steering, squeaking noise, and excessive tire wearAllocates vehicle body weight to the tire for vehicle stability and alignment
      $69.89
    • (0 reviews)
      # 88045089
      Toyota Sienna 2012, Control Arm and Ball Joint Assembly by Beck Arnley®. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to...
      OE quality products from top original equipmentTop quality materials
      $71.76 - $81.88
    • (0 reviews)
      # 85018318
      Toyota Sienna 2012, Non-Adjustable Front Lower Control Arm and Ball Joint by Dorman®. Quantity: 1 per Pack. Material: Steel. Ball Joint Stud Type: Threaded. Attachment Type: Bolt On. With Bushing. Packaging Type: Box. With Pre...
      Ball joints and bushings included for a complete installation, saving time and labor (where applicable)Direct replacement for a trouble-free installation
      $111.04
    • (0 reviews)
      # 85626095
      Toyota Sienna 2012, Front Lower Control Arm by Genuine®. Quantity: 1 per Pack. With Bushing. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $229.31
    • (0 reviews)
      # 83333008
      Toyota Sienna 2012, R-Series™ Front Lower Control Arm and Ball Joint Assembly by MOOG®. 1 per Pack. Replace your worn or damaged bushings with stronger and longer-lasting bushings from MOOG that effectively absorb substantial...
      Restore handling and enable proper alignmentReduce noise
      $75.55
    • (0 reviews)
      # 36257790
      Toyota Sienna 2012, Front Lower Ball Joint by Beck Arnley®. Quantity: 1 per Pack. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and...
      OE quality products from top original equipmentTop quality materials
      $34.45
    • (0 reviews)
      # 38439013
      Toyota Sienna 2012, Front Lower Ball Joint by MOOG®. Quantity: 1 per Pack. MOOG ball joints are the preferred choice of many professional technicians and incorporate proven design and advanced engineering features to ensure...
      Engineered to retain socket torque and smooth articulation over the life of the part, to maintain tight steering feelExclusive powdered-metal bearing design allows grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
      $62.09
    • (0 reviews)
      # 64840920
      Toyota Sienna 2012, Premium™ Front Lower Ball Joint by Centric®. Quantity: 1 per Pack. The company has one of the industry’s best programs for tracking and cataloging original equipment, and devising quality aftermarket and OE...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $24.94
    • (0 reviews)
      # 21703498
      Toyota Sienna 2012, Alignment Camber Kit by MOOG®. At Front Lower Strut Mount. 1 per Pack. With 17mm Bolts. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable...
      Designed to make steering and suspension repairs easyDirect fit
      $14.83 - $15.70
    • (0 reviews)
      # 19265544
      Toyota Sienna 2012, Front Sway Bar Link Kit by Mevotech®. Quantity: 2 per Vehicle. Warranty: Lifetime or 60,000 Miles. Stabilizer links transfer weight between the left and right sides of a vehicle. When a vehicle makes a turn,...
      Built to match or go beyond OE standardsDirect replacement
      $35.07
    • (0 reviews)
      # 88034925
      Toyota Sienna 2012, Front Sway Bar Link by Beck Arnley®. End Link. For one hundred years, Beck/Arnley has been providing premium OE quality parts for vehicles. Beginning with motorcycle parts in 1914 and transitioning to import...
      OE quality products from top original equipmentTop quality materials
      $41.20
    • (0 reviews)
      # 44705045
      Toyota Sienna 2012, Front Sway Bar Link Nut by Genuine®. Quantity: 1 per Pack. Size: 12mm x 1.25mm. Flange Nut. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $3.01
    • (0 reviews)
      # 21649266
      Toyota Sienna 2012, Front Stabilizer Bar Link by MOOG®. 1 per Pack. If you hear noise and are experiencing excessive body roll, you may be in need of sway bar links. This kit is designed to simplify installation and built with...
      Socket style links feature superior metal bearingsGreasable design for longer life and smooth operation on socket style links
      $45.77
    • (0 reviews)
      # 195001798
      Toyota Sienna 2012, Front Strut Mount by Genuine®. Quantity: 2 per Pack. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $130.93
    • (0 reviews)
      # 8668571
      Toyota Sienna 2012, Front Strut Bearing by MTC®. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but before you waste your time...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $35.83
    • (0 reviews)
      # 64264739
      Toyota Sienna FWD (Front Wheel Drive) With Mobility Auto Access Package 2012, Front Strut Mount by Sachs®. 2 Per Vechicle. Includes: Strut Mount And Bearing. The suspension strut mount is the upper mounting point of the shock...
      No effort necessaryCan be remote controlled
      $62.72
    • (0 reviews)
      # 164305494
      Toyota Sienna 2012, Front EZ Cam XR Alignment Cam Bolt Kit by Mevotech®. Quantity: 2 per Pack. Warranty: Lifetime or 60,000 Miles. Diameter: 0.669" (17 mm). Don’t just repair or replace worn components – bolster them with...
      Built to match or go beyond OE standardsDirect replacement
      $27.57
    • (0 reviews)
      # 77964329
      Toyota Sienna 2012, Front Alignment Camber Bolt Assortment by MOOG®. 1 per Pack. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation even under extreme...
      OE quality parts from top original equipment and aftermarket manufacturersThe finest quality at a great price
      $266.58
    • (0 reviews)
      # 170563941
      Toyota Sienna 2012, Full Contact Dual Angle Rear Alignment Shim by MOOG®. 1 per Pack. Upgrade your vehicle to MOOG and experience a safe and comfortable ride. The parts are made tough to ensure reliable operation even under extreme...
      Designed to make steering and suspension repairs easyDirect fit
      $10.54
    • (0 reviews)
      # 70001358
      Toyota Sienna 2012, Professional™ Front Alignment Camber Bolt Kit by ACDelco®. Comprehensive kits make replacing worn parts efficient and cost effective. Chassis bushing kits and alignment products were precision-designed to...
      Wide range of OE-like parts to meet a wide range of applications.Standard and Extended Range (for lowered vehicles) front control arm anchors.
      $15.58 - $15.90
    • (0 reviews)
      # 42723552
      Toyota Sienna FWD (Front Wheel Drive) 2012, Front Bushing Kit by Dorman®. Black. With Installation Hardware. Dorman’s Suspension Subframe Bushing Kit includes all the components needed for a complete repair. Quickly and easily...
      Comes with all necessary mounting hardware (where applicable)High quality rubber construction prevents bushings from compressing, cracking, and separating
      $48.56
    • (0 reviews)
      # 201547122
      Toyota Sienna 2012, Front Ball Joint by Sankei 555®. Quantity: 1 per Pack. Does your luxury car ride like an old buckboard wagon? Is your pickup still bouncing long after the bump? If so your suspension is in need of repair, but...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $61.26 - $61.56
    • (0 reviews)
      # 202599553
      Toyota Sienna 2012, Premium™ Front Alignment Camber Bolt Kit by Centric®. Adjustable From +/- 1 to +/- 1.75 Degree of Camber. With 17mm (0.663") Bolt. The company has one of the industry’s best programs for tracking and...
      Intended for a comfortable driving experienceExpertly crafted from premium materials
      $23.12
    • (0 reviews)
      # 151405659
      Universal, 5165 Series Driver or Passenger Side Monotube Smooth Body Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: Eye 5/8". Without Boot. Diameter: 1.81". Get the benefits of a remote...
      BILSTEIN’s industry leading monotube designRemote reservoir dramatically increases shock oil capacity for even greater heat dissipation and damping sensitivity
      $184.99 - $211.09
    • (0 reviews)
      # 151405660
      Universal, 7100 Classic Series Driver or Passenger Side Monotube Smooth Body Shock Absorber by Bilstein®. Quantity: 1 per Pack. Without Reservoir. Diameter: 1.81". The 7100 Classic Series are the most successful shock absorbers in...
      Monotube gas pressure constructionThreaded Body Lengths to 10" Travel
      $129.54 - $176.35
    • (0 reviews)
      # 151405661
      Universal, 7100 Classic Series Driver or Passenger Side Monotube Threaded Body Coilover Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without...
      Monotube gas pressure constructionSelf-Adjusting Deflecting Disc Valving
      $202.42 - $315.36
    • (0 reviews)
      # 151405662
      Universal, 7100 Series Driver or Passenger Side Monotube Smooth Body Coilover Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Electroless Nickel with Clear Powdercoat. Lower Mounting: 1/2" Heim. Without Boot. Diameter:...
      Monotube gas pressure constructionSelf-Adjusting Deflecting Disc Valving
      $169.94 - $279.34
    • (0 reviews)
      # 151405663
      Universal, 8125 Series Driver or Passenger Side Monotube Threaded Body Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: 5/8" heim with 1/2" heim spacers (1.5" width spacing). Upper Mounting:...
      Threaded body with dual rate coilover hardwareMonotube design for fade-free performance
      $396.13 - $521.13
    • (0 reviews)
      # 151405664
      Universal, 9100 Rock Crawler Series Driver or Passenger Side Monotube Threaded Body Coilover Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Electroless Nickel. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. With...
      Monotube gas pressure constructionNickel plated 2" diameter threaded body
      $347.43 - $357.49
    • (0 reviews)
      # 151405665
      Universal, 9100 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Electroless Nickel. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. With Reservoir. Without Boot....
      Monotube gas pressure constructionValving can be adjusted internally for rebound and compression.
      $366.93 - $843.81
    • (0 reviews)
      # 142045294
      Universal, 9200 Series Driver or Passenger Side Monotube Bypass 4-Tube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: Eye 5/8". Upper Mounting: Eye 5/8". With Reservoir. Without Boot....
      4-tube, position sensitive with adjustable rebound and compressionMultiple stroke lengths available ranging from 8” to 18”
      $1,154.38 - $1,159.88
    • (0 reviews)
      # 151405669
      Universal, 9300 Black Hawk Series Driver or Passenger Side Monotube Bypass 4-Tube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Clear Anodized. Lower Mounting: 3/4" Heim. Upper Mounting: 3/4" Heim. With Reservoir....
      Monotube internal designOne piece 6061 extruded aluminum body with hard anodized finish
      $2,318.63 - $2,572.73
    • (0 reviews)
      # 151405671
      Universal, AS2 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Clear Anodized. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81". Combining...
      46mm lightweight extruded aluminum body maintains tighter tolerances for superior performanceFine thread body provides precise adjustments in coilover applications (coilover kit sold separately)
      $254.09 - $555.50
    • (0 reviews)
      # 142045296
      Universal, BGT Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Clear Anodized. Lower Mounting: Eye 12.7 mm. Upper Mounting: Eye 12.7 mm. Without Boot. Compression/Rebound:...
      Monotube gas pressure constructionAvailable with or without base valve
      $336.59 - $348.75
    • (0 reviews)
      # 151405672
      Universal, CA4 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Polished Aluminum. Lower Mounting: Eye 15.9 mm. Upper Mounting: Eye 15.9 mm. Without Boot. Diameter: 1.81". Bilstein...
      Monotube gas pressure construction46mm working piston
      $241.31 - $293.03
    • (0 reviews)
      # 151405673
      Universal, CA5 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Polished Aluminum. Lower Mounting: 15.9 mm Heim. Upper Mounting: 15.9 mm Heim. Without Boot. Diameter: 1.81". The...
      Monotube gas pressure construction46mm working piston
      $271.63 - $281.29
    • (0 reviews)
      # 151405674
      Universal, G Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Yellow Paint. Lower Mounting: Eye 12.7 mm. Upper Mounting: Eye 12.7 mm. Without Boot. Diameter: 1.42". Bilstein G...
      Modified Lites and Dwarf CarsThe 36mm monotube steel body design
      $114.50 - $118.13
    • (0 reviews)
      # 151405675
      Universal, M Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Yellow Paint. Compressed Length: 13.90". Extended Length: 21.89". Lower Mounting: Eye 12.7 mm. Upper Mounting: Eye...
      Designed for Stock Cars, IMCA/UMP Modified, Midgets, Mini-Sprints, Modified Lites and Dwarf CarsThe 36mm monotube steel body design
      $123.95 - $127.95
    • (0 reviews)
      # 142045297
      Universal, SA4 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Polished Aluminum. Compressed Length: 9.25". Extended Length: 11.94". Lower Mounting: Eye 15.9 mm. Upper Mounting:...
      Monotube gas pressure construction46mm working piston
      $208.85
    • (0 reviews)
      # 151405688
      Universal, SLS-M Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Compressed Length: 15.00". Extended Length: 23.52". Without Boot. Diameter: 1.81". Sealed steel body shock, converts to...
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $152.92
    • (0 reviews)
      # 151405687
      Universal, SLS Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: Eye 12.7 mm. Upper Mounting: Eye 12.7 mm. Without Boot. Diameter: 1.81". Sealed steel...
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $152.92
    • (0 reviews)
      # 151405680
      Universal, SL Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Without Boot. Diameter: 1.81". Sealed steel body shock, converts to coilover applications.
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $120.80 - $178.93
    • (0 reviews)
      # 151405690
      Universal, SN2 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81". Designed for...
      46mm extruded modular steel body maintains tighter tolerances for superior performanceBody design allows for standard or coilover application
      $196.26
    • (0 reviews)
      # 151405692
      Universal, SNS2 Series Monotube Shock Absorber by Bilstein®. Finish: Zinc Plated. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81". Designed for, but is not limited to, Modifieds, Late Models and...
      Monotube internal designRebuildable; shock can be assembled and disassembled for rapid repair or valving change
      $196.72
    • (0 reviews)
      # 151405693
      Universal, SS4 Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Chrome Plated. Lower Mounting: Eye 15.9 mm. Upper Mounting: Eye 11.2 mm. Without Boot. Compression/Rebound: 695/1310...
      Monotube gas pressure constructionDeflective disc valving and dropped solid axle specific mounts
      $119.49 - $152.10
    • (0 reviews)
      # 151405694
      Universal, SZ Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Zinc Plated. Without Boot. Diameter: 1.81". Sealed steel body shock, converts to coilover applications.
      Monotube gas pressure constructionPlated for durability and rapid heat dissipation
      $120.80 - $152.92
    • (0 reviews)
      # 151405696
      Universal, XVA Series Driver or Passenger Side Monotube Shock Absorber by Bilstein®. Quantity: 1 per Pack. Finish: Clear Anodized. Lower Mounting: 1/2" Heim. Upper Mounting: 1/2" Heim. Without Boot. Diameter: 1.81". Born from a...
      Monotube internal designDual Zone gas bulb results in decreased gas pressure ramp up while increasing grip levels
      $364.06 - $772.25




    Guides & Articles

    • Off-Road Bumpers
      Skid Plates Provide The Ultimate In Off-Road Protection
      If you take your 4x4 off-roading, you have likely gained an appreciation of how unforgiving trails can be when it comes to your vehicle's underside. Deep ruts with rough edges can appear out of nowhere, sturdy-looking rocks can shift unexpectedly, and tranquil bodies of water can hide everything from sinkholes to fallen tree trunks. Before you know it, the underside of your truck has bounced off something hard enough to damage moving suspension components or puncture housings containing engine oil, gasoline, transmission fluid, or differential gear oil.
    • Performance Suspension Parts
      How much lift is needed for larger tires on my 2007-up Jeep Wrangler?
      Twenty years after the first Jeep Wrangler model debuted in 1987, third-generation Wranglers were introduced for the 2007 model year. Unlike any previous Wranglers or CJs, a 4-door Unlimited model (known internally as the "JKU" body) was offered alongside the standard 2-door ("JK" body). Because it took the off-road capability Wranglers are known for and broadened it with the practicality of 4 doors for those needing a family vehicle, third-generation Wranglers have proven very successful in the marketplace. Maintaining Jeep tradition, this Wrangler appeals by offering a higher-than-average number of advantages for the 4x4 enthusiast, whether it's used for rock crawling or as an everyday driver.
    • Performance Suspension Parts
      Coilovers Are Pricey - Why Would I Spend My Money For Them?
      When first glancing through the Performance Coilover Kits section of our website, you may be put off by some of the prices you see. After all, what are you buying other than a combo set of springs and shocks under some fancy name? Certainly, you ask yourself, can't you purchase springs and shocks separately and monetarily come out ahead?
    • Performance Suspension Parts
      Body Lifts & Suspension Lifts From 2 to 10 Inches | What are my Lift Kit Choices?
      Has this happened to you? You catch a glimpse of a truck like yours in a parking lot or around town that, for some reason, you like better than your own. It seems to have a stance that's more rugged-looking and more suited to a 4x4 than yours does. Maybe you get a chance to stop and take a closer look immediately, or maybe it's days or weeks before you see the other truck again.
    • Automotive Tools
      What Special Tools Are Available For Suspension Repair?
      Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
    • Performance Suspension Parts
      Coil, Leaf, & Torsion Bar | Describing The 3 Different Kinds of Springs
      The springs in your vehicle probably aren't something you think about until there's a problem or you've decided to upgrade suspension parts in the interest of sportier handling. But what specifically do springs do? In short, they play a major role in the safe handling and ride comfort of your vehicle. Not only do they keep a vehicle at a designated standing height, they provide recoil necessary to bounce back after suspension components move up and down over uneven road surfaces. By themselves, springs will continue to bounce up and down for a long time unless a motion damper such as a shock absorber is present to keep things stable. Springs can be soft and extremely bouncy, or they can be stiffer and less bounce-prone.
    • Performance Suspension Parts
      How Do Shock Absorbers Work?
      Shock absorbers (also known as "shocks") are the suspension components which slow, then stop, the up-and-down bouncing movement of your vehicle's springs through a process known as dampening. Without shocks to calm things down, springs will continue to extend and release energy they absorb from bumps in the road at an uncontrolled rate - bouncing for a long time until their kinetic energy finally dissipates. Needless to say, this would produce an extremely bouncy ride that would be hard to control over uneven road surfaces.
    • Performance Transmission Parts
      Suspension Enhancements Will Raise The Rear Of Your Tow Vehicle
      If you are using your "daily driver" car or truck for occasional towing duty, you are looking for that ideal sweet spot where the weekday commute is comfortable and quiet, and the weekend trailering feels solid and secure. In other words, you don't want to vehicle to feel too "stiff" during the week, nor do you want it to ride "soft" when pulling a trailer.
    • Wheels & Rims
      Stanced Wheels, Demon Camber | How Do I Get That Look?
      Stanced. Demon camber. You may know it as oni-camber. You've seen the look, and whether you like it or not is totally beside the point. The great thing about this stanced look is that it gets your attention. From the interviews we've read with owners and drivers of these machines, that is exactly what they are after. They've said that it's all about being noticed.
    • Performance Suspension Parts
      Stock vs Performance Suspension
      Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
    • Performance Suspension Parts
      Shocks Versus Struts: The Big Answers Revealed!
      Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
    • Replacement Suspension Parts
      How to Inspect Your Suspension System
      The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most specialists recommend inspecting suspension system after every 6,500-7,500 miles or when there are any signs of its breakage.
    • Performance Suspension Parts
      How Low Can You Go?
      Lowering is high on the list of many people who want to improve the appearance of their car. If you want to lower your car with the coil springs, then replacing them with lowering springs is the way to go. But what if you want to lower your car and also make it handle better? If that’s your goal then consider coil-over shocks.

    Popular Products

    2012 Toyota Sienna Performance Suspension Reviews

    Average rating:  5  5 - 12 reviews
    5 of 5
    Great Tubes
    Fit great and are heavy duty.
    DPosted by David (Albuquerque, NM) /
    Was this review helpful for you? Yes
    View More
    Related 2012 Toyota Sienna Pages
    2012 Toyota Sienna Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.