DO NOT use an automatic washing machine with your Coverking Custom Seat Covers, and DO NOT use any type of bleach. However, dry cleaning is allowed, if desired.
The best way to clean these seat covers is by hand with a liquid, non-toxic, bio-degradable cleaner and clean, soft cloth or sponge at room temperature (68-85 degrees Fahrenheit).
Use a high suction vacuum cleaner to remove as much loose dirt and contaminates from cover. Then, wipe the area to be cleaned with a water-soaked, clean, soft cloth or sponge. Spot spray the soiled area of the seat cover with the proper cleaner (noted above). Gently rub the area with another clean, soft cloth or sponge until the soiled area has released the soil/contaminates.
Dry the cleaned area with a soft, dry, clean cloth and allow to air dry. You can speed up the drying process with an air blower or hair dryer set on "cool" only.
Obtain a non-toxic liquid or powder fabric cleaner recommended for laundering a variety of fabrics. Following the mixing instructions on the cleaner's package, prepare a container suitable for soaking (sink, basin, etc.) and fill with cold or warm water (not to exceed 85 degrees Fahrenheit).
Soak the Seat Cover in this mixture for a period of five (5) minutes to loosen the embedded dust and dirt particles. After soaking for five minutes, wash the Neoprene Seat Cover thoroughly with a gentle agitation for another five minutes. Finally, rinse the cover in cold water for five minutes and flat dry against an absorbent dry cloth, to soak up any excess water.
DO NOT WRING OUT COVER. Allow to air dry, either by placing flat on a dry surface or by hang drying. You can speed up the drying process with an air blower or hair dryer set on "cool" only.
If you were lucky enough to purchase a Coverking Genuine CR-Grade Neoprene Seat Cover, you can rest assured you've purchased one of the best materials for fit, comfort and style. Durability is above average but not up to the levels of Ballistic or Leatherette. Wet suit shampoo is specifically designed for cleaning and conditioning neoprene products. Cleaning with wet suit shampoo removes organic residue, micro-organisms and salt deposits that contribute to the deterioration of neoprene. Wet suit shampoo can also help prevent excessive drying, premature aging and oxidation of neoprene products. Wet suit shampoo can be purchased at most surf shops, on-line retailers etc. You can wash the seat covers while they are still on the vehicle. Use water with the wet suit shampoo as directed by the wet suit shampoo manufacturer. Use a lint-free cloth and wash your seat covers. Rinse your seat covers with fresh water and pat dry with a towel.
To clean Cotton Seat Covers, simply remove them and hand wash or machine wash in the gentle cycle with a very mild detergent such as Woolite. Air dry, do not machine dry.
To clean Spacer Mesh Seat Covers, simply remove them and hand wash or machine wash in the gentle cycle with a very mild detergent such as Woolite. Air dry, do not machine dry. Do not use an iron.
Leatherette is actually very durable and stands up to harsher conditions than Saddleblanket, Neosupreme and even Genuine Neoprene materials. It is very soft to the touch and has a great look once installed. Clean up can usually be accomplished with a sponge and good leather/vinyl cleaner, negating the need of a washing machine.
To clean Neosupreme, simply remove them and hand wash with a very mild detergent such as Woolite. Air dry, do not machine dry. Do not use an iron.
Coverking's Ballistic™ Custom Seat Covers are made from the same super tough material used in soft-sided luggage. It is designed to protect for years, protecting the original seats from all the toughest life can throw at them; Sliding in and out with tools in the back pocket, sharp dog and cat claws, kids throwing food and drink, and other hazards that would cause a vehicle owner to cringe.
To clean Ballistic material, simply remove them and hand wash with a very mild detergent such as Woolite. Air dry, do not machine dry. Do not use an iron.
Saddleblanket will stand up to moderate abuse, is very breathable but should not be counted on to block fluid spills or pets with claws.
To clean Saddleblanket Seat Covers, simply remove them and hand wash with a very mild detergent such as Woolite. Air dry, do not machine dry. Do not use an iron. Take extra care with the thick Saddleblanket fibers.
Your Coverking Custom Car Cover will need to be cleaned periodically to maintain its protective abilities and good looks. Dirt and dust on either side of the cover can degrade its performance to repel moisture. On the underside of the cover, over time, this dust acts as an abrasive that can scratch the vehicle's surface.
All Coverking Custom and Universal Car Covers are made with fabrics that are inherently easy to keep clean.
To clean dust and dirt form the top of the cover, install the cover on your vehicle. Hose off the loose dirt, then wash the cover as you would the actual vehicle, using a soft sponge or cloth in water with a mild, bio-degradable cleaner. Hose down the cover again with water and hang dry.
To clean dust and dirt from the underside of the cover, reverse the cover and place it on the vehicle and hose off the loose dust.If necessary, wash it further with a soft sponge or cloth soaked in water with a mild, bio-degradable cleaner. Hose down the cover again with water and hang to air dry. Again, DO NOT wring cover.
To get the best results when cleaning your Coverking Car Cover will be obtained in temperatures of 68-85 degrees Fahrenheit. Please use a non-toxic, liquid, bio-degradable cleaner and clean soft cloth or sponge. Wipe the car-cover area to be cleaned with a water-soaked, clean soft cloth or sponge. Either spray or immerse the soiled area of the car cover in the your cleaner mixture. Work into the fabric with another clean, soft cloth or sponge until the soiled area is gone.
The best way to clean these covers will be obtained in normal room temperatures (68-85 degrees Fahrenheit).
Please use a non-toxic, liquid, bio-degradable cleaner, clean soft cloth or sponge.
Use a high suction vacuum cleaner. to remove as much loose dirt and contaminates as possible from either side.
Wipe the seat cover area to be cleaned with a water-soaked clean soft cloth or sponge.
Either spray or immerse the soiled area of the seat cover in the proper mixture of cleaner.
Work into the fabric with another clean, soft cloth or sponge until the soiled area has released the soil/contaminates.
Dry the cleaned area with a dry soft clean cloth and allow to air dry. You can speed up the drying process with an air blower set on "cool" only.
Obtain a non-toxic liquid or powder fabric cleaner recommended for laundering a variety of fabrics. Following the mixing instructions on the cleaner™ package, prepare a container suitable for soaking (sink, basin, etc.) and fill with cold or warm water (not to exceed 85 degrees Fahrenheit).
Soak the Cover in this mixture for a period of five (5) minutes to loosen the embedded dust and dirt particles.
After soaking for five minutes, wash the cover thoroughly with a gentle agitation for five minutes. Rinse your cover by using cold water for five minutes.
Flat dry the cover against an absorbent dry cloth to soak up excess water. DO NOT wring cover.
Allow to air dry, either by placing flat on a dry surface or by air drying. You may speed up the drying process with an air blower set on "cool" only.