1987 Ford F-250 Performance Exhaust Systems

Change Vehicle
1 - 60 of 854 results
show:
sort by:
    • (0 reviews)
      # 573040
      Ford F-250 Custom 7.5L with 2.5" Catalytic Converter 1987, Force II™ Aluminized Steel Single Cat-Back Exhaust System with Single Side Exit by Flowmaster®. Exhaust Pipe Material: Aluminized Steel. Exit Location: Single Side Exit....
      Available sound levels: Mild Sound / Mild - Moderate Sound (depends on application and exhaust type)Increases Power
      $356.97
    • (0 reviews)
      # 3730902
      Ford F-250 1987, Dual Sport™ Cat-Back Exhaust System by Gibson®. Exit Location: Behind Rear Tire Exit. Exhaust Type: Cat-Back. Main Piping Diameter: 2.5". Muffler Quantity: Single. Muffler Body Height: 7". Muffler Body Width: 7"....
      Increase of 10-15 horsepower and pound feet of torqueDeep, Commanding Exhaust Tone
      $466.35 - $608.17
    • (0 reviews)
      # 3732386
      Ford F-250 1987, Split Rear™ Dual Cat-Back Exhaust System with Straight Out The Back Exit by Gibson®. Exit Location: Straight Out The Back Exit. Exit Configuration: Dual. Exhaust Type: Cat-Back. Main Piping Diameter: 2.5"....
      Increase of 10-15 horsepower and pound feet of torqueAggressive, throaty exhaust tone
      $466.35 - $608.17
    • (2 reviews)
      # 3732935
      Ford F-250 1987, Super Truck™ Single Cat-Back Exhaust System by Gibson®. Exit Location: In Front of Rear Tire Exit. Exit Configuration: Single. Exhaust Type: Cat-Back. Main Piping Diameter: 2.5". Muffler Quantity: Single. Muffler...
      Increase of 15-20 HorsepowerLoud Performance Exhaust Tone; may exceed 95 decibels
      $387.54 - $432.62
    • (0 reviews)
      # 3733989
      Ford F-250 1987, Swept Side™ Single Cat-Back Exhaust System by Gibson®. Exit Location: Behind Rear Tire Exit. Exit Configuration: Single. Exhaust Type: Cat-Back. Main Piping Diameter: 3". Muffler Quantity: Single. Muffler Body...
      Less restriction for increased exhaust flowIncrease of 10-15 horsepower and pound feet of torque
      $387.54 - $532.92
    • (0 reviews)
      # 64168103
      Ford F-250 5.0L 1987, Dual Competition™ Header-Back Exhaust System Kit by Hooker®. Exhaust Type: Header-Back. Muffler Series: Dual Competition™. Full stainless steel exhaust system comes complete with stamped crossover for a...
      This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing VehiclesEach system is supplied with a high-efficiency stamped crossover & high-flow TIG-welded 304 SS absorption mufflers
      $198.95
    • (0 reviews)
      # 64168104
      Ford F-250 4.9L / 5.0L 1987, Dual Competition™ Manifold-Back Exhaust System by Hooker®. Exhaust Type: Manifold-Back. Main Piping Diameter: 2.25". Muffler Series: Dual Competition™. Hooker Manifold Back exhaust system is...
      Reducer Flex-TubesReduces Backpressure
      $228.95
    • (0 reviews)
      # 70304512
      Ford F-250 V8 1987, Scavenger Series Block Hugger Style Ceramic Coated Elite Headers by Flowmaster®. Sema Emissions Code: 3. Compact Rear Dump Configuration. Attachment Method: Ball and Socket Flange. 2 per Pack. Inlet Port Shape:...
      Increases horsepower and torqueImproves engine efficiency and throttle response
      $593.19
    • (0 reviews)
      # 179259335
      Ford F-250 1987, Performance Header by Gibson®. CARB Compliant: Yes. Finish: Chrome Plated. Primary Tubing Diameter: 1.5". Let your engine breathe and gain power and performance with Gibson Nickel Chrome Plated Steel Performance...
      Increases low and mid-range horsepower and torqueIncreases engine efficiency
      $428.74
    • (0 reviews)
      # 203420770
      Ford F-250 Windsor Engine 1987, Block Hugger Headers by Flowtech®. CARB Compliant: No. System Type: Block Hugger. Primary Tubing Diameter: 1.625". Collector Outlet Diameter: 2.5". Flowtech Headers are the perfect combination of...
      Tight fit block hugger design for popular hot rod and street rodsHeavy duty 16-gauge tubing for increased strength and durability
      $179.95 - $349.95
    • (0 reviews)
      # 145704044
      Ford F-250 5.0L Automatic Transmission 1987, Mild Steel Black Painted Long Tube Headers by Flowtech®. CARB Compliant: No. Finish: Black Painted. Primary Tubing Diameter: 1.5". Collector Outlet Diameter: 2.5". Header Material: Mild...
      Mandrel-formed Power Plenum collectors for low backpressureConstructed of .060 cold roll flash mild steel tubing
      $175.95
    • (0 reviews)
      # 64825002
      Ford F-250 1987, Mild Steel Long Tube Headers by Flowtech®. CARB Compliant: No. Header Material: Mild Steel. FLOWTECH headers are precision engineered and leak tested to get maximum performance and fuel economy from your engine....
      Mandrel-formed Power Plenum collectors for low backpressureConstructed of .060 cold roll flash mild steel tubing
      $191.95 - $415.95
    • (0 reviews)
      # 142872650
      Ford F-250 with Factory Exhaust System 1987, Mild Steel Shorty Headers by Flowtech®. CARB Compliant: Yes. System Type: Short Tube. Primary Tubing Diameter: 1.5". Collector Outlet Diameter: 2.5". Header Material: Mild Steel....
      This is a 50-State Legal headerSturdy 16 gauge tubing
      $266.95 - $427.95
    • (0 reviews)
      # 64181474
      Ford F-250 1987, Competition™ Full Length Header by Hooker®. Series: Competition™. CARB Compliant: No. Collector Length: 8". Port Shape: Same As Port. All necessary hardware included for a complete installation. Hooker...
      Mandrel-bent tubing for smooth exhaust flowLight weight & sturdy 16 gauge tubing
      $219.95 - $571.95
    • (0 reviews)
      # 64168098
      Ford F-250 4.9L 1987, Super Competition™ Black Painted Full Length Header by Hooker®. Series: Super Competition™. Primary Tubing Diameter: 1.625". Collector Outlet Diameter: 2.5". CARB Compliant: No. Full Length. All necessary...
      Tuned-length primary tubes for maximum exhaust scavenging and velocityMandrel-bent tubing for smooth exhaust flow
      $496.95
    • (0 reviews)
      # 91560803
      Ford F-250 5.0L With Small Block Ford Engine 1987, Raw Steel Tight Tuck Street Rod Headers, 1 5/8" Tubes by Patriot Exhaust®. Collector diameter: 2 1/2". Tight Tuck headers are the solution to many problems associated with engine...
      Tight Tucks fit in the tightest of engine compartments and clear most stock motor mounts.Durable 16-gauge tubing
      $188.16
    • (0 reviews)
      # 87328092
      Ford F-250 With Ford Small Block Engine Windsor Engine 1987, IMCA Modified Headers by Schoenfeld Headers®. Includes: Bolts/Studs, Gaskets. Header made from Steel. This top-notch product by Schoenfeld Headers is made to give that...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $253.45 - $272.95
    • (0 reviews)
      # 56801715
      Ford F-250 With Ford Small Block Engine 4.9L / 5.0L 1987, Sprint Car Headers by Schoenfeld Headers®. 1 Pair. Header made from Steel. Painted. Primary Tubing Diameter: 1.75". Collector Diameter: 3.5". Collector Length: 13". This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $272.95
    • (0 reviews)
      # 87328099
      Ford F-250 With Ford Small Block Engine Windsor Engine 1987, Stock Clip Crossover Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $292.45 - $302.20
    • (0 reviews)
      # 56801743
      Ford F-250 With Ford Small Block Engine 5.0L 1987, Stock Clip Headers by Schoenfeld Headers®. Comes in a set. Fenderwell, Painted. Includes: Bolts/Studs, Gaskets. Header made from Steel. Primary Tubing Diameter: 1.75"-1.875"....
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $311.95
    • (0 reviews)
      # 87328073
      Ford F-250 With Ford Big Block Engine 7.5L 1987, Truck Pull Header by Schoenfeld Headers®. 1 Pair. Upsweep 4 x 4, Painted. Includes: Bolts/Studs, Gaskets. Header made from Steel. Collector Diameter: 4". Collector Length: 10". This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $370.45 - $374.35
    • (0 reviews)
      # 136721744
      Ford F-250 1987, Mild Steel Long Tube Headers by PaceSetter®. CARB Compliant: No. Header Material: Mild Steel. Collector Diameter: 3". Primary Tubing Diameter: 1.625". Quality manufactured and affordably priced, PaceSetter Long...
      3/8” thick CNC-machined, port matched steel flanges1-7/8” or 1-3/4” 16-gauge mild steel, mandrel-bent primaries
      $252.25 - $400.92
    • (0 reviews)
      # 120513989
      Ford F-250 1987, Mild Steel Shorty Exhaust Headers by PaceSetter®. CARB Compliant: Yes. Header Material: Mild Steel. Collector Diameter: 2.5". Primary Tubing Diameter: 1.5". 1 pair. If you want to get the most out of your vehicle,...
      Machined flanges and 16-gauge primaries, just like race long tubesPollution control hook ups
      $201.35 - $351.81
    • (0 reviews)
      # 97229510
      Ford F-250 Custom with Air Conditioning with Power Steering 1987, Elite Ultra-Duty Full Length Headers by Hedman Hedders®. System Type: Full Length. Collector Outlet Diameter: 3". Hedman's ELITE Hedders are the best you can buy....
      Made of High Quality MaterialsIdeal for Heavy Duty Applications
      $453.57 - $581.76
    • (0 reviews)
      # 97229516
      Ford F-250 Custom with Air Conditioning with Power Steering 1987, Standard Duty Headers by Hedman Hedders®. The standard-duty Hedman Hedders come from the factory with an extremely durable, protective ceramic-metallic coating....
      Made of High Quality MaterialsBuilt to Last
      $215.73 - $626.56
    • (1 review)
      # 199201384
      Ford F-250 5.0L 1987, Direct Fit Stainless Steel Federal Catalytic Converter by Flowmaster®. Inlet Diameter: 2". Outlet Diameter: 2.25". Catalytic Converter Body Length: 55". Converter Configuration: Direct Fit. Catalytic Converter...
      Exceed all federal emission standardsStainless Steel shells
      $295.05
    • (0 reviews)
      # 61588358
      Ford F-250 1987, Direct Fit California Pre-OBDII Catalytic Converter by MagnaFlow®. Catalytic Series: Pre-OBDII. Catalytic Converter Substrate Material: Ceramic. Converter Body Material: Stainless Steel. CARB Compliant: Yes....
      Increases exhaust flow compared to original factory converterIncreased exhaust flow allows your engine to make more power
      $475.57 - $522.80
    • (0 reviews)
      # 61588357
      Ford F-250 1987, Direct Fit Federal Standard Catalytic Converter by MagnaFlow®. Catalytic Series: Standard. Catalytic Converter Substrate Material: Ceramic. Converter Body Material: Stainless Steel. CARB Compliant: No. Converter...
      Converter body manufactured from heavy-duty stainless steelIncreases exhaust flow compared to original factory converter
      $246.93 - $405.15
    • (0 reviews)
      # 18220844
      Ford F-250 133.0" Wheelbase 1987, Super Turbo™ Aluminized Steel Oval Muffler by DynoMax®. Muffler Sound: Mild Tone. Muffler Structure: Chambered. Muffler Body Height: 4.25". Muffler Body Material: Aluminized Steel. Muffler Body...
      Constructed to increase horsepower and torque thanks to improved exhaust flowAluminized steel Super Turbo muffler maintains a mellow performance tone
      $70.45 - $88.06
    • (1 review)
      # 18216276
      Ford F-250 4.9L / 5.0L / 5.8L 133.0" Wheelbase with Dual Exhaust System with Under 8500 GVWR 1987, Ultra Flo™ Polished Center - Dual Stainless Steel Oval Muffler by DynoMax®. Inlet - Outlet Configuration: Center - Dual. Muffler...
      Unrestricted, straight-through design for a dyno-proven increase in horsepower and torqueEngineered to give your car a deep performance tone
      $80.34
    • (0 reviews)
      # 18216479
      Ford F-250 4.9L / 5.0L / 5.8L 133.0" Wheelbase with Dual Exhaust System with Under 8500 GVWR 1987, Ultra Flo™ Welded Center - Dual Stainless Steel Oval Muffler by DynoMax®. Inlet - Outlet Configuration: Center - Dual. Muffler...
      Unrestricted, straight-through design for a dyno-proven increase in horsepower and torqueEngineered to give your car a deep performance tone
      $115.85
    • (0 reviews)
      # 18221573
      Ford F-250 4.9L / 5.0L / 5.8L 133.0" Wheelbase with Dual Exhaust System with Under 8500 GVWR 1987, Aluminized Steel Driver Side Extension Pipe by DynoMax®. Material: Aluminized Steel. Inlet Connection Type: Pipe Connection. Inlet...
      Designed to ensure unrestricted exhaust flowDirect fit – no modifications needed to install
      $41.76
    • (0 reviews)
      # 18219636
      Ford F-250 133.0" Wheelbase 1987, Aluminized Steel Intermediate Pipe by DynoMax®. Material: Aluminized Steel. Inlet Connection Type: Pipe Connection. Inlet Diameter: 2.25". Outlet Connection Type: Pipe Connection. With their great...
      Designed to ensure unrestricted exhaust flowDirect fit – no modifications needed to install
      $30.93 - $45.36
    • (0 reviews)
      # 18221680
      Ford F-250 133.0" Wheelbase 1987, Aluminized Steel Tail Pipe by DynoMax®. Material: Aluminized Steel. Inlet Connection Type: Pipe Connection. With their great selection of exhaust pipes and accessories, DynoMax will provide you...
      Designed to ensure unrestricted exhaust flowDirect fit – no modifications needed to install
      $26.95 - $59.29
    • (0 reviews)
      # 97684496
      Ford F-250 1987, Dual Pipe Kit by DynoMax®. With their great selection of exhaust pipes and accessories, DynoMax will provide you with everything necessary to complete the exhaust job. Every component is manufactured from quality...
      Special reducer design allows for a variety of mounting optionsExtra long 16-gauge tailpipe with side exits and a full 2.25-in. or 2.5-in. diameter
      $163.06
    • (0 reviews)
      # 142872614
      Ford F-250 5.0L / 7.5L 1987, 3-Bolt Reducer with O2 Sensor Fitting by Flowtech®. 3-Bolt. Flowtech understands that when you purchase a set of headers, a muffler, or even an entire exhaust system, you want to know that you’re...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $37.50
    • (0 reviews)
      # 18216724
      Ford F-250 4.9L / 5.0L / 5.8L 133.0" Wheelbase with Dual Exhaust System with Under 8500 GVWR 1987, Steel Exhaust Bracket by DynoMax®. Material: Steel. DynoMax has you covered with a full line of accessories and hardware needed to...
      Designed to do the exhaust job quickly and easilyOE-style fit, design, and finish
      $22.26
    • (0 reviews)
      # 162647695
      Ford F-250 1987, Premium Series™ Header Gasket Set by BBK®. These premium steel core graphite gaskets are flexible for a long lasting leak-proof seal even when cylinder head and header flange surfaces aren’t perfectly flat....
      Provides a long lasting, leak-proof sealFlexible graphite will conform to surface irregularities and won’t stick to headers or cylinder head
      $14.99 - $39.99
    • (0 reviews)
      # 78901220
      Ford F-250 5.0L / 5.8L 1987, Exhaust Manifold Flange by Vibrant Performance®. Thickness: 0.375". Do you want to get more power out of your vehicle? Then this superior Vibrant Performance product is just for you. Carefully designed...
      Made of High Quality MaterialsAvailable in different sizes
      $146.21
    • (0 reviews)
      # 142872644
      Ford F-250 1987, Aluminum Header Gasket Set by Flowtech®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by...
      Engineered for a precise, easy fitManufactured of P73 Ferroglass non-asbestos facing material for long life
      $10.04
    • (0 reviews)
      # 142872647
      Ford F-250 1987, Real-Seal™ Aluminum Header Gaskets by Flowtech®. Flowtech REAL-SEAL header and collector gaskets are a revolutionary break-through in exhaust sealing technology. Constructed of separate layers of “Dead Soft”...
      Multi-Layer “Dead Soft” aluminum conforms to create a leak-proof sealWill not burn or blow out
      $45.62
    • (0 reviews)
      # 64181501
      Ford F-250 1987, Super Competition™ Fiber Header Gasket by Hooker®. Series: Super Competition™. Thickness: 0.07". Hooker's precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing....
      Precision fit for improved sealingSteel core provides superior adhesion
      $12.89 - $13.97
    • (0 reviews)
      # 73935471
      Ford F-250 1987, Pressure Master™ Header Seal by Earl's Performance®. Pressure Master™ Seals, designed and manufactured for Earl’s by Parker Hannifin Corporation, were the first high performance seals developed to solve...
      Uses Aerospace TechnologyReusable/Adaptable
      $19.07 - $43.46
    • (0 reviews)
      # 102051952
      Ford F-250 7.5L 1987, Rectangle Aluminum Exhaust Gasket Set by Mr. Gasket®. Aluminum Layered. Size: 1.25" x 2.08". 1/8" Thickness. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $24.95
    • (0 reviews)
      # 102171248
      Ford F-250 5.0L 1987, Rectangular Port Exhaust Header Gasket by Mr. Gasket®. Ultra-Seal. Includes Header Exhaust, Collector Flange Gasket, Header and Collector Flange Bolts.
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $30.57
    • (0 reviews)
      # 102205515
      Ford F-250 1987, Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need gaskets and...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $17.31 - $24.95
    • (0 reviews)
      # 102205520
      Ford F-250 1987, Ultra-Seal™ Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll...
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $22.41 - $42.99
    • (0 reviews)
      # 12054533
      Ford F-250 1987, Exhaust Header Gaskets by Spectre Performance®. Package Quantity: 2. Includes: 2 Gaskets. Rooted in racing, Spectre Performance designs and builds every product with the same goal in mind - the best performance in...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      $8.52 - $19.91
    • (0 reviews)
      # 199861710
      Ford F-250 1987, Vibe-Lock Header Bolt Kit by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $49.65 - $91.82
    • (0 reviews)
      # 17594777
      Ford F-250 1987, Exhaust Gasket by Edelbrock®. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's gaskets are not only manufactured from extremely high...
      Fast shipping; 1-2 day delivery time regardless of where you’re locatedThe finest quality at a great price
      $19.70 - $21.83
    • (0 reviews)
      # 61602188
      Ford F-250 7.5L 1987, 0.030" MLS Exhaust Head Gasket by Cometic Gasket®. Compressed Thickness: 0.030". Port Style: Oval. Cometic MLS Gaskets are comprised of multiple layers of stainless steel providing a even load across the...
      Made of High Quality MaterialsBuilt to Last
      $39.64
    • (0 reviews)
      # 91566119
      Ford F-250 1987, Header Flange Kit by Patriot Exhaust®. Includes Gaskets, Mounting Hardware. Header Flange made from Steel. Patriot Exhaust's machined header flange kits are available for many popular engine families. Header flange...
      Precision machined header flangesSupplied with our premium head gaskets
      $42.97 - $55.42
    • (0 reviews)
      # 84371086
      Ford F-250 5.0L 1987, Header Gasket Set by Proform®. If you are looking to enhance your vehicle's performance, then this top-notch product is definitely what you need. Manufactured from premium quality materials this Proform...
      Carefully designed to improve the performance of your vehicleCrafted from first-rate materials
      $27.76
    • (0 reviews)
      # 87328086
      Ford F-250 With Ford Small Block Engine Windsor Engine 1987, Header Flanges by Schoenfeld Headers®. 1 Piece. Header Flange made from Steel. This top-notch product by Schoenfeld Headers is made to give that extra boost that every...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $36.21
    • (0 reviews)
      # 87328080
      Ford F-250 With Ford Small Block Engine 1987, Header Gasket by Schoenfeld Headers®. 1 Piece. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $13.34
    • (0 reviews)
      # 69377154
      Ford F-250 7.5L With Big Block 1987, Manifold Heat Spacer by BTP®. This premium quality part by BTP helps your exhaust system to perform at its full efficiency as well as provide your vehicle with a more aggressive and powerful...
      Engineered to make your exhaust system perform at its peakProvides a powerful and aggressive sound
      $23.49 - $35.10
    • (0 reviews)
      # 116554924
      Ford F-250 1987, Manifold Gasket Set by Magnum Gasket®. Standard Material. You'd better be ready to take the heat if you're going to seal an exhaust manifold, where temperatures can often exceed 1,000°F. You can count on Magnum to...
      Made of High Quality MaterialsThe best combination of steel layers and high-temp gasket materials
      $11.22 - $12.11
    • (0 reviews)
      # 144951017
      Ford F-250 1987, Copper Exhaust Header Gasket by Big End Performance®, 1 Pair. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It...
      High quality at an affordable priceExpertly made from premium materials
      $34.08 - $40.28
    • (0 reviews)
      # 95719754
      Ford F-250 Ford Engine 1987, Header Bolt Kit by ARP®. Thread Size: 3/8. Quantity: Set of 16. Package Type: Skin. ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including...
      Designed to unlock more performance out of your vehicleDeliver a reasonable balance of strength and durability
      $25.60 - $163.63
    • (0 reviews)
      # 91087910
      Ford F-250 7.5L With Bigl Block Ford 1987, 3/8"-16 x 3/4" Standard Head Header Bolts by Trans-Dapt®. Size: 3/8"-16 x 3/4". 16 piece set. 3/8"-16 x 3/4". Fastener made from Steel. Standard header bolts, from Trans-Dapt Performance...
      Expertly crafted from premium materialsDesigned to match rigorous quality standards
      $8.36




    Guides & Articles

    • Performance Exhaust Systems
      Here's A "Tip": Exhaust Tips Are An Easy Way To Dress Up Your Tailpipe
      Performance exhaust systems give you improvements in power output, sound levels, and appearance, all in one package. But let's face it: not everyone has the spare change to buy and bolt up one of these kits. So you soldier on with what you have. And that may be a tired-looking exhaust system that is still functional. You've spent all day washing and waxing the vehicle's paint and chrome to perfection, but no degree of elbow grease will make that tailpipe look better.
    • Performance Exhaust Systems
      Are Headers Worth The Performance Improvement?
      Engines have often been compared to air pumps, because the engine that’s most efficient in terms of economy and power is the one that can get air in and out of its cylinders the easiest. That’s why most performance modifications like conical air filters, cold air intake systems, headers, and cat-back exhaust systems are aimed at making the intake and exhaust systems less restrictive. These parts increase the flow of air into the engine and ease the flow of exhaust gas out of the engine. Among these components, headers may be the most difficult to install. In this article, we’ll discuss what headers do, their different types, and how much performance they can add to your car.
    • Performance Exhaust Systems
      Are X-pipes and H-pipes Better Than Straight Pipes on Dual Exhaust Systems?
      You may be wondering why so many aftermarket performance exhaust system manufacturers are offering dual exhaust systems connected by "H-pipe" or "X-pipe" sections. After all, aren't two separate pipes, or so-called "true duals", the best for performance? The answer is no, but to understand why we have to examine how a typical internal combustion engine works.
    • Performance Exhaust Systems
      Power, Sound, Looks | Can I Have It All With a Cat-Back Exhaust System?
      It's an age-old question that many have asked. Will an aftermarket exhaust be worth the expense? While they definitely can be, an important question to ask yourself is do you care more about the deeper sound they’re designed to produce, or the added performance gained from being less restrictive? As car enthusiasts, we’ve become accustomed to associating the sound of a car with its exhaust. After all, doesn’t everyone have a childhood memory or two of a car and the particular sound it made?
    • Bed Accessories
      Pickup Truck Cab And Bed Sizes Are Important When Selecting Accessories
      Americans love to have choices. Buying a dress shirt? Decide solid or stripe, short or long sleeve, cotton or poly blend, button or spread collar, regular fit, slim fit, or big & tall. How about a meal at your favorite steak house? Will it be porterhouse, T-bone, or sirloin? Cooked rare, medium-rare, or medium? With baked, mashed, or French fried potatoes? Thirsty for a fancy cup of coffee? Let's not even get started on options that let you end up with a "grande caramel macchiato with 1% low-fat milk, 2 Splendas, and an extra espresso shot".
    • Replacement Exhaust Parts
      Direct Fit vs. Universal Mufflers
      Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which provides a deeper growl with increased power through freer exhaust flow, you'll see choices between "direct fit" mufflers and "universal" mufflers. In this article, we'll help you understand the differences between these two styles so you can make a more informed purchase.

    Popular Products

    1987 Ford F-250 Performance Exhaust Systems Reviews

    Average rating:  4.5  4.5 - 24 reviews
    5 of 5
    Just What I Needed
    As described and at the right price. Easy, fast delivery. A great buy!
    SPosted by Susan (Smith River, CA) /
    Was this review helpful for you? Yes1  person found this review helpful.
    View More
    Related 1987 Ford F-250 Pages
    1987 Ford F-250 Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.