1988 Ford Mustang Performance Air Intake Systems

Change Vehicle
1 - 60 of 392 results
show:
sort by:
    • K&N® 57 Series FIPK Generation I Air Intake System with Intake Pipe
      (0 reviews)
      # 333636
      Ford Mustang 5.0L without Mass Air Sensor 1988, 57 Series FIPK Generation I Air Intake System with Intake Pipe by K&N®. Replacement Filter # RF-1003. Air Filter Height: 8" (203 mm). Air Filter Large End Diameter: 5.75" (146 mm)....
      Guaranteed to increase horsepower and improve accelerationCustom designed and engineered for each application
      $186.99
    • AEM® Brute Force™ Aluminum Air Intake System
      (0 reviews)
      # 253047
      Ford Mustang 5.0L with Mass Air Sensor 1988, Brute Force™ Aluminum Air Intake System by AEM®. Replacement Filter # 21-2049DK. Use with Pre-Filter # 1-4001. Includes: 5 Hose Clamps. Tube Material: Aluminum. These systems are...
      Dyno-tuned air intake pipe constructed of mandrel-bent 6061 aluminum for smooth airflowEvery system includes the innovative, oil-free, high-flow AEM Dryflow™ air filter
      $165.99 - $179.99
    • BBK® Blackout™ Black Powder Coated Cold Air Intake System
      (0 reviews)
      # 55498427
      Ford Mustang 5.0L 1988, Blackout™ Black Powder Coated Cold Air Intake System by BBK®. Gain horsepower and get an appearance improvement under the hood just by replacing your factory air intake system. The high-flow air filter and...
      Improves airflow to your engineIncludes a shield that isolates the air filter from engine heat, so it can take in cooler, denser, air
      $189.99
    • BBK® Chrome Cold Air Intake System with Polished Cast Aluminum Inlet
      (0 reviews)
      # 55498428
      Ford Mustang 5.0L 1988, Chrome Cold Air Intake System with Polished Cast Aluminum Inlet by BBK®. Non Fenderwell. High-flow conical cotton element air filter, heat shield, and large diameter, smoothly contoured air intake tube...
      Improves airflow to your engineIncludes a shield that isolates the air filter from engine heat, so it can take in cooler, denser, air
      $149.99
    • BBK® Cold Air Intake Adapter
      (0 reviews)
      # 99896945
      Ford Mustang 5.0L 1988, Cold Air Intake Adapter by BBK®. If you have an engine that uses the Speed Density method of calculating intake airflow instead of directly measuring it with a Mass Air Meter, you can install a Cold Air...
      Enables a cold air intake system designed for a mass air meter to be used on a speed density vehicleInstalls in place of the mass air meter
      $59.99
    • BBK® Cold Air Intake System with Polished Cast Aluminum Inlet
      (0 reviews)
      # 55498429
      Ford Mustang 5.0L 1988, Cold Air Intake System with Polished Cast Aluminum Inlet by BBK®. Fenderwell Style. Bolt on 7-10 horsepower and improved throttle response in minutes with a direct replacement BBK cold air kit - Fenderwell...
      Bolt-on constructionIncrease the engine power and torque
      $169.99
    • K&N® 33 Series Panel Air Filter
      (0 reviews)
      # 34626837
      Ford Mustang 1988, 33 Series Panel Air Filter by K&N®. Filter Material: Cotton Gauze. Top Style: Open. Includes: 1 Air Filter. K&N's replacement air filters are designed to increase horsepower and acceleration while providing...
      Improves engine airflowIncreases horsepower and acceleration
      $45.99 - $55.99
    • AIRAID® SynthaMax Red Air Filter
      (0 reviews)
      # 80298620
      Ford Mustang 5.0L 1988, SynthaMax Red Air Filter by AIRAID®. Advanced air filtration technology, superior construction and the world's best warranty make an AIRAID air filter the best you can buy. It allows increased airflow and...
      Improves airflow and engine performanceProvides superior air filtration and engine protection
      $76.40
    • aFe® Magnum Flow Pro 5R Panel Air Filter
      (0 reviews)
      # 919485
      Ford Mustang 5.0L 1988, Magnum Flow Panel Air Filter by aFe®. Filter Series: Pro 5R. This Pro 5R air filter provides performance filtration and maximum convenience. Constructed with 100% polyurethane on all sides, this high flow...
      Deep Cotton Pleats for Increased FlowFits In Factory Housing
      $73.95
    • aFe® Magnum Flow Pro Dry S Panel Air Filter
      (0 reviews)
      # 921764
      Ford Mustang 5.0L 1988, Magnum Flow Panel Air Filter by aFe®. Filter Series: Pro Dry S. Constructed with 100% polyurethane on all four sides, this high flow "oil-free" OE replacement performance filter will outflow stock paper...
      For Improved Horsepower And TorqueLimited Lifetime Warranty
      $73.95
    • Proform® Officially Licensed Ford Engine Dress-Up Kit
      (1 reviews)
      # 85097058
      Ford Mustang 5.0L 1988, Officially Licensed Ford Engine Dress-Up Kit by Proform®. Material: Steel. Sold as One Kit. If you are looking to enhance your vehicle's performance, then this top-notch product is definitely what you need....
      Officially Licensed Ford ProductsCarefully designed to improve the performance of your vehicle
      $187.36 - $286.48
    • S&B® Cleanable Air Filter
      (0 reviews)
      # 85546444
      Ford Mustang 1988, Cleanable Air Filter by S&B®. All filters S&B produces is manufactured to the highest standards and submitted for CARB approval.
      $30.31 - $37.24
    • BBK® Mass Air Meter
      (0 reviews)
      # 86041707
      Ford Mustang 5.0L 1988, Mass Air Meter by BBK®. 76mm Diameter. High-Flow Mass Air Meter bolts on easily and adds up to 15 rear wheel horsepower while maintaining accurate air/fuel ratio. CNC machined from aircraft grade 356...
      Dyno proven 15 horsepower increase at the rear wheelsBolts on in minutes
      $239.99 - $249.99
    • Edelbrock® Performer Intake Manifold
      (0 reviews)
      # 17624227
      Ford Mustang 5.0L 1988, Performer Intake Manifold by Edelbrock®. Idle-5500 RPM. With EGR. Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $385.07 - $746.61
    • Edelbrock® Performer RPM II Intake Manifold
      (0 reviews)
      # 17627826
      Ford Mustang 5.0L 1988, Performer RPM II Intake Manifold by Edelbrock®. 1500-6500 RPM. Without EGR. Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $710.21 - $1,327.91
    • Edelbrock® Performer RPM Intake Manifold Plenum Cover
      (0 reviews)
      # 17605847
      Ford Mustang 5.0L 1988, Performer RPM Intake Manifold Plenum Cover by Edelbrock®. 1500-6500 RPM. Includes Gasket. With EGR. Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive...
      50-state emissions street legalThe finest quality at a great price
      $95.99
    • Professional Products® Intake Manifold
      (0 reviews)
      # 97283820
      Ford Mustang 5.0L With 1500-6500 RPM Range 1988, Intake Manifold by Professional Products®. If you crave for maximum performance out of your prized possession, pick out this ultra powerful intake manifold to feed its inner beast to...
      Maximizes air flow and engine efficiencyAdds horsepower and performance
      $164.94 - $394.03
    • Weiand® Air RAM Series Intake Manifold
      (0 reviews)
      # 64867404
      Ford Mustang 5.0L 1988, Air RAM Series Intake Manifold by Weiand®. Designed for the 5.0L Ford and LS series families, this intake pick up where the factory left off. Engineered to build horsepower and torque through optimized...
      Low Rise Dual Plane Design builds maximum torque for street performance enginesSquare Bore Carburetor Mounting Flange
      $165.95 - $219.95
    • Weiand® Hi-Ram Series Intake Manifold
      (0 reviews)
      # 64846549
      Ford Mustang 5.0L 1988, Hi-Ram Series Intake Manifold by Weiand®, Power Band to: 8000 rpm. Hi-RAM Series Intake Manifold used primarily in drag racing, tractor/truck pulls and performance marine applications where high RPM is...
      $374.95
    • Weiand® X-CELerator Series Intake Manifold
      (0 reviews)
      # 64846550
      Ford Mustang 5.0L 1988, X-CELerator Series Intake Manifold by Weiand®. 360°, single-plane, open plenum manifold designed primarily for high-performance street, drag, marine and oval track use. This series works best with a higher...
      Single PlaneSquare Carburetor Mounting Flange
      $243.95
    • Trick Flow Specialties® Track Heat™ EFI Intake Manifold
      (0 reviews)
      # 91398122
      Ford Mustang 5.0L With Stock Configuration Cylinder Head Style 1988, Track Heat™ EFI Intake Manifold by Trick Flow Specialties®. Comes in a kit. Trick Flow's® Track Heat® EFI Intake Manifolds are computer-engineered to deliver...
      $672.59
    • BBK® Power-Plus Series™ Twin Throttle Body
      (0 reviews)
      # 86041715
      Ford Mustang 5.0L 1988, Power-Plus Series™ Twin Throttle Body by BBK®. Increase airflow and add 15-20 horsepower at the rear wheels by bolting on this high-flow throttle body. It’s a direct replacement for your factory throttle...
      Designed to increase airflow and improve horsepower15-20 dyno proven horsepower increase at the rear wheels depending on vehicle and application
      $199.99 - $269.99
    • Edelbrock® Pro-Flo™ XT Throttle Body
      (0 reviews)
      # 17632970
      Ford Mustang 5.0L 1988, Pro-Flo™ XT Throttle Body by Edelbrock®. Length: 90mm. Standard 5.0 Mount Bolt Pattern. They are cast, fully machined, and assembled by Edelbrock using all new components including a pre-set TPS and an...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $412.29 - $429.66
    • Edelbrock® Throttle Body
      (1 reviews)
      # 17632929
      Ford Mustang 5.0L 1988, Throttle Body by Edelbrock®. With EGR. They are cast, fully machined, and assembled by Edelbrock using all new components including a pre-set TPS and an idle air bypass solenoid. Extra idle control is...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $99.91 - $323.16
    • Professional Products® Power™ Throttle Body Assembly
      (0 reviews)
      # 97283862
      Ford Mustang 5.0L 1988, Power™ Throttle Body Assembly by Professional Products®. Power Throttle Bodies are beautifully crafted from precision die castings. A die casting is a much higher quality casting than produced by...
      $142.23 - $182.73
    • Wilson Manifolds® 90mm Throttle Body Gasket
      (0 reviews)
      # 86569556
      Ford Mustang 5.0L 1988, 90mm Throttle Body Gasket by Wilson Manifolds®. Ford Style. Wilson Manifolds carburetor base gaskets are now available in a special energy absorbing rubber material as well as a premium race proven paper...
      $3.50
    • Wilson Manifolds® 105mm 4.250" OD Throttle Body with V-Band Provision
      (0 reviews)
      # 84066767
      Ford Mustang 5.0L 1988, 105mm 4.250" OD Throttle Body with V-Band Provision by Wilson Manifolds®. Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to...
      $541.31
    • Wilson Manifolds® Throttle Body
      (0 reviews)
      # 86569557
      Ford Mustang 5.0L 1988, Throttle Body by Wilson Manifolds®. Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the...
      $333.31 - $430.20
    • Trans-Dapt® Dual Wing Design Chrome Air Cleaner Top
      (0 reviews)
      # 91571347
      Ford Mustang 5.0L With Small Block 1988, Dual Wing Design Chrome Air Cleaner Top by Trans-Dapt®. 1 Piece. Trans-Dapts' durable chrome finish looks better than stock, and the quality sealing ring means they work as well, or better...
      $40.28
    • Mr. Gasket® Intake Manifold Bolts
      (0 reviews)
      # 102171269
      Ford Mustang 5.0L 1988, Hex Head Intake Manifold Bolts by Mr. Gasket®. Includes Sems Type Captured Washers. Size: 5/16"-18 x 2".
      Returns your vehicle to its pristine stateExceptional quality at a great price
      $13.23
    • Mr. Gasket® Ultra-Seal™ Intake Manifold Gasket
      (1 reviews)
      # 102206321
      Ford Mustang 5.0L 1988, Ultra-Seal™ Intake Manifold Gasket by Mr. Gasket®. You won't find a more perfect way to make your vehicle look better and drive faster than with the top-notch Mr. Gasket products. That is the only stop you...
      Returns your vehicle to its pristine stateExceptional quality at a great price
      $22.41 - $23.43
    • Mr. Gasket® Upper Intake Manifold Gasket
      (1 reviews)
      # 102171270
      Ford Mustang 5.0L 1988, Upper Stock Port Intake Manifold Gasket by Mr. Gasket®. Size: 2.11" H, 1.25" W. 1/16" Thickness. You won't find a more perfect way to make your vehicle look better and drive faster than with the top-notch...
      Returns your vehicle to its pristine stateExceptional quality at a great price
      $12.21
    • Professional Products® Intake Manifold Bolt Set
      (0 reviews)
      # 97296677
      Ford Mustang 5.0L 1988, Intake Manifold Bolt Set by Professional Products®. Material: Stainless Steel. 12 Point.
      $24.50
    • Professional Products® Power+Plus™ Intake Manifold Gasket Set
      (0 reviews)
      # 97296718
      Ford Mustang 5.0L 1988, Power+Plus™ Intake Manifold Gasket Set by Professional Products®. Replace your blown or leaky intake manifold gaskets with this direct-fit replacement set which is ideal for your restoration needs. Each...
      High performance gasketsSilicone beading for additional sealing
      $16.33
    • Professional Products® Typhoon™ Intake Manifold Spacer
      (0 reviews)
      # 97296743
      Ford Mustang 5.0L 1988, Typhoon™ Intake Manifold Spacer by Professional Products®. Thick: 0.5".
      $79.59
    • RHS® Street Tunnel Ram Intake Gasket
      (0 reviews)
      # 89698387
      Ford Mustang 5.0L 1988, Street Tunnel Ram Intake Gasket by RHS®. Size: 1.29"x 2.12".
      $29.54
    • Trick Flow Specialties® EFI Heat Spacer Kit
      (0 reviews)
      # 91398125
      Ford Mustang 5.0L 1988, EFI Heat Spacer Kit by Trick Flow Specialties®. Comes in a kit. Includes Hardware, Gaskets. Spacer made from Phenolic. CNC-machined in the USA from premium phenolic material, Trick Flow® EFI heat spacers...
      $95.72 - $119.51
    • Moroso® Vacuum Pump Drive Kit
      (0 reviews)
      # 84998278
      Ford Mustang 5.0L With Small Block 1988, Vacuum Pump Drive Kit by Moroso®. With this quality part backed by a great price, you can enjoy your vehicle so much more than you thought was possible. This Moroso part is specifically...
      $231.24
    • AIRAID® PowerAid™ Throttle Body Spacer
      (0 reviews)
      # 434634
      Ford Mustang 5.0L 1988, PowerAid™ Throttle Body Spacer by AIRAID®. The patented Helix Bore in the PowerAid™ Throttle Body Spacer causes a spinning action of the incoming air charge as it passes through the throttle body. This...
      Enhances fuel atomization, which improves combustion and engine efficiencyIncreases low end torque and fuel economy
      $112.10
    • BBK® Fuel Pressure Regulator
      (0 reviews)
      # 99897241
      Ford Mustang 1988, Fuel Pressure Regulator by BBK®. BBK billet fuel pressure regulators are a great way to tune your vehicle to obtain optimum air / fuel ratios and achieve maximum horsepower. Each fuel pressure regulator is made...
      Great For Mild To Wild ApplicationsCNC Machined Billet Aluminum
      $59.99 - $109.99
    • BBK® Throttle Position Sensor
      (0 reviews)
      # 97259729
      Ford Mustang 5.0L 1988, Throttle Position Sensor by BBK®. The throttle position sensor monitors the position of the throttle valve and sends this information to the engine control computer. Don’t trust this important function to...
      Monitors throttle valve position and provides input to engine control computerBuilt to OEM quality standards
      $49.99
    • JET® Powr-Flo™ Throttle Body Spacer
      (0 reviews)
      # 13547796
      Ford Mustang 5.0L 1988, Powr-Flo™ Throttle Body Spacer by JET®. JET Performance Powr-Flo Throttle Body Spacers were designed using the latest aerospace technology along with JET's 35 plus years of engineering fuel systems for...
      Increased Mid-Range Horsepower And TorqueImproved Throttle Response/Increased Fuel Economy
      $74.99
    • Professional Products® Throttle Position Sensor
      (0 reviews)
      # 97296865
      Ford Mustang 5.0L 1988, Throttle Position Sensor by Professional Products®.
      $34.64
    • Trans-Dapt® Chrome Throttle Return Spring Bracket
      (0 reviews)
      # 56806355
      Ford Mustang 5.0L With Small Block Ford 1988, Chrome Throttle Return Spring Bracket by Trans-Dapt®. Chrome plated carburetor spring brackets provide an extremely convenient location to hook up your carburetor return spring....
      $5.72
    • Trick Flow Specialties® Natural Throttle Cable Bracket
      (0 reviews)
      # 91393636
      Ford Mustang 5.0L 1988, Natural Throttle Cable Bracket by Trick Flow Specialties®. 1 Piece. Includes Hardware. Bracket made from Aluminum. These Trick Flow® throttle cable brackets provide a place to mount throttle cables on...
      $71.28
    • BBK® Intake Manifold Gasket
      (0 reviews)
      # 99896946
      Ford Mustang 5.0L 1988, Intake Manifold Gasket by BBK®. These high quality gaskets are the same as the ones that come with BBK phenolic spacer kits. If you’re performing a motor rebuild or for whatever reason you may be removing...
      Available for all BBK phenolic spacer kitsWorks on many aftermarket intake manifolds
      $14.99
    • BBK® Phenolic Factory Manifold Spacer Kit
      (0 reviews)
      # 99897227
      Ford Mustang 5.0L 1988, by BBK®. Gain 4-7 horsepower easily and inexpensively with this bolt-on intake manifold spacer. It installs between the upper and lower intake manifold, where it will increase runner length and reduce air...
      Increases intake manifold runner length and reduces heat transfer from the lower to the upper intake manifoldIncreased runner length and reduced air inlet temperature results in 4-7 horsepower increase
      $69.99
    • Cometic Gasket® 0.060" Aramid Fiber Intake Head Gasket
      (0 reviews)
      # 81471573
      Ford Mustang 5.0L Small Block Windsor Engine 1988, 0.060" Aramid Fiber Intake Head Gasket by Cometic Gasket®. Compressed Thickness: 0.060". Port Style: N351 Sportsman. Cometic MLS Gaskets are comprised of multiple layers of...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $28.34
    • Edelbrock® Intake Gasket
      (0 reviews)
      # 17598837
      Ford Mustang 5.0L Small Block 1988, Intake Gasket by Edelbrock®. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's gaskets are not only manufactured...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $25.59 - $121.19
    • ARP® Intake Manifold Bolt Kit
      (0 reviews)
      # 95483483
      Ford Mustang 5.0L Ford Engine with Small Block 1988, Intake Manifold Bolt Kit by ARP®. Quantity: Kit. Package Type: Skin. Prevent intake manifold leaks with ARP’s quality fasteners. They’re nominally rated at 180,000 psi and...
      $36.57 - $53.63
    • ARP® Intake Manifold Stud Kit
      (0 reviews)
      # 95391670
      Ford Mustang 5.0L Ford Engine with Small Block 1988, Intake Manifold Stud Kit by ARP®. Finish: Black. Material: 8740 Chrome Moly. Quantity: Kit. Package Type: Skin. Prevent intake manifold leaks with ARP’s quality fasteners....
      $76.18
    • Magnum Gasket® Engine Intake Manifold Gasket
      (0 reviews)
      # 82704397
      Ford Mustang 5.0L 1988, Engine Intake Manifold Gasket by Magnum Gasket®. Standard Material. Magnum's Gasket engineers have utilized their many years of engine sealing experience to select the right technology choice for each of the...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $5.35
    • Magnum Gasket® MaxPrint™ Intake Manifold Gasket Set
      (0 reviews)
      # 82704396
      Ford Mustang 5.0L 1988, MaxPrint™ Intake Manifold Gasket Set by Magnum Gasket®. Screen Printed Sealing Beads. Includes Plenum gasket set. Magnum's Gasket engineers have utilized their many years of engine sealing experience to...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $13.98
    • BBK® Throttle Body Gasket Kit
      (0 reviews)
      # 86041723
      Ford Mustang 5.0L 1988, Throttle Body Gasket Kit by BBK®. These high quality gaskets are the same as the ones that come with BBK throttle bodies. If you’re performing a motor rebuild or for whatever reason you may be removing and...
      Available for all BBK throttle body applicationsStamped from high-quality materials
      $12.99 - $14.99
    • Bosch® Air Filter
      (0 reviews)
      # 78096061
      Ford Mustang 1988, Air Filter by Bosch®. Dirty air filters can cause decreased fuel mileage, increased engine wear, and even problems starting the engine. Check your engine air filter at every oil change and always replace a dirty...
      Protects Your Engine by Stopping 98% of Engine-Threatening ParticlesPrevention of Unfiltered Air Entering Engine Intake with a High-Quality Seal
      $6.98 - $9.92
    • Denso® Air Filter
      (0 reviews)
      # 85801827
      Ford Mustang 5.0L 1988, Air Filter, FTF Air Filter by Denso®. The air filter is the last line of defense against the harmful airborne abrasives that have been proven to wear out engines before their time. With OE-quality...
      High airflow rate improves performance and fuel economySuperior dust holding capacity increases filter life
      $8.65
    • FRAM® Extra Guard™ Flexible Panel Air Filter
      (0 reviews)
      # 83767534
      Ford Mustang 1988, Extra Guard™ Flexible Panel Air Filter by FRAM®. Most dirt and dust enters the engine through the air filter and FRAM Extra Guard is engineered to provide twice the air filtration compared to an original...
      Provides better air filtration for improved performancePrevents damaging particles from entering your engine
      $9.24
    • Full® Air Filter
      (0 reviews)
      # 8012980
      Ford Mustang 5.0L 1988, Air Filter by Full®. If you have a dirty air filter, clogged PCV valve, or defective MAF sensor you may be tempted to just run down to the local auto parts chain store for a replacement, but before you waste...
      OE quality parts from top original equipment and aftermarket manufacturersFast shipping; 1-2 day delivery time regardless of where you’re located
      $10.85
    • Hastings® Air Filter
      (0 reviews)
      # 21484466
      Ford Mustang 1988, Air Filter by Hastings®. Clean air is critical to the performance of your engine, so don’t trust just any filter. Hastings filters are tested according to SAE J726 test procedures, where they meet or exceed the...
      Filters out dirt and dust in the air preventing them from entering the engineHeavy duty construction for long service life
      $9.34 - $9.45
    • Motorcraft® Air Filter
      (0 reviews)
      # 23884481
      Ford Mustang 1988, Air Filter by Motorcraft®. The air filter is a simple yet crucial part of your vehicle that keeps dust and road debris out of the engine. If the air filter is clogged up and starts to choke off the airflow to...
      Direct OEM replacement for proper fitRecommended by Ford Motor Company
      $16.54




    Guides & Articles

    • Performance Air Intake Systems
      Can an Air Intake System also Increase My Fuel Economy?
      We all know that achieving better fuel economy while driving puts money back in your pocket and does the environment a favor. But for those who are actively interested in squeezing the most out of every drop of gas, getting more miles per gallon can actually become a sport - especially if a vehicle has a manual transmission that can be upshifted earlier and put into neutral during downhill grades or when coasting to a stop sign.
    • Performance Air Intake Systems
      The Real Cost of Your Car’s Cheap Factory Air Filter
      In today's world, saving money wherever possible has become essential. But it's important not to lose sight of the fact that, sometimes, a product that costs more up front will save you more money over time. In our business, we've seen far too many consumers judge products solely on the basis of their initial cost, completely neglecting any long-term economy and benefits. When it comes to automobiles, "performance" air filters are a perfect example of this.
    • Performance Air Intake Systems
      My Car is Brand New | Why Should I Change My Air Intake System?
      Aftermarket air intake systems have become one of the most popular engine modifications available for late model cars and trucks. An easy question to ask is why are these so popular? After all, didn't engineers who work for your vehicle manufacturer spend years developing the best engine components available? Since power and fuel economy are major selling points these days, it's hard to imagine car companies not doing everything they can to maximize horsepower, miles per gallon, or both.
    • Performance Air Intake Systems
      What are the Different Types of Air Intake Systems?
      There are many types of aftermarket air intake systems that range from simple and inexpensive to elaborate. In the scope of this article, we'll examine the different types of air intakes, what they do, and look at a few specific product examples of each. But in short, performance air intake setups increase airflow into your engine - boosting combustion and creating more horsepower and torque that you can actually feel. Their relatively low cost and easy installation (bolt-on in most cases) keeps them in popular demand by car enthusiasts that own everything from 1.5-liter turbo motors to big block V8 engines.
    • Replacement Air Intake Parts
      Why Does My Car Have a Plastic Intake Manifold?
      An intake manifold is an integrated assembly that sits atop the engine, consisting of a series of tubes which distribute fresh outside air to each and every cylinder. On V-shaped engine blocks, an intake manifold typically sits between the two cylinder banks while inline engines may feature a manifold to the side of the cylinder head. Intake manifolds serve as a mounting point for carburetors, throttle body assemblies, fuel injectors, thermostats, and more depending on vehicle manufacturer engineering preferences. Intake manifolds may also serve to route coolant through dedicated channels in order to remove heat from the engine. Because of their location and functionality, intake manifold assemblies are under constant stress from engine vacuum pressure as well as direct heat from coolant, cylinder combustion gasses, and the cylinder heads to which they are mounted.

    Popular Products

    1988 Ford Mustang Performance Air Intake Systems Reviews

    Average rating:  5  5 - 1 review
    5 of 5
    CARiD Service
    Received product timely, but it was throttle body erg spacer instead of throttle body. They were very helpful in getting me a free return shipping and refund. 5 stars for service. Jackie.
    JPosted by Jackie (Toney, AL) /
    1992 Ford Mustang
    Was this review helpful for you? Yes
    Related 1988 Ford Mustang Pages
    1988 Ford Mustang Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.