1983 Chevy S-10 Blazer Performance Suspension

Change Vehicle
1 - 60 of 298 results
show:
sort by:
    • (0 reviews)
      # 14421925
      Chevy S-10 Blazer 2.8L 2 Doors 1983, Lowering Kit by Belltech®. Belltech lowering kits give your vehicle an aggressive look while retaining factory ride quality. Kits for more than 2” of drop include replacement coil springs,...
      Belltech lowering kits give your vehicle an aggressive look while retaining factory ride qualityKits for more than 2” of drop include replacement coil springs, leaf springs, hangers, rear shackles
      $169.30 - $596.30
    • (0 reviews)
      # 60365347
      Chevy S-10 Blazer 4WD (Four Wheel Drive) 1983, Master™ Front and Rear Lift Kit by Superlift®. Superlift's Product Development staff, arguably the industry's most experienced and talented group, utilizes the latest computer...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $573.95
    • (0 reviews)
      # 86959311
      Chevy S-10 Blazer 1983, 3" Body Lift Kit by Performance Accessories®. Performance Accessories 3-inch Body Lift Kit PN-PA543 raises the vehicle for adding larger diameter tires, without altering the factory suspension system and OE...
      $129.53
    • (0 reviews)
      # 139120295
      Chevy S-10 Blazer RWD (Rear Wheel Drive) With more than 8.5" from Top of Leaf to Bottom of the Frame 1983, SlamAir Air Suspension Spring Kit by Air Lift®. This is a set of two rear adjustable secondary air support springs designed...
      Set of two adjustable secondary air support springsRestores up to 2000 pounds of leveling capacity to vehicles that have lost suspension travel due to being lowered 2 to 6 inches
      $324.45 - $1,450.00
    • (0 reviews)
      # 13325983
      Chevy S-10 Blazer 1983, Rear Coil to Air Suspension Conversion Kit by Firestone®. Includes: Brackets, Air Springs, Hardware, Air Line, Inflation Valves. If you own a vehicle with rear coil spring suspension, you may have noticed...
      Keeps the vehicle level under all load conditionsMaintains all the factory hardware and suspension geometry
      $273.25
    • (0 reviews)
      # 40504548
      Chevy S-10 Blazer 1983, 4600 Series 46mm Monotube Driver or Passenger Side Shock Absorber for Stock Height Vehicles by Bilstein®, 1 per Pack. Finish: Yellow Paint. Bilstein 4600 Series Shock Absorbers and Struts are designed...
      Monotube gas pressure technologyEasy to install; direct bolt-on; no modification required
      $75.87 - $85.64
    • (2 reviews)
      # 114725073
      Chevy S-10 Blazer 2 Doors 1983, Nitro Drop 2™ Shock Absorbers Set by Belltech®. This is hydraulic Nitro Drop 2 shock absorber that is designed for optimal performance at a range of ride heights. Low-speed compression damping has...
      Hydraulic Nitro Drop 2 shock absorberDesigned for optimal ride comfort at a range of ride heights
      $41.20 - $164.80
    • (0 reviews)
      # 114725127
      Chevy S-10 Blazer 2 Doors 1983, Street Performance Shock Absorbers Set by Belltech®. This is oil-filled Street Performance shock absorber with a range of ride height choices. Upon installation, spacers mount below your spring to...
      Oil-filled Street Performance shock absorberOffers a range of ride height choices
      $55.20 - $228.80
    • (0 reviews)
      # 17929320
      Chevy S-10 Blazer For Towing Hauling 1983, Max-Air™ Rear Load Adjusting Shock Absorbers by Monroe®. Quantity: 2 per Pack. Length: 14.625" Compressed, 24" Extended with 9.375" Stroke. With Rubber Dust Shield. With Compressed...
      Monotube, Air Adjustable internal designProvide proper vehicle ride height when additional weight is loaded
      $62.72
    • (0 reviews)
      # 17923248
      Chevy S-10 Blazer 1983, Monro-Matic Plus™ Driver or Passenger Side Shock Absorber by Monroe®. Quantity: 1 per Pack. Without Extended Hydraulic Lockout. Nitrogen gas charged Monro-Matic Plus shocks and struts feature VPV (velocity...
      Twin-Tube internal designAn ideal balance of comfort and control for any driving condition
      $18.83 - $23.06
    • (0 reviews)
      # 17921809
      Chevy S-10 Blazer 1983, Reflex™ Driver or Passenger Side Shock Absorber by Monroe®. Quantity: 1 per Pack. Without Extended Hydraulic Lockout. These shocks and struts are designed for SUVs, light trucks, and other vehicles with a...
      Monotube internal designASD Technology: provides greater control for handling (only applies to twin tube version)
      $41.95 - $53.12
    • (0 reviews)
      # 17914810
      Chevy S-10 Blazer For Towing Hauling 1983, Sensa-Trac™ Load Adjusting Shock Absorbers by Monroe®. Quantity: 2 per Pack. With Metal Dust Shield. With Extended Bumper Stop. Without Extended Hydraulic Lockout. These shocks feature...
      Monotube internal designImproves ride and handling and helps maintain ride height when additional weight is loaded
      $60.16 - $99.21
    • (0 reviews)
      # 89740116
      Chevy S-10 Blazer with Quad Shocks 1983, ES Series Non-Adjustable Shock Absorber by Pro Comp®. 1 per Pack. Without Remote Reservoir. Pro Comp shocks are the number one choice when it comes to high performance shocks for your light...
      Twin-Tube internal designTuned for Specific Applications
      $32.99 - $43.99
    • (0 reviews)
      # 89735258
      Chevy S-10 Blazer 1983, MX6 Monotube Adjustable Rear Driver or Passenger Side Shock Absorber for 4" Lifted Vehicles by Pro Comp®. 1 per Pack. Without Remote Reservoir. Finish: White. With Boot. Upper Mount: Factory. Lower Mount:...
      6-way external ride control adjustabilityOne-piece billet end adjuster assembly with the heavy duty steel adjuster cam knob.
      $103.99
    • (0 reviews)
      # 14170833
      Chevy S-10 Blazer 1983, RS5000™ Passenger or Driver Side Shock Absorber for Stock Lifted Vehicles by Rancho®. 1 Per Pack. Piston Diameter: 1-3/8". Not Compressed not Extended Bumper Stop. Rancho® RS5000™ shocks have been the...
      Twin-Tube internal designTen-stage velocity sensitive valving: Provides tuning specific for each vehicle
      $50.99
    • (0 reviews)
      # 82228983
      Chevy S-10 Blazer 1983, RS9000XL™ Passenger or Driver Side Shock Absorber for Stock Lifted Vehicles by Rancho®. Finish: Liquid Metallic. 1 Per Pack. Includes: Dust Shield. Piston Rod Diameter: 0.71". Body Diameter: 2.75". Not...
      Triple-Tube internal designLarge, tri-tube body: Increased fluid capacity to operate cooler
      $110.99
    • (0 reviews)
      # 60365352
      Chevy S-10 Blazer 1983, Superide™ Driver or Passenger Side Shock Absorber by Superlift®. 1 per Pack. Includes: Single shock absorber with bushings and sleeves. Superide shock absorbers are designed to provide exceptional ride...
      Twin-Tube internal designPrecision engineered for your vehicle
      $39.92
    • (0 reviews)
      # 17815448
      Chevy S-10 Blazer 1983, MonoMax™ Driver or Passenger Side Shock Absorber by KYB®. Quantity: 1 per Pack. Power up your truck's suspension performance with MonoMax heavy duty monotube gas hydraulic shocks and struts. Thanks to the...
      Performance upgrade for trucks that need extra controlThe best choice for hauling, towing, or plowing
      $60.71 - $72.65
    • (0 reviews)
      # 98661870
      Chevy S-10 Blazer RWD (Rear Wheel Drive) 1983, Performance Driver or Passenger Side Shock Absorber by Fabtech®. Quantity: 1 per Pack. Fabtech Performance Shocks have been designed to work in conjunction with each of our suspension...
      Twin-Tube internal design9/16" Hardened Chrome Piston Rod
      $51.90 - $52.22
    • (1 review)
      # 85623465
      Chevy S-10 Blazer RWD (Rear Wheel Drive) 1983, Drag Race Shock Absorber by Competition Engineering®. 1 per Pack. 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track...
      Monotube internal designDesigned to deliver performance
      $64.86 - $65.49
    • (0 reviews)
      # 79721270
      Chevy S-10 Blazer 1983, HiJackers™ Air Adjustable Rear Shock Absorbers by Gabriel®. Quantity: 2 per Pack. Length: 14.79" Collapsed, 24.27" Extended with 9.48" Stroke. Upper Mount Code: BP14. Lower Mount Code: ES34. With Steel...
      Monotube, Air Adjustable internal designChrome-plated piston rod construction and deluxe wiper seals provide optimum sealing
      $73.16
    • (0 reviews)
      # 79726321
      Chevy S-10 Blazer 1983, Load Carrier™ Constant-Rate Coilovers by Gabriel®. Quantity: 2 per Pack. The Spring Assist (Load Carrier™) by Gabriel® is the perfect combination of shock and spring technology to help reduce the loss...
      Twin-Tube internal designA super-finished chromed piston rod to inhibit corrosion, ensure proper seal lubrication, and provide a more consistent wear surface
      $75.14
    • (0 reviews)
      # 79726328
      Chevy S-10 Blazer 1983, MaxControl™ Premium Monotube Driver or Passenger Side Shock Absorber by Gabriel®. Quantity: 1 per Pack. With Rubber Dust Tube. On paper or pavement, you won’t find a more comfortable shock than the...
      Monotube internal designNew rod guide bearing allows greater sensitivity and response
      $54.08
    • (0 reviews)
      # 97079090
      Chevy S-10 Blazer 1983, Trekmaster Series™ Front Driver or Passenger Side Shock Absorber by Tokico®. Quantity: 1 Per Pack. TOKICO suspension strut is designed to meet the growing demand of modern vehicles for tough bottoming...
      Twin-Tube internal designHigh performance quality
      $82.61 - $98.02
    • (0 reviews)
      # 171397291
      Chevy S-10 Blazer 1983, EZ-990 Helper Springs by Hellwig®. Add up to 2000 lbs. carrying capacity. This is a set of secondary helper leaf springs that adds 2,000 pounds of load support to restore comfort and stability at the rear...
      Set of secondary leaf springs designed to work with OEM leaf springs and support extra loadsAdds up to 2,000 pounds of load support and leveling capacity to the rear of your vehicle
      $116.95
    • (1 review)
      # 171399562
      Chevy S-10 Blazer 1983, Medium Duty Helper Springs by Hellwig®. This is Hellwig’s most value-priced set of secondary helper leaf springs that adds 500 pounds of load support to restore comfort and stability at the rear of your...
      Set of secondary leaf springs designed to work with OEM leaf springs and support extra loadsAdds up to 500 pounds of load support and leveling capacity to the rear of your vehicle
      $51.73 - $152.23
    • (0 reviews)
      # 139120219
      Chevy S-10 Blazer 1983, Air Springs by Air Lift®. This is a set of two adjustable secondary air helper springs designed to add up to 2,000 pounds of leveling capacity for vehicles with leaf springs. Kit adds ride comfort and...
      Set of two air bag spring supports designed to work with factory OEM leaf springsAvailable in front and rear sets sized for your make and model specifically
      $307.97 - $1,450.00
    • (0 reviews)
      # 77876879
      Chevy S-10 Blazer 1983, Air Helper Spring Kit by Firestone®. Mount inside an existing open coil spring suspension. These air springs provide adjustable spring rates far superior to the standard coil spring. The durable polyurethane...
      Control the air pressure in the air helper springs for varying loads and road conditionsSpring performance can be altered as easily as inflating a tire
      $100.39 - $863.43
    • (0 reviews)
      # 14259598
      Chevy S-10 Blazer 1983, SES Rubber Helper Spring Kit by Timbren®. Quantity: 2 per Pack. Includes: 2 Aeon® Rubber Springs, Vehicle-Specific Brackets, All Hardware. Material: Rubber. SES Suspension Upgrades are engineered to provide...
      Improves Ride and HandlingEliminates Trailer Sway and Roll
      $214.67
    • (0 reviews)
      # 55514186
      Chevy S-10 Blazer RWD (Rear Wheel Drive) 2 Doors 1983, Anti-Sway Bars by Belltech®. Boost the handling of your vehicle to more sophisticated levels with premiere one-piece sway bar from Belltech. Balanced for neutral steering and...
      Anti-sway bars effectively decrease suspension lean and side-to-side body roll around turnsSway bars are crafted from cold-formed solid steel for consistent thickness, yield strength, and lighter weight
      $172.00 - $363.20
    • (0 reviews)
      # 171397297
      Chevy S-10 Blazer 1983, Front Sway Bar for 2" Body Drop by Hellwig®. Diameter: 1.25". Each application effectively reduces side-to-side body roll around turns, enhances tire grip, and optimizes vehicle stability at higher speeds....
      Designed to provide optimum performance on lowered vehicles as well as lifted trucks with a higher center of gravityReduces side-to-side body roll around turns, enhances tire grip, and optimizes stability at higher speeds
      $176.48
    • (0 reviews)
      # 114722302
      Chevy S-10 Blazer 2.8L RWD (Rear Wheel Drive) 2 Doors 1983, Front Pro™ Lowering Kit with 2"-3" Front Body Drop by Belltech®. Includes: 2 Coil Springs, 2 Lift Spacers. This is a set of replacement front coil springs designed for...
      Set of coil springsRide height can be easily adjusted to only 1” of drop by the use of height-boosting urethane spacer pieces
      $144.20
    • (0 reviews)
      # 54871556
      Chevy S-10 Blazer 2.8L RWD (Rear Wheel Drive) 2 Doors 1983, Rear Lowering Leaf Spring with 3" Rear Body Drop by Belltech®. Includes: 1 Leaf Spring and Bushings. Quantity: 1 per Pack. This is one replacement leaf spring curved...
      One replacement leaf spring curved specifically to lower the ride height of your rear suspensionReplace worn and/or deteriorated factory leaf springs
      $119.50
    • (0 reviews)
      # 85049460
      Chevy S-10 Blazer 4WD (Four Wheel Drive) 1983, Gas-Magnum™ Front Steering Stabilizer Replacement Cylinder by Monroe®. Quantity: 1 per Pack. Length: 12" Compressed, 19.5" Extended with 7.5" Stroke. Without Dust Shield. Without...
      Offers superior comfort and extra control when operating conditions get more demandingStops vibration before it gets to the driver
      $26.45
    • (0 reviews)
      # 72207307
      Chevy S-10 Blazer 4WD (Four Wheel Drive) 1983, ES2000 Front by Pro Comp®. The ES2000 steering stabilizer is specifically engineered to improve handling characteristics and to reduce wheel vibration, which leads to suspension...
      Includes Pro Comp ES2000 Stabilizer ShocksProudly made in United States
      $37.99 - $69.99
    • (0 reviews)
      # 14168521
      Chevy S-10 Blazer 4WD (Four Wheel Drive) without OEM Steering Damper Mounts 1983, Front Steering Single Damper by Rancho®. Finish: Liquid Metallic. Includes: Steering Damper and Shock and Mounting Hardware. Steering Stabilizer...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $87.99
    • (0 reviews)
      # 82228979
      Chevy S-10 Blazer 4WD (Four Wheel Drive) 1983, RS5000™ Front Steering Stabilizer by Rancho®. 1 Per Pack. Length: 19.45" Extended, 12.27" Collapsed with 7.18" Stroke. Includes: Dust Shield, Protective Boot. Piston Diameter:...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $54.99
    • (0 reviews)
      # 82228980
      Chevy S-10 Blazer 4WD (Four Wheel Drive) 1983, RS7000MT™ Front Steering Stabilizer by Rancho®. 1 Per Pack. Length: 19.3" Extended, 12.2" Collapsed with 7.1" Stroke. Not Includes: Dust Shield. Not Compressed not Extended Bumper...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $84.99
    • (0 reviews)
      # 55373120
      Chevy S-10 Blazer 4WD (Four Wheel Drive) 1983, SX5000 Steering Stabilizer by Tuff Country®. Tuff Country EZ-Ride’s Dual SX5000 steering stabilizers are designed for the aggressive off-roader with large oversized tires looking to...
      Improves handling characteristicsReduces or eliminates steering shimmy
      $9.02 - $196.57
    • (0 reviews)
      # 13360633
      Chevy S-10 Blazer 2.0L RWD (Rear Wheel Drive) 1983, Traction Bars by Lakewood®. Finish: Black Powder Coated. Material: Steel. Sold as Pair. Includes: Polyurethane Snubbers. Bolt On Installation. Stabilize Rear End. Reduces Spring...
      Engineered to exceed OEM quality standardsImproves your vehicle's handling
      $158.95
    • (0 reviews)
      # 87490684
      Chevy S-10 Blazer 1983, Rear Torque Bars by Warrior®, 2 per Pack, U-Bolts Up, Gray. Perfect for lifted and modified suspensions, Torque Bars can improve ride ability in both on and off-road conditions. Torque Bars help prevent leaf...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $247.33
    • (0 reviews)
      # 11083916
      Chevy S-10 Blazer RWD (Rear Wheel Drive) 1983, Front Bump Stops by Energy Suspension®. Quantity: 2 per Pack. Material: Polyurethane. Bump Stops from Energy Suspension are designed to provide necessary protection against damaging...
      High-density black polyurethane construction provides a superior cushioning effect and resists degrading, drying, and crumbling the way rubber bushings doPolyurethane bump stops prevent hard impacts and damage when the end of suspension travel is reached
      $7.25
    • (0 reviews)
      # 11083909
      Chevy S-10 Blazer 1983, Body Cab Mount Set by Energy Suspension®. Performance. Material: Polyurethane. Upgrade and replace all the rubber mounts and bushings that have become degraded between the body and frame of your vehicle with...
      Kit features replacement polyurethane pieces for all original rubber mounts and bushings between your vehicle’s body and frameHigh-density polyurethane construction provides a superior cushioning effect and resists degrading drying up and crumbling the way rubber mounts can
      $131.94
    • (0 reviews)
      # 11076740
      Chevy S-10 Blazer 1983, Front Control Arm Bushings by Energy Suspension®. Performance. Material: Polyurethane. Energy Suspension lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for...
      See Product Options for replacement bushing kits for lower and upper control arms, torsion arms, trailing arms, and track armsHigh-density polyurethane construction provides a superior cushioning effect and resists drying up and crumbling the way rubber mounts can
      $37.50 - $69.67
    • (0 reviews)
      # 11083953
      Chevy S-10 Blazer 1983, Front Sway Bar Bushings by Energy Suspension®. Performance. Material: Polyurethane. These are sets of replacement polyurethane bushings designed to exceed factory OEM levels of vibration dampening and...
      Set of replacement polyurethane sway bar bushings (designed for front or rear applications) that meet or exceed OEM levels of vibration dampening refinementChoose the Front or Rear set that includes reinforced, zinc-coated outer steel mounting sleeves, or individual bushings-only sets
      $17.60 - $30.06
    • (0 reviews)
      # 54871969
      Chevy S-10 Blazer 2.8L 4WD (Four Wheel Drive) 2 Doors 1983, Lowering Torsion Keys with 1"-3" Front Body Drop by Belltech®. Includes: Torsion Bar Keys. Quantity: 2 per Pack. This is a front lowering kit for vehicles with front...
      Includes two torsion bar keys to reposition torsion barsKeys can be adjusted to multiple positions to lower front ride height
      $128.50
    • (1 review)
      # 131271067
      Chevy S-10 Blazer 1983, Lowering Kit by Belltech®. Includes: Rear Lowering Blocks, Hardware. Belltech lowering kits give your vehicle an aggressive look while retaining factory ride quality. Kits include Drop Ball Joint, Drop...
      Belltech lowering kits give your vehicle an aggressive look while retaining factory ride quality2” drop kits include Drop Ball Joint, Drop Spindle, Rear Aluminum Lowering Blocks, and Rear Shackles
      $34.20 - $48.60
    • (0 reviews)
      # 109496077
      Chevy S-10 Blazer 4WD (Four Wheel Drive) 1983, Non-Tapered Rear Lift Blocks and U-Bolt Kit with 1.5" Rear Lift Height by Tuff Country®, 2 per Pack. Block Size: 1.5" (H) x 2.5" (W) x 4.5" (L). Includes: U-Bolts. Tuff Country’s...
      Economical lift solution for rear of vehiclesKits include (2)Lift Blocks, (4)U-bolts and hardware
      $68.12
    • (0 reviews)
      # 55514234
      Chevy S-10 Blazer RWD (Rear Wheel Drive) 2 Doors 1983, Front Coil Spring Spacers by Belltech®. This height-boosting urethane spacer designed to lift your vehicle. Use it underneath drop springs or OEM factory springs when height...
      Set of height-boosting urethane spacer pieces designed to lift your vehicleSpacer pieces mount underneath coil springs and are removable to restore natural ride height
      $37.10
    • (0 reviews)
      # 92940563
      Chevy S-10 Blazer Without Air Lift1000 Air Helper Springs 1983, SmartAIR II™ Automatic Leveling System by Air Lift®. Dual Path. Includes: Electronic Height Sensor (EHS)(2), Compressor(2), Exhaust Solenoid Assembly(2), Harness(2),...
      $864.44
    • (0 reviews)
      # 88874009
      Chevy S-10 Blazer 1983, Air-Command™ Suspension Air Compressor by Firestone®. Firestone manufactures and provides air suspension products for wide variety of vehicles to provide you with a better ride and safe load-carrying...
      Tested to outperform all comparable products on the marketMade from premium materials to endure years of abuse
      $59.16 - $275.91
    • (0 reviews)
      # 13326499
      Chevy S-10 Blazer 1983, Air-Rite™ Air Command Compressor System by Firestone®. Provide instant control of the air helper springs from within the vehicle. Air-Rite™ systems allow quick inflation and deflation for various road...
      Instant adjustability of your air helper springsIncreased life of the air helper springs
      $204.06 - $863.43
    • (0 reviews)
      # 92943886
      Chevy S-10 Blazer 1983, Load Controller by Air Lift®. LoadController systems are air compressors that mount permanently on the frame of your vehicle to give you spring inflation pressure wherever you go. Adjustment of your springs...
      Dual-path design compressors allow left- or right-side springs on the same axle to be controlled independently of each otherHeavy-duty strength compressors are recommended for daily or commercial use, run quieter, and provide better filtration
      $231.75 - $427.45
    • (1 review)
      # 92943908
      Chevy S-10 Blazer 1983, Wireless Control by Air Lift®. These kits include a compact wireless remote control and all the equipment you need to adjust the pressure in two air springs on the same axle. Wireless remote control features...
      Equal Air Spring Inflation kit contains a standard air compressor that adjusts left and right springs together at the same time to the same pressureSeparate Air Spring Inflation kit contains a heavy duty air compressor with separate lines that allows individual adjustment of left and right springs
      $378.53 - $524.99
    • (0 reviews)
      # 72205950
      Chevy S-10 Blazer 1983, Short Style Rear Add-A-Leafs with 1.5"-2.5" Rear Lift Height by Pro Comp®. 2 per Pack. Pro Comp carries a wide range of accessories to support your suspension system. From heavy duty traction bars to high...
      Rear add-a-leaf kitProudly made in United States
      $35.99
    • (0 reviews)
      # 55373117
      Chevy S-10 Blazer 1983, Add-A-Leafs with Lift Height by Tuff Country®, 2 per Pack. Includes: Two Add-A-Leafs, Two Center Pins. Tuff Country add-a-leafs are an economical solution to lifting vehicles with leaf springs. These...
      Add-a-leafs are an economical method of lifting vehicles with leaf springsStrengthens old, weak leaf springs
      $74.60 - $97.36
    • (0 reviews)
      # 14261883
      Chevy S-10 Blazer 1983, Rear Add-A-Leaf Kit by Superlift®. Long. Includes: 2 Single Leafs And Tie-Bolts. Superlift's Product Development staff, arguably the industry's most experienced and talented group, utilizes the latest...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $84.05
    • (0 reviews)
      # 13290688
      Chevy S-10 Blazer RWD (Rear Wheel Drive) 1983, Rear Add-A-Leafs with 1.5" Rear Lift Height for PN K2108, K2108M, K2109, K2109M, K2164, K2164M, K2166, K2166M, K2168, K2168M, K2170, K2170M by Fabtech®. Quantity: 2 per Pack. Proper...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $67.77
    • (0 reviews)
      # 13292013
      Chevy S-10 Blazer 1983, Rear Lifted Shackle Kit with 2" Rear Lift Height by Fabtech®. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with...
      Precision engineered for your vehicleTested to outperform all comparable products on the market
      $78.31
    • (0 reviews)
      # 13903794
      Chevy S-10 Blazer 1983, Front Leaf Spring Lifted Shackles by Warrior®, 2 per Pack. This unique suspension system comes complete with lock nuts, polyurethane bushings, drilled sleeves (where applicable) and hardened bolts with...
      Easy InstallationImmediate Lift To Clear Oversize Tires
      $79.95 - $131.59




    Guides & Articles

    • Off-Road Bumpers
      Skid Plates Provide The Ultimate In Off-Road Protection
      If you take your 4x4 off-roading, you have likely gained an appreciation of how unforgiving trails can be when it comes to your vehicle's underside. Deep ruts with rough edges can appear out of nowhere, sturdy-looking rocks can shift unexpectedly, and tranquil bodies of water can hide everything from sinkholes to fallen tree trunks. Before you know it, the underside of your truck has bounced off something hard enough to damage moving suspension components or puncture housings containing engine oil, gasoline, transmission fluid, or differential gear oil.
    • Performance Suspension Parts
      How much lift is needed for larger tires on my 2007-up Jeep Wrangler?
      Twenty years after the first Jeep Wrangler model debuted in 1987, third-generation Wranglers were introduced for the 2007 model year. Unlike any previous Wranglers or CJs, a 4-door Unlimited model (known internally as the "JKU" body) was offered alongside the standard 2-door ("JK" body). Because it took the off-road capability Wranglers are known for and broadened it with the practicality of 4 doors for those needing a family vehicle, third-generation Wranglers have proven very successful in the marketplace. Maintaining Jeep tradition, this Wrangler appeals by offering a higher-than-average number of advantages for the 4x4 enthusiast, whether it's used for rock crawling or as an everyday driver.
    • Performance Suspension Parts
      Coilovers Are Pricey - Why Would I Spend My Money For Them?
      When first glancing through the Performance Coilover Kits section of our website, you may be put off by some of the prices you see. After all, what are you buying other than a combo set of springs and shocks under some fancy name? Certainly, you ask yourself, can't you purchase springs and shocks separately and monetarily come out ahead?
    • Performance Suspension Parts
      Body Lifts & Suspension Lifts From 2 to 10 Inches | What are my Lift Kit Choices?
      Has this happened to you? You catch a glimpse of a truck like yours in a parking lot or around town that, for some reason, you like better than your own. It seems to have a stance that's more rugged-looking and more suited to a 4x4 than yours does. Maybe you get a chance to stop and take a closer look immediately, or maybe it's days or weeks before you see the other truck again.
    • Automotive Tools
      What Special Tools Are Available For Suspension Repair?
      Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
    • Performance Suspension Parts
      Coil, Leaf, & Torsion Bar | Describing The 3 Different Kinds of Springs
      The springs in your vehicle probably aren't something you think about until there's a problem or you've decided to upgrade suspension parts in the interest of sportier handling. But what specifically do springs do? In short, they play a major role in the safe handling and ride comfort of your vehicle. Not only do they keep a vehicle at a designated standing height, they provide recoil necessary to bounce back after suspension components move up and down over uneven road surfaces. By themselves, springs will continue to bounce up and down for a long time unless a motion damper such as a shock absorber is present to keep things stable. Springs can be soft and extremely bouncy, or they can be stiffer and less bounce-prone.
    • Performance Suspension Parts
      How Do Shock Absorbers Work?
      Shock absorbers (also known as "shocks") are the suspension components which slow, then stop, the up-and-down bouncing movement of your vehicle's springs through a process known as dampening. Without shocks to calm things down, springs will continue to extend and release energy they absorb from bumps in the road at an uncontrolled rate - bouncing for a long time until their kinetic energy finally dissipates. Needless to say, this would produce an extremely bouncy ride that would be hard to control over uneven road surfaces.
    • Performance Transmission Parts
      Suspension Enhancements Will Raise The Rear Of Your Tow Vehicle
      If you are using your "daily driver" car or truck for occasional towing duty, you are looking for that ideal sweet spot where the weekday commute is comfortable and quiet, and the weekend trailering feels solid and secure. In other words, you don't want to vehicle to feel too "stiff" during the week, nor do you want it to ride "soft" when pulling a trailer.
    • Wheels & Rims
      Stanced Wheels, Demon Camber | How Do I Get That Look?
      Stanced. Demon camber. You may know it as oni-camber. You've seen the look, and whether you like it or not is totally beside the point. The great thing about this stanced look is that it gets your attention. From the interviews we've read with owners and drivers of these machines, that is exactly what they are after. They've said that it's all about being noticed.
    • Performance Suspension Parts
      Stock vs Performance Suspension
      Very often we don't even realize what a crucial role a car's suspension plays in providing a safe and comfortable ride. The system maximizes the friction between the road surface and your vehicle's tires, ensuring steering stability along with responsive handling.
    • Performance Suspension Parts
      Shocks Versus Struts: The Big Answers Revealed!
      Shock absorbers, also known simply as “shocks” (which is what we will call them for the rest of this article), are the suspension components which stop your car or truck from bouncing up and down after hitting a bump. They are a major contributor to your ride comfort and safety.
    • Replacement Suspension Parts
      How to Inspect Your Suspension System
      The very first thing to know about timely suspension system diagnosis is that the stability and steering control of your vehicle and, what is more important, your safety on the road depends on how often you make it. Automotive suspension belongs to one of those car systems that are constantly exposed to high loads and thus are prone to wear and tear. Most specialists recommend inspecting suspension system after every 6,500-7,500 miles or when there are any signs of its breakage.
    • Performance Suspension Parts
      How Low Can You Go?
      Lowering is high on the list of many people who want to improve the appearance of their car. If you want to lower your car with the coil springs, then replacing them with lowering springs is the way to go. But what if you want to lower your car and also make it handle better? If that’s your goal then consider coil-over shocks.

    Popular Products

    1983 Chevy S-10 Blazer Performance Suspension Reviews

    Average rating:  5  5 - 12 reviews
    5 of 5
    Great Tubes
    Fit great and are heavy duty.
    DPosted by David (Albuquerque, NM) /
    Was this review helpful for you? Yes
    View More
    Related 1983 Chevy S-10 Blazer Pages
    1983 Chevy S-10 Blazer Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.