1982 Ford F-250 Exhausts

1 - 60 of 17801 of 03
show:
sort by:
    • (0 reviews)
      $877.40$701.92
      Ford F-250 289 / 302 CID 1982, Scavenger Series Elite Shorty Header by Flowmaster®. Replace your restrictive factory exhaust manifolds with these stainless steel headers and let your engine breath! Their long tube design will...
      # 15657849
    • (0 reviews)
      $165.96$132.77
      Ford F-250 4.9L / 5.0L 1982, Direct Fit Federal Catalytic Converter by MagnaFlow®. 3" Inlet / 3" Outlet Diameter. 30" Wide. If your car needs replacement, install one that will get you through the smog check and give you more...
      # 22198297
    • (0 reviews)
      $159.23$127.38
      Ford F-250 4.9L / 5.0L / 5.8L 1982, Direct Fit Undercar Catalytic Converter by Eastern Catalytic®. 38" Overall Length. Standard. 2.5" ID. 2.25" OD. Number of Clamps: Three Clamps. If you need to replace your failed or damaged...
      Direct OEM replacementConverts harmful engine emissions to less dangerous gases and water vapor
      # 17569064
    • (0 reviews)
      $101.65$81.32
      Ford F-250 Gas 1982, 40 Series Delta Force™ Aluminized Steel Muffler by Flowmaster®, AGGRESSIVE SOUND, 2.25" Offset Inlet / 2.25" Center Outlet, 4" Thick x 9.75" Wide x 13" Case Length x 19" Overall Length. This is the muffler...
      # 849817
    • (0 reviews)
      $108.85$87.08
      Ford F-250 Gas 1982, 40 Series Original Stainless Steel Muffler by Flowmaster®, AGGRESSIVE SOUND, 2.25" Offset Inlet / 2.25" Center Outlet, 4" Thick x 9.75" Wide x 13" Case Length x 19" Overall Length. This is the muffler that...
      # 849816
    • (0 reviews)
      $150.83$120.66
      Ford F-250 1982, 50 Series Delta Flow™ Stainless Steel Muffler by Flowmaster®, MODERATE SOUND, 2.25" Offset Inlet / 2.25" Center Outlet, 4" Thick x 9.75" Wide x 17" Case Length x 23" Overall Length. The 50 Series Delta Flow...
      # 848168
    • (0 reviews)
      $104.88from $83.90 - $94.44
      Ford F-250 1982, Super 44 Series Delta Flow™ Muffler by Flowmaster®, AGGRESSIVE SOUND, 2.25" Offset Inlet / 2.25" Center Outlet, 4" Thick x 9.75" Wide x 13" Case Length x 19" Overall Length. The Super 44 has the deepest, richest,...
      # 850089
    • (0 reviews)
      $170.50$136.40
      Ford F-250 5.0L / 5.8L / 6.6L 1982, Super 50 Series Delta Flow™ (SUV) Aluminized Steel Performance Muffler by Flowmaster®, MILD SOUND, 2.25" Offset Inlet / 2.25" Center Outlet, 5" Thick x 10" Wide x 17" Case Length x 23" Overall...
      # 848232
    • (0 reviews)
      $7.38from $5.90 - $11.80
      Ford F-250 1982, Exhaust Header Gaskets by Spectre Performance®. Rooted in racing, Spectre Performance designs and builds every product with the same goal in mind - the best performance in the market proven on the racetrack! All...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      # 12054488
    • (0 reviews)
      $40.63$32.50
      Ford F-250 5.0L / 5.8L 1982, Exhaust Header Gasket by COMP Cams®. Header Gasket; Small Block Ford; 1.30in.x 1.60in.
      # 14325628
    • (0 reviews)
      $83.20$66.56
      Ford F-250 4.9L 1982, 220 Series Stainless Steel Oval Catalytic Converter by Flowmaster®, 2.25" Inlet / 2.25" Outlet. 14" Length. 6.13" Width. Includes Heat Shield, Air Tube, 4 Bolt Flanges. Without Hangers. The new Flowmaster...
      # 869916
    • (0 reviews)
      $131.90from $105.52 - $124.70
      Ford F-250 1982, 290 Series Stainless Steel Oval Catalytic Converter by Flowmaster®. 7.25" Width. The new Flowmaster replacement catalytic converters are made to meet and exceed all federal environmental regulations and, as all...
      # 34450379
    • (0 reviews)
      $101.50from $81.20 - $175.49
      Ford F-250 1982, Exhaust Manifold by Dorman®, 1 per Pack, 1 per Pack. Material: Cast Iron. With Installation Hardware. More like a complete kit than a single part, many of the Exhaust Manifolds include gaskets and hardware for a...
      Includes heat-shield for protection of hoses, wiring, and other engine componentsCast iron or stainless tubular construction protects against warping and/or cracking
      # 16498337
    • (0 reviews)
      $158.30$126.64
      Ford F-250 1982, Direct Fit Catalytic Converter by Walker®. Body Dimensions - 10" L x 6.125" W x 4.25" H, Material - SS (Body) / Ceramic (Substrate), Body Shape - Standard Oval, Direct Fit, Connection Type - Pipe Inlet and Outlet...
      Emission Warranty: 5 Years / 50,000 Miles (80,000 Kilometers)Structural Warranty: 5 Years / 50,000 Miles (80,000 Kilometers)
      # 35428586
    • (0 reviews)
      $83.74from $66.99 - $119.75
      Ford F-250 1982, Universal Catalytic Converter by Walker®. This part features the correct load of precious metals to ensure the proper limitation of tailpipe emissions. It is designed to meet the EPA policy and emission reduction...
      Constructed to meet your vehicle’s specific emissions requirementsFeatures stainless steel body with aluminized steel pipe and heat shields
      # 17728560
    • (0 reviews)
      $105.44$84.35
      Ford F-250 V8 1982, Heavy Duty Muffler by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose...
      Makes installation quick and easyAn economical replacement for OE components
      # 35464408
    • (0 reviews)
      $76.91from $61.53 - $63.77
      Ford F-250 1982, Quiet-Flow Muffler by Walker®. Together with delivering OE-style sound, the Quiet-Flow Muffler features 100% structural stainless steel construction that resists rust three times longer than aluminized mufflers...
      Designed for OE equivalent sound and precision fitSpun-locked heads for a proper resistance to backfire
      # 35464429
    • (0 reviews)
      $55.69from $44.55 - $44.56
      Ford F-250 1982, SoundFX Direct Fit Muffler by Walker®. This muffler is the right choice if you opt for quality acoustics and performance. Walker offers 100% aluminized steel SoundFX Mufflers with direct fit and universal fit...
      Designed to deliver ultimate performance and pleasing sound qualityOE-equivalent direct-fit design
      # 18168613
    • (0 reviews)
      $40.25$32.20
      Ford F-250 1982, SoundFX Universal Muffler by Walker®. This muffler is the right choice if you opt for quality acoustics and performance. Walker offers 100% aluminized steel SoundFX Mufflers with direct fit and universal fit...
      Designed to deliver ultimate performance and pleasing sound qualityUniversal fit – may require a few modifications to install
      # 18173302
    • (0 reviews)
      $43.60$34.88
      Ford F-250 1982, Tru-Fit Universal Muffler by Walker®. The Tru-Fit Universal Muffler is designed to provide installers and DIY users with optimum performance and quality acoustics at an affordable price. This 100% aluminized steel...
      Economical performance and acousticsUniversal fit allows for greater installation flexibility
      # 18181356
    • (0 reviews)
      $81.85$65.48
      Ford F-250 L6 1982, Front Pipe by Walker®. If you want exhaust piping that delivers precise OE-style fit, appearance, and reliability, this part is your number one choice. Every pipe is vehicle-specific and is manufactured using...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      # 18133667
    • (0 reviews)
      $11.41from $9.13 - $9.19
      Ford F-250 1982, Intermediate Pipe by Walker®. If you want exhaust piping that delivers precise OE-style fit, appearance, and reliability, this part is your number one choice. Every pipe is vehicle-specific and is manufactured...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      # 18155402
    • (0 reviews)
      $83.06from $66.45 - $67.19
      Ford F-250 1982, Tail Pipe by Walker®. If you want exhaust piping that delivers precise OE-style fit, appearance, and reliability, this part is your number one choice. Every pipe is vehicle-specific and is manufactured using...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      # 18177943
    • (0 reviews)
      $104.19from $83.35 - $122.24
      Ford F-250 V8 1982, Y Pipe by Walker®. If you want exhaust piping that delivers precise OE-style fit, appearance, and reliability, this part is your number one choice. Every pipe is vehicle-specific and is manufactured using...
      Designed to directly replace the factory partMade with precision benders and fixture checked
      # 18183063
    • (0 reviews)
      $35.74from $28.59 - $29.55
      Ford F-250 5.0L 1982, Header Install Kit by Mr. Gasket®, Includes Header Exhaust/Collector Flange Gasket/Header and Collector Flange Bolts. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers...
      # 12330549
    • (0 reviews)
      $32.60from $26.08 - $28.98
      Ford F-250 V8 1982, Seal-4-Good™ Exhaust Header Gaskets by Taylor Cable®. Don’t put up with that ominous, unmistakable “tick, tick, tick” sound of an exhaust manifold leak. If it isn’t leaking air into the manifold and...
      # 9384257
    • (0 reviews)
      $20.18from $16.14 - $17.97
      Ford F-250 V8 1982, XX Carbon™ Exhaust Header Gaskets by Taylor Cable®. These extreme high-temperature gaskets are well-suited for highly-modified engines: turbocharged, supercharged, nitrous or fuel. This is a premium,...
      # 9387032
    • (0 reviews)
      $6.70$5.36
      Ford F-250 5.0L / 5.8L 1982, Metal Exhaust Manifold Studs and Nuts by Dorman®, 1 Piece. Use 2 per Car. Package Type: Card. 3/8" x 16. This is an aftermarket part that replaces factory OE # 388469, 392016S4301, 392017. Dorman’s...
      Direct replacement for a proper fit every timeDurable steel construction
      # 31530851
    • (0 reviews)
      $13.36from $10.69 - $13.78
      Ford F-250 1982, Exhaust Manifold Gasket Set by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the...
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      # 40637379
    • (0 reviews)
      $16.35from $13.08 - $26.54
      Ford F-250 1982, Exhaust Manifold Gasket by Victor Reinz®, Use 1 per Car. When you’re low on oil, coolant or some other fluid, you may be tempted to just run down to the local auto parts chain store. But before you waste your...
      # 24120048
    • (0 reviews)
      $13.36$10.69
      Ford F-250 4.9L 1982, Intake and Exhaust Manifolds Combination Gasket by Victor Reinz®, Use 1 per Car. OEM Standard. Material: Perforated Steel. Included: Heat Exchanger Gasket. When you’re low on oil, coolant or some other...
      # 24046098
    • (0 reviews)
      $9.18$7.34
      Ford F-250 1982, Muffler Strap by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose Walker...
      Makes installation quick and easyOptimal OE-style fit and quality
      # 35464424
    • (0 reviews)
      $14.36from $11.49 - $15.19
      Ford F-250 5.0L 1982, Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need...
      # 12329166
    • (0 reviews)
      $24.48from $19.58 - $33.74
      Ford F-250 5.0L 1982, Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need...
      # 12327028
    • (0 reviews)
      $33.91$27.13
      Ford F-250 5.0L 1982, MLS Exhaust Gasket by Mr. Gasket®. Rectangular Port.
      # 12304802
    • (0 reviews)
      $25.51from $20.41 - $20.71
      Ford F-250 5.0L 1982, Ultra-Seal™ Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds,...
      # 12367151
    • (0 reviews)
      $2.03from $1.62 - $2.26
      Ford F-250 1982, Clamp by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose Walker...
      Makes installation quick and easyOptimal OE-style fit and quality
      # 18124290
    • (0 reviews)
      $8.03$6.42
      Ford F-250 L6 1982, Gasket by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose Walker...
      Makes installation quick and easyOptimal OE-style fit and quality
      # 35464407
    • (0 reviews)
      $8.60$6.88
      Ford F-250 L6 4WD (Four-Wheel Drive) 133.0" Wheelbase / 155.0" Wheelbase 1982, Insulator by Walker®. 3.125" Exhaust Hanger Overall Length, 1 Inlet, 1 Outlet. With their extensive selection of accessories and hardware for the...
      Makes installation quick and easyOptimal OE-style fit and quality
      # 18149592
    • (0 reviews)
      $16.05$12.84
      Ford F-250 1982, Muffler Exhaust Heat Shield by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you...
      Makes installation quick and easyOptimal OE-style fit and quality
      # 35464419
    • (0 reviews)
      $3.80$3.04
      Ford F-250 1982, Exhaust Pipe Flange Gasket by Fel-Pro®. 2-1/32" Inner Diameter. With Separate Head Intake Manifold. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the...
      Direct OEM replacement for a proper fitEnsure reliable sealing performance
      # 18900164
    • (0 reviews)
      $10.70$8.56
      Ford F-250 4.9L / 5.0L 1982, Exhaust Pipe Flange Gasket by Victor Reinz®, Use 1 per Car. Exhaust Pipe to Catalytic Converter. Flange Gasket. / Water Pump Mounting Gasket. OEM Standard. Material: Composite. When you’re low on oil,...
      # 24042463
    • (0 reviews)
      $4.13from $3.30 - $3.86
      Ford F-250 4.9L 1982, Exhaust Seal Ring by Victor Reinz®, Use 1 per Car. Dimension: 2 Pipe. OEM Standard. ID: 2.018". OD: 2.510". Thickness: 0.63". When you’re low on oil, coolant or some other fluid, you may be tempted to just...
      # 24120021
    • (0 reviews)
      $43.01from $34.41 - $40.82
      Ford F-250 1982, Universal Fit Catalytic Converter by Eastern Catalytic®. Keep your exhaust emissions within specifications and your vehicle running in top condition with this quality product. Made of stainless steel, the catalytic...
      Universal fitConverts harmful engine emissions to less dangerous gases and water vapor
      # 54550510
    • (0 reviews)
      $22.23from $17.78 - $19.80
      Ford F-250 V8 1982, Graph-Flex™ Exhaust Header Gaskets by Taylor Cable®. These durable header flange gaskets are composed of a graphite composition material on a malleable stainless steel core. They’ll seal up tight on almost...
      # 9381142
    • (0 reviews)
      $94.53from $75.62 - $146.90
      Universal 10 Series Delta Force Single Chamber Race Muffler by Flowmaster®, AGGRESSIVE SOUND. The 10 Series Race mufflers are a compact lightweight single chamber design that will give a noticeable sound reduction compared to open...
      # 898490
    • (0 reviews)
      $209.88from $167.90 - $267.60
      Universal 30 Series Delta Force™ 3-Chamber Race Muffler by Flowmaster®, AGGRESSIVE SOUND. These are the most powerful and the quietest professional race mufflers available. 5.00” & 6.00” thick case sizes for maximum power and...
      # 898450
    • (0 reviews)
      $132.48from $105.98 - $230.86
      Universal 40 Series Delta Force™ 2-Chamber Race Muffler by Flowmaster®, AGGRESSIVE SOUND. The 40-Series mufflers offer a combination of maximum power and substantial dB-reduction compared to open headers. They are recommended for...
      # 898479
    • (0 reviews)
      $246.58$197.26
      Universal 60 Series Delta Force Stainless Steel Race Muffler by Flowmaster®, MODERATE SOUND, 4" Offset Inlet / 4" Offset Outlet, 22" Length. These are the most powerful and the quietest professional race mufflers available.
      # 3146020
    • (0 reviews)
      $390.89$312.71
      Universal Delta Force™ Aluminized Steel Low Profile Oval Tubing Race Muffler by Flowmaster®, Aggressive Sound, 3.50" Dual Inlet / 3.50" Dual Outlet, 2.75 Thick x 11" Wide x 25" Length. The low profile mufflers are Delta Flow™...
      # 898448
    • (1 reviews)
      $111.25from $89.00 - $141.66
      Universal Outlaw™ Race Muffler by Flowmaster®, AGGRESSIVE SOUND. These mufflers are very small and lightweight. Attached directly to the collector they generally produce more power than open headers, while taking “the edge”...
      # 898456
    • (1 reviews)
      $236.09$188.87
      Universal Pro Series™ Stainless Steel Race Muffler with Turn Down by Flowmaster®, MODERATE SOUND, 6" Diameter x 16" Case Length. Laminar Flow Mufflers have applications in all forms of racing. The Cool Shell Technology makes...
      # 898465
    • (0 reviews)
      $234.83from $187.86 - $208.84
      Universal Scavenger Series Outlaw II Race Collector Muffler by Flowmaster®. These Delta Force Mufflers are designed to attach directly to the exhaust header primary tubes, replacing the collector in sprint and drag racing...
      # 23297627
    • (0 reviews)
      $274.15$219.32
      Universal Scavenger Series Race Collector Muffler by Flowmaster®. These Delta Force Mufflers are designed to attach directly to the exhaust header primary tubes, replacing the collector in sprint and drag racing applications. They...
      # 898468
    • (1 reviews)
      $112.49from $89.99 - $108.08
      Universal 40 Series Delta Flow™ Muffler by Flowmaster®, AGGRESSIVE SOUND, 4" Thick x 9.75" Wide x 13" Case Length x 19" Overall Length. The 2-chamber design of this muffler, incorporating the patented Flowmaster Delta Flow...
      # 897054
    • (0 reviews)
      $108.85$87.08
      Universal 40 Series Original Muffler by Flowmaster®, AGGRESSIVE SOUND, 4" Thick x 9.75" Wide x 13" Case Length x 19" Overall Length. This is the muffler that launched the success of Flowmaster. It is an aggressive sounding...
      # 897079
    • (0 reviews)
      $222.98$178.38
      Universal 50 Series Delta Flow™ Aluminized Steel Big Block Muffler by Flowmaster®, MILD SOUND, 5" Thick x 12" Wide x 22" Case Length x 28" Overall Length. The 50 Series Big Block Muffler is Flowmaster’s largest and quietest...
      # 897082
    • (0 reviews)
      $174.45$139.56
      Universal 50 Series Delta Flow™ Slimline Muffler by Flowmaster®, MODERATE SOUND. The 50 Series Delta Flow Slimline mufflers are designed for passenger cars. The sound characteristics are moderate exterior sound level and minimal...
      # 897156
    • (0 reviews)
      $193.74from $154.99 - $162.66
      Universal 50 Series HD Delta Flow™ Muffler by Flowmaster®, MODERATE SOUND, 4" Thick x 9.75" Wide x 18" Case Length x 23" Overall Length. The 50 Series HD Delta Flow mufflers are big mufflers for big trucks. With 4” internal...
      # 897102
    • (0 reviews)
      $163.98$131.18
      Universal 60 Series Delta Flow™ Aluminized Steel Muffler by Flowmaster®, MILD SOUND, 2.25" Center Inlet / 2.25" Center Outlet, 5" Thick x 10" Wide x 13" Case Length x 19" Overall Length. The 60 Series increases horsepower and...
      # 897052



    Guides & Articles
    Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which provides a deeper growl with increased power through freer exhaust flow, you'll see choices between "direct fit" mufflers and "universal" mufflers. In this article, we'll help you understand the differences...
    It has been a battle of the ages to make exhaust sound like it should. Having less bends or turns will not only improve the sound but also performance. A custom exhaust is always an option for the race inspired and spirited weekend warriors. Our manufactures offer everything needed to build a custom exhaust to your preference.
    Headers are installed because the stock exhaust manifolds usually flow poorly. An exhaust header has individual tubes for each exhaust port, allowing each exhaust pulse to flow unobstructed from the cylinder head. The tubes on headers are usually larger in diameter than the runners on an exhaust manifold and the tubes are mandrel bent for gradual radius bends.
    Popular Popular Products

    1982 Ford F-250 Exhausts Reviews
    Average rating:4.54.3 - 1 reviews
    (4.3)
    APPEARANCE
    EASE OF INSTALLATION
    PRICE/VALUE
    QUALITY
    Flowmaster Force II
    2003 Ford F-250
    | Posted by | (Jeannette, PA)

    I got the Force II within a week of ordering. Came nicely packed in box that was beat up by UPS. But the Flowmaster people fortunately packed it well enough to withstand the torture of UPS personnel. Thank you. Installed the Force II system on my 03 Ford F250. Sounds great! The only tweak I had to make was to my rattling heat shields on the y-pipe going to the headers. The pipes have a nice grumbling sound, not too loud and not too soft. When you get into the pedal, it really turns heads. Hats off to Flowmaster. It really gave my 5.4L Triton a voice. I highly recommend the Force II if you're looking for a casual rumbling sound. Thanks toCARiD.com and Flowmaster.

    7 people found this review helpful.
    Was this review helpful for you? YesNo
    Share this review:
    1982 Ford F-250 Models
    • 1982 Ford F-250 Custom Performance Exhaust Systems
    • 1982 Ford F-250 XL Performance Exhaust Systems
    • 1982 Ford F-250 XLS Performance Exhaust Systems
    • 1982 Ford F-250 XLT Lariat Performance Exhaust Systems