Engine Cooling Reviews

Fits perfectly and no leaks.

Fit right in, no modifications needed.

After noticing some coolant leakage, I opted for this Replace reservoir. I am thoroughly impressed by the quality and fit. It was a direct replacement for my 2012 Acura TL, and since then, my coolant system has been working flawlessly. Highly recommend for those in need!

Never changed a radiator before, this definitely went in easy. Literally, plug and play.

Very satisfied with everything from day one, talking to you guys on the phone, talking about all my options. Your staff definitely knows the products very well. The dollar wasn't an issue for me, I wanted the best and I knew where to go to find it. The product itself talked a high volume to me. I can tell it was made of better quality in comparison to the original as soon as I pulled it out. It was packaged the way I hoped and all its fins were straight, hardware was on point and the installation was easy. 6 packs of beers and take your time. My car runs better and the temperature needle sits more on the cooler side than it originally did, so I am definitely happy. CARiD.com rocks!

It's what I was expecting it's working great and work wonderfully.

Bought this for my 1969 Cutlass, cooling was a big issue for me since the car would be on the high side of 180-190 Deg after very little diving. Now on an 80 degree day my cutlass runs 170 degrees easy. No overheating. Install was a breeze fit right in with no mods. You may want to get some rubber spacers for the bottom radiator hose since the stock diameter is a bit bigger than 1.5".

Direct and easy bolt in replacement. Comes with all new mounting hardware. Top bolt grommets and bottom mounts included. New clips and o-rings included in the trans line quick connectors. 2001 Chevrolet 2500HD 6.0L. I deleted the engine oil cooler during the swap so this radiator does not have an engine oil cooler like my factory one did.

This radiator is as close as OEM as you can get. Denso makes the OEM part for Toyota. The only this missing is the Toyota name on the part. Simple straightforward installation. No need to fabricate brackets, bolt-on. Keep your truck as original as possible with this part.

Very pleased with product and service

Great product, worked perfect!

This water pump looked like what it was described as. It was the correct one for my 2008 4.6l F150 truck, it installed very easy. When the time comes to replace the water pump I will certainly buy another one without delay.

Shipping fast, exact match.

Excellent fit and function. Quiet running and good air flow. Thanks for the quality product.

When my OEM Ford Ranger radiator tank cracked, I opted for the K-Metal all-aluminum one. Remove the old, flush the block and heater, install the new K-Metal and I'm running cooler than I have in a decade with this truck! I'll have to post a long-term review next year.

I'm not a mechanic though I'm handy and have plenty of tools. After watching Atlantic British videos on YouTube I decided this is something I can do to stay in budget. After power washing oil off the area I spent the first day removing the fan clutch assembly which required a large narrow wrench (I chose to use a large crescent wrench) and removed the old water pump. Next I cleaned the area again with the power washer. Next day I installed the new pump with gasket noting which bolts came out of which position, then removed the protective plastic thread collar on water pump and reinstalled the old fan clutch assembly. The only frustration came trying to keep the gasket in place while positioning the new pump. Some gaskets come with a tacky side to stick to the pump or engine side and that makes it easier to keep it lined up. Future suggestion perhaps.

This product is exactly like the OEM part, and fits and functions the same. Great OEM replacement.

The kit came complete with all hoses needed except for the heater hoses. That is understandable since the factory heater valve is molded to those hoses. Overall, I am very satisfied with the kit. The clamps that come with the kit could be a little better. (They aren't as good as the original clamps)

Looks great. Excellent quality. Ease to install.

I was looking around to upgrade my 2009 toyota corolla radiator since my old had broken due to extrema cold weather and me driving for almost daily 12 hours. After doing the installation I can say very happy how it working feel brand new car

This is a great radiator, awesome when it comes to quality nice colors and even better material. I'm glad I bought mine's here! It was very easy to install, I guarantee you will be very satisfied.

Great for diagnostic standpoint and it looks great.

Easy install perfect fit.

An excellent Hi-performance upgrade to cool my super sport engine build. It runs the engine much cooler than an ordinary radiator and it looks great in the engine box! A top quality part that is durable and works, and stands up to the best of it.

Better than OEM thermostat and won't have much of a hassle of getting air out of the cooling system. Works really good and keeps my car under 185 compared to OEM thermostats that keeps it at 220 which burns out parts that way. This thermostat is 10 outta 10!!

Thanks! Easy and quick to order. Arrived ahead of schedule.

Pros: 1. Direct fit, no modifications required 2. Easy to fit, slides in easily. 3. Double layer for the middle part protection, double layer rubber instead of the fabric mesh. Cons: 1. Too thick to slide back the OEM clamp after fitting, needed to buy a generic screw clamp. 2. Does not look like the picture shown,double layer rubber instead of the fabric mesh.

Shipping was great, no damage to the box, great packing. Installed this a right off the bat i noticed that the cooling was staying nice and low and i live in Arizona, c5 vetts over heat here, my temps used to be at 220-225F when moving and if i cam to a stop, temps will start to rise Now they stay under 195F-207F when running or when i come to a stop this time of year is super hot out here around 115F weather this radiator is doing its job

Nice quality water pump from GMB. I've used GMB pumps for years, so when I found this pump hear on Carid.com at this price, I bought it immediately. It even came with replacement bolts with 10mm hex socket heads to replace the strip prone button head torx bolts that are factory on Volvo. Everything went together great with no leaks.

The product looks great, packaged well in a clear carton so that you can clearly see it. Installation was a snap. The product looks like it is well constructed and made of stainless steel.