Name: MBRP® - Installer Series™ Aluminized Steel Cat-Back Exhaust System with Split Rear Exit
Brand: MBRP
SKU: mpn4633865975
Price: 464.99 USD
Availability: OutOfStock
Rating: 5 (1 reviews)

Vehicle Fitment

Make	Model	Year
Chevy	Silverado 1500	2019-2024
GMC	Sierra 1500	2019-2025

Product Details

Installer Series™ Aluminized Steel Cat-Back Exhaust System with Split Rear Exit (S5065AL) by MBRP®. Exhaust System Type: Cat-Back. Exhaust Tubing Material: Aluminized Steel. Main Tubing Diameter: 2.5". Exhaust System Sound: Moderate. Made of 100% heavy gauge aluminized steel MBRP Installer Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Installer Series is suitable for areas with moderate environmental conditions.

Notes

Uses Factory Bezels
Remember to check your local and state laws regarding vehicle noise restrictions

Specifications

Exhaust System Type: Cat-Back

Exhaust Tubing Material: Aluminized Steel

Exit Location: Split Rear

Main Tubing Diameter: 2.5"

Exhaust System Sound: Moderate

Muffler Quantity: 1

33% increased Flow

+8 HP and +7 ft/lbs Torque

Features

Boosts horsepower and torque
Mellow, authoritative exhaust note
Aluminum-silicon coated welded seams
16 GA aluminized steel construction
Can improve economy 1-2 mpg
Mounts from OEM hangers
Installs with simple hand tools
3-year warranty

You can expect these aluminized steel pipes and mufflers to fit just as precisely, and to deliver the exact same compelling sound and performance increases as the Pro Series, at a substantially reduced cost. The first thing you'll notice will be the rich, mellow sound delivered by the chambered muffler. The second thing you'll notice is the improved performance as lowered backpressure and improved scavenging let your engine deliver more power and torque. The third thing you'll notice is more money in your pocket after you fill up.

MBRP's performance exhaust systems are built to perform. Every system has been built to the most exacting standards in the industry. MBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box.

With all the tubing mandrel-bent without reducing its cross-section, and every bend made to the minimum bend angle, MBRP exhaust systems can substantially reduce backpressure through the system. You don't need to expend horsepower forcing exhaust gases through a pinhole, and improved scavenging of those same gases means more mixture drawn into the cylinders for more power. It's a win-win deal. The muffler is a chambered muffler, not a short-lived glasspack that will get much louder if it ever gets wet inside. MBRP engineers all of its systems to fit perfectly the first time. You'll be able to install your MBRP exhaust system with nothing more than simple hand tools.

MBRP Inc. has been in custom exhaust systems business for over fifteen years. The milestones in the evolution path of the company remain unchanged: superior performance gains, long-lasting product quality and customer responsiveness. First success came with the now famous B&B Eliminator, the bestselling performance snowmobile silencer of all time. Focusing on the right things on its way to success, MBRP inc. is now at the forefront of performance exhaust technology with the breakthrough line of performance diesel exhaust products and new sport line of products for gasoline-powered vehicles. The commitment to the clientele knows no limits at MBRP inc. and is easy to feel – from the lowest SKU/ vehicles supported ratio to variety of exhaust materials to choose from for any budget. Not to mention the easy installation of the products, well-engineered to bolt on over the factory bearings and supported by detailed user manuals and toll-free technical support line to help even the least experienced installer.

Brand:

MBRP

Part Number:

S5065AL

UPC:

882963127464

Alternate MPN:

S5065AL

Installation

MBRP® - Installer Series™ Aluminized Steel Cat-Back Exhaust System Installation Instructions

Warranty

The MBRP Inc. products are covered by a Limited Warranty, during which its products are warranted to be free from defects in material or workmanship. The Warranty period begins on the date the product is delivered.

The Warranty is granted to the end-user and applies to products which are purchased, installed, and used for the purposes for which they are originally designed. This Warranty covers defects arising under normal use and does not cover malfunctions or failures resulting from misuse, abuse, neglect, improper installation, or incorrect maintenance.

During the Warranty period, MBRP Inc. will repair or replace, at no charge, a product that is defective in materials or workmanship. MBRP Inc. reserves the right to either repair or replace a defective component at its discretion and reserves the right to substitute an equivalent product under the terms of this Warranty.

MBRP Warranty Terms

(304) Pro Series: Lifetime Warranty (Excludes discoloration that may develop from heat)
(409) XP Series: Lifetime Warranty (Excludes surface rust that may develop. A stainless-steel cleaner can be used to keep tip clean)
(AL) Installer Series: Three (3) Year Warranty (Surface rust and penetration rust are not covered)
(BLK) Black Series: One (1) Year Warranty on the finish; Three (3) Year Warranty on the system (Surface rust and penetration rust are not covered)
SLM Series: Five (5) Year Warranty (Excludes surface rust that may develop. A stainless-steel cleaner can be used to keep tip clean)
PLM Series: One (1) Year Warranty (Surface rust and penetration rust are not covered)
(P) Performance Series: One (1) Year Warranty (Surface rust and penetration rust are not covered)

Tip Maintenance: Your 304 Mirror Polished Stainless-Steel tips are not a maintenance free product. For best results - use a chrome polishing or stainless-steel cleaner to maintain the shine and rust. Warranty on this product and MBRP black coated tips covers defects in the material and workmanship only, and does not extend to pitting, stone chips, or other damage. MBRP recommends the use of mud flaps and encourages regular cleaning and maintenance to assist with reducing any changes to appearance due to road treatments

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(1)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

MBRP® - Installer Series™ Aluminized Steel Cat-Back Exhaust System with Split Rear Exit

1-1 of 1 Reviews

Sort by

5 of 5

As Promised

MBRP® S5087AL - Installer Series™ Aluminized Steel Cat-Back Exhaust System with Single Side Exit

New exhaust was simple to install, taking out the old was somewhat cumbersome but manageable. Did the entire process by myself. New exhaust sounds great, actually picked up about 1.5 miles to the gallon on average. If I were to do it over I would go with the stainless version to avoid long term issues but the "installer series" delivers as promised. Timely delivery, well packed, easy instructions.

Posted by Tim (Issaquah, WA) / June 05, 20192019 Chevy Silverado

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!