Product Details
ML-RBS 20.2 - 32.9 V DC 500 A Off/On LED Tinned Wire Auto-Releasing Remote Battery Switch with Manual Control by Blue Sea Systems®. 500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations. Auto Releasing ML-Series Remote Battery Switch with SPST Switching Provides 500A switching and features of current ML Remote Battery Switches, but can be controlled with SPST or SPDT switch for applications where a normally open relay is desired.
Specifications
| Current: 20.2 - 32.9 V DC |
| Amperage: 500 A |
| Position: Off/On |
| Light: LED |
| Amperage Operating Current when changing state: 4A (40 ms) |
| Amperage Operating Current: 8mA when OFF / 13mA when ON |
| Cable Size to Meet Ratings: 2x (4/0) |
| Coil Function: Auto-Releasing |
| Control Circuit Connection: Tinned Wire |
| Cranking Rating 30 sec: 1450A DC |
| Intermittent Rating: 700A (5 min) |
| Live Current Switching: 300A @ 12V DC |
| Manual Control: Yes |
| Master Control Switch Capability: Yes |
| Maximum Operating Temperature: 60° C |
| Mechanical Endurance: 100,000 Cycles |
| Minimum Operating Temperature: -10° C |
| Mounting: #10 |
| Switching Cycles: 100000 |
| Terminal Ring Diameter Clearance: 1.18in (29.97 mm) |
| Terminal Stud Length: 0.875in (22.23 mm) |
| Terminal Stud Size: 3/8" - 16 (M10) |
| Terminal Stud Torque: 140 in-lb (15.82 Nm) |
| Weight: 2.07lb (0.94 kg) |
Features
- Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
- LED output to remotely indicate switch state - requires optional LED
- 3∕ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
- 7∕ 8" (22 mm) stud length accepts multiple cable terminals
- Label recesses for circuit identification
- Silver alloy contacts provide high reliability for switching live loads
Optional Accessories:
1147 - Remote Control Panel
1148 - Remote Control Panel
9160 - ML Series Link Bus
Works With
1830 - M2 DC Multimeter with SoC
1832 - M2 DC Ammeter
1833 - M2 DC Voltmeter
1836 - M2 AC Ammeter
1837 - M2 AC Voltmeter
1838 - M2 AC Multimeter
Regulatory Specifications
CE Marked - The CE marking is applied to products regulated by certain European health, safety and environmental protection legislation. The CE marking is obligatory for products it applies to. The manufacturer affixes the marking certifying that the product conforms to applicable regulations, in order to be allowed to sell the product in the European market.
Ignition Protected
IP66 - Dust tight. No Ingress of dust. Two to eight hours. Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities.
ISO 8846
SAE J1171 - Ignition Protected
Blue Sea Systems® engineers and manufactures electrical products for harsh environments in the marine, industrial, and heavy truck industries. Their engineered products are created by an in-house team of engineers who have experience in mechanical, electrical, industrial, electronic, and software design. Extensive testing is performed on all products. Blue Sea Systems` in-house lab is used to load test, thermal test, and water test products to ensure they will perform under marine conditions. Blue Sea Systems delivers innovative, reliable products for the marine industry.