Product Details
Subaru WRX 2004, Front Mount Intercooler Kit by Mishimoto®. This premium product is the best way to go for those looking for the highest quality replacement that offers supreme levels of quality, performance and reliability. Designed to provide a perfect fit for a hassle free installation, this reliable product can help you get you vehicle back on the road faster and easier.
Notes
- Do not use with the stock ECU programming
- Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle
- This kit is rated for approximately 700 whp, or 30 psi of turbo boost
- Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler
- It is highly recoended that the customer is able to retune the vehicleÍs ECU after installing the intercooler kit
Specifications
BPV Hose I.D.: 1.25" |
BPV Hose O.D.: 1.50" |
BPV Hose Thickness: 4 mm |
Cold Side Intercooler Pipe Diameter: 2.75" |
Compressor Wheel Trim: 28" x 8.25" x 3.5" |
Computer Chip/Programmer Included: 44" x 9.00" x 5.5" |
Core Height: 3.5" |
Hot-Side: 2.25" |
Intercooler/Throttle Body Coupler I.D.: 2.75" |
Intercooler/Throttle Body Coupler Length: 3.25" |
Intercooler/Throttle Body Coupler O.D.: 3.00" |
Intercooler/Throttle Body Coupler Thickness: 4 mm |
Material: aluminum |
Max PSI: 30 psi |
Max Rear Wheel Hp Rating: 600 whp |
Tank Wall Thickness: 3,5 |
Includes
- Bar-And-Plate Intercooler: Yes
- Steel Crash Bar: Yes
- 2 Hot-Side Intercooler Pipes: Yes
- 2 Cold-Side Intercooler Pipes: Yes
- Bpv Flange Adapter: Yes
- Resistor Block Relocation Bracket: Yes
- 2 Lower Intercooler Brackets: Yes
- Aluminum Overflow Can: Yes
- Turbo To Hot Pipe Coupler: Yes
- 4 Straight Couplers: Yes
- Transition Coupler: Yes
- Bpv Recirculation Hose: Yes
- Pcv Hose: Yes
- 12 T-Bolt Clamps: Yes
- 1.5" Worm-Gear Clamp: Yes
- Bypass Valve Gasket: Yes
- Black Nylon Hose Fitting and Black Nylon Tee Hose Fitting 3/4" Inner Diameter: Yes
- 12" Of Thermal Wrap: Yes
Features
- Intercooler design optimized for maximum flow, and smooth cast end tanks allow the best possible airflow in and out of the intercooler
- Optimal core design for maximum cooling efficiency with minimal pressure drop
- Flow rated to approximately 600 whp/30 psi of turbo boost (See Tech Specs below)
- Also fits right-hand drive models
- Works with stock bypass valve or aftermarket blow-off valve
Mishimoto® Automotive is the leading manufacturer of aftermarket performance cooling products. The company was established in 2003 with the goal of providing customers with superior cooling system upgrades suited for track cars and daily drivers alike. The staff of automotive enthusiasts works hard to consistently produce the highest-quality products and provide exceptional customer service.